Question about Dishwashers

2 Answers

How to reset whirlpool dishwasher adp4501/5

How to reset whirlpool dishwasher adp4501/5. thank's

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Whirlpool dishwasher problem adp 4501 - I had a problem with this machine not starting properly, hunting, with the start light flashing apparently continuously the pump also going on and off in time with the flashing.
After looking around a number of forums I cleaned out the sump gently with a sponge which did not help, then followed this up by pouring a kettle of boiling water into it. This had no immediate effect, but after a few hours the machine started and ran properly again.
Cost no money and saved me the hassle of taking it out and stripping it down - well worth a try.

Posted on Sep 19, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 26 Answers

Switching it off at the mains will reset the machine.

Posted on Oct 28, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HOW TO RESET MY DISHWASHER


All you can do is turn the power off at the power point, leave it for a few minutes and then switch the power back on.

Jan 11, 2016 | Dishwashers

1 Answer

I have a whirlpool quiet partner II dishwasher model # DU1055XTVB5 and the normal light is steady flashing I have did the sequence to reset HEATED DRY NORMAL HEATED DRY NORMAL and the normal light...


Angelia:
Thank you for your review.
We would like to inquire further about your review with you. Please respond back to this email address, Whirlpool_Reviews@Whirlpool.com, with your name, phone number, street address, zip code, model & serial number, and date of purchase on the appliance.
We look forward to your reply.
Thank you,
Whirlpool® Social Media Relations

Mar 06, 2018 | Whirlpool 24 in. DU1055XTP Built-in...

1 Answer

My quiet partner 111 whirlpool dishwasher is flashing clean


Hello.
Manufactured by Whirlpool, Kenmore dishwashers have an electronic control panel that must be unlocked in order to set or make changes to your dishwashing cycle. If an error light is blinking on your dishwasher's control panel, the panel must be reset before you can gain access. Blinking lights on your dishwasher control panel may signal a mechanical problem that needs to be repaired. If the lights continue to blink after you've reset the control panel, contact Sears to service your Kenmore dishwasher or consider troubleshooting the appliance yourself.
1Press and hold the "Heated Dry" button on your Kenmore dishwasher for four seconds to unlock the dishwasher control panel.
2 Press the "Heated Dry," "Normal Wash," "Heated Dry" and "Normal Wash" buttons one after the other, in fairly quick succession.
3 Wait for the dishwasher to run a short diagnostic test.
4 Press the "Cancel/Drain" button at the end of the diagnostic test cycle. This should reset the control panel on your Kenmore dishwasher.

Thanks.

Nov 04, 2011 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Hi I have a Whirlpool dishwasher ADP5740, Condenser. My grandson pressed the start button before I had set a programme, now the light is stuck on the pre-wash and the start light is flashing and it...


If you have a reset or cancel button try that. Look in your manual for a reset
procedure or troubleshooting section. It is just stuck in a cycle and needs to be reset
or cancelled.

Marty Mouse just a housewife.

Jun 05, 2011 | Whirlpool 24 in. GU3200XTP Built-in...

1 Answer

Whirlpool dishwasher model# DU915PWSS0 S/N# DE3960705 reset procedure? The problem: dishwasher will not start the only buttons that will light up when I push them are heavy, rinse only, and heated dry. I...


  • Turn off the dishwasher and unplug it from the power supply. Wait 10 minutes and restore power.

  • 3

    Select a "Hi Temp" wash cycle, followed by a heated dry setting on the dishwasher.

  • 4

    Repeat step 3. This will reset the dishwasher.



  • May 11, 2011 | Whirlpool Dishwashers

    1 Answer

    How do u reset the dishwasher


    Hi,

    Please provide us the model number for which you want the information so that we can assist you better.

    Waiting for more info.

    Thanks

    May 15, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

    1 Answer

    I have a Whirlpool Dishwasher Model #GU240CXTPB1. The normal light won't stop blinking. Tried turning the breaker to reset, but still blinks. No other button works.


    Whirlpool dishwasher reset sequence is usually to hit the heat dry then normal then heat dry then normal buttons within 5 seconds and it usually resets.

    Mar 22, 2010 | Whirlpool GU2400XTP Built-in Dishwasher

    1 Answer

    How do i reset my dishwasher adp4504 . i have kept my finger on the start button but just keeps on flashing


    Hi!

    Try pressing sani rinse and heated dry back and forth. All the lights will light and it will reset itself.

    Please see this link for more information---

    Whirlpool dishwasher reset

    Please rate the solution if found useful.

    Thanks
    Rylee

    Feb 24, 2009 | Whirlpool 18 in. ADP530 Free-standing...

    2 Answers

    Model # DU1055XTPQ3 WHIRPOOL DISHWASHER RESET CODE


    chris72 had the solution to my Whirlpool DU1055XTPQ3 not turning on. Per Chris's suggestion, I pressed back and forth between sani rinse and heated dry. All the lights came on as it reset and it was good to go. The dishwasher started up immediately. Saved me a service call, THANK YOU Chris!!

    Aug 07, 2008 | Whirlpool 24 in. DU920PW Built-In...

    Not finding what you are looking for?
    Dishwashers Logo

    Related Topics:

    2,421 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dishwashers Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    yadayada
    yadayada

    Level 3 Expert

    79024 Answers

    Brad Brown

    Level 3 Expert

    17093 Answers

    Are you a Dishwasher Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...