Question about Computers & Internet

2 Answers

Printer says it has completed the job, but I get a blank white paper (no printing on the pape).

Posted by on

  • Jeff
    Jeff May 11, 2010

    What program are you trying to print from? Can you do a print preview?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 499 Answers

U need to check the print setup ( the printing must be not light make it as default) also u need to clean the pins of ur printer and the pins of ur cartridge with Aciton (when ur printer is off) if this not work try to shake ur cartridge about 5 times (to the right and to the left) if this not work u need to change it
hope this helpful

Posted on Jul 26, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 206 Answers

Make sure your settings are correct and the printer configurations are also correct which supports your configurations available

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Print Job Keeps Cancelling


your computer may not be able to provide that high of a resolution to the printer. It would be like trying to take a color picture with black and white film.

Apr 17, 2014 | Epson WorkForce WF-3540 All-in-One Printer...

4 Answers

When asked to print my c5180 all in one ejects blank sheet of paper making no attempt to print


Just click below for more information;

s.gif » Macintosh: All-in-One Ejects Blank Page or Pages in Mac OS X V10.4
Mac OS X V10.4: A blank page or pages emerge from the product when it is turned on. s.gif » A Blank Page Prints at the Beginning of Every Print Job ...
A blank sheet of paper prints at the start of every print job. s.gif » Load Paper
Instructions on loading paper and envelopes. s.gif » When I Try Printing in Windows Vista, My Printer Is Not Available in the List of Printers ...
Windows Vista: The product does not appear in the printers folder when attempting to print on a network. s.gif » HP Photosmart C5180 All-in-One Printer: Manuals
... HP Customer Care | HP Photosmart C5180 All-in-One Printer | Product information HP Photosmart ... One Printer | Product information HP Photosmart C5180 All-in-One Printer: Manuals About these files: These

Hope this may help;

Regards,
VOTIT

Aug 23, 2008 | HP Office Equipment & Supplies

1 Answer

Printer full of ink, but will pring pages either blank of with smeared ink.


Follow these steps to check the print settings for your print job.
  1. In the software program you are trying to print from, click File and then click Print . The Print dialog box opens.
  2. Select your product, and then click Properties . The printer Properties dialog box opens.
  3. Click the Printing shortcuts tab.
  4. Under Printing shortcuts , click the type of job you are trying to print.
  5. Review the following options, and then make any necessary changes.
    • Paper size : Make sure that the selected option matches your paper size.
    • Paper type : If one of the options matches your paper type exactly, select that option.
    • Print quality : If you are not satisfied with your printed page quality, or want more densely printed prints, increase the print quality. To print more quickly, or for lighter prints, decrease the print quality.
  6. Click the Features tab.
  7. Check the Print in Grayscale setting
    • If you are trying to print in color, select Color Options , and then make sure that Print in Grayscale is not selected.
    • If you are printing a black and white image, select Print in Grayscale to fix streaking in black areas.
  8. Click OK , and then click OK again to start the print job.
Make sure the printer is loaded with unused white paper.
Open HP Solution Center , then click Settings , then Printer Toolbox .
Select the Services tab.
Click Print PQ (print quality) Diagnostic Page .

Make sure the printer is loaded with unused white paper.
Open HP Solution Center , then click Settings , then Printer Toolbox .
Select the Services tab, then click A- Click Align Printheads or
B- Click Clean Printheads .
C- Click Calibrate Linefeed .

If, after repeated printhead cleaning, the Print Quality Diagnostic page shows white lines across the color blocks in Test Pattern 2 (but no white lines in the gray blocks in Test Pattern 3), one or both of the printheads will have to be replaced. The Print Quality Diagnostic page shows which printhead should be replaced.









Try using the HP Scan Diagnostic Utility in Windows - HP Customer Care (United States - English)

Nov 16, 2010 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

Printer is not printing anything at all..black or color. Cartridges travel back and forth and paper is pulled into the printer just like it is going to print. But, the paper comes back out completely...


Make sure the sealing tape is completely removed from the print heads (the silver part on the bottom of the cartridge). Then press the print head against a paper towel to get the ink flowing. If that doesn't work, try cleaning the cartridge electrical contacts in the printer and on the cartridge with isopropyl alcohol followed by water.

Dec 19, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

When I turn on my HP C6180, it wants to align the printer. When I do that, I get a "Paper Mismatch" "Pape size or type is incorrect" "Job cancelled". Trying to print anything results in the same thing....


mostly yes, the sensor is what is responsible for paper alignment. how ever you can try keeping an a4 size as all the printers tend to adopt default settings and work with it. place your paper correctly in position and then you can select the a4 and try printing a page.

Dec 09, 2009 | Nikon COOLPRINT Thermal Printer

1 Answer

Computer says printer is out of pape when paper tray is full


Nothing to worry. There's no paper in the printer. Fill the papers up in the printer and start printing...

Feb 07, 2009 | HP Photosmart 2610 All-In-One InkJet...

1 Answer

PRINTS BLANK(NOTHING APPEARS ON THE PAPER)


I don't know you talking about color printer or black/white or copier that is all difference, if copier, you have go to check the charge&discharge corona wire if black/white printer you have check the image roller both end contact is clean,

Dec 11, 2008 | Sharp AR-5320 Black and White Copier

1 Answer

HP laserJet 2100 prints blank from manual tray


I bet you have a bad USB wire.Change the wire and I suggest reinstalling the drivers.

Oct 31, 2008 | HP LaserJet 2100 Printer

1 Answer

Extra paper pulled


Some rubber lining or rollers is out of line, if you can fix that it may work properly.

Oct 24, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Error 9-363


NOTE: The problem occurs because of the trickle development system in the machine, making extended lengths of black and white copies / prints does not allow the black developer housing to purge itself of excess waste Toner (Dry Ink) and Developer. There are two solutions for the problem:
  • Make 1,000 copies / prints of a black and white job, then make 150 copies / prints of full color. Continue making 1,000 copies / prints of the black and white job, then 150 full color, and so on, until the entire black and white job is complete.
  • Make extended jobs in groups of 100 by making 100 copies / prints of the black and white job, then allowing the machine to cycle down (return to 'Ready') and making the next 100 copies / prints. Continue in this pattern until the entire black and white job is complete.
NOTE: The above solutions are based on jobs using 8.5 x 11 inch paper, single sided, with no more than 28% coverage.

Feb 18, 2008 | Xerox DocuColor 12 Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...