Question about Husqvarna Huskylock Computerized 910
Always turn the handwheel towards you. There may be an arrow on the side. (Looking from the right it should go counter-clockwise)
Unthread the needles.
Make sure that the needles are new or good (not old or bent).
Make sure that the needles are inserted with the flat side to the back and all of the way up. The left needle will be higher than the right.
Make sure that the loopers are correctly threaded and under the foot.
Place the needles in the highest position and rethread the needles.
The loopers MUST be threaded before the needles in order for it to sew.
Make sure that the threads are pulled fully down into the tensions.
Posted on Jul 26, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Are you sure the tension is right? You might need to push the thread hard against the track after leaving spool going into the machine (until it clicks). I had that problem also. Hope that helps.
Posted on Jun 27, 2008
SOURCE: Maintenance on Huskylock 910
You never need a diagram to oil a sewing machine. Turn the hand wheel and look for every area that metal touches metal. 1-2 drops (more Is Not better) of oil everywhere metal rubs metal, use a flashlight and look and oil look and oil until every spot is oiled.
Posted on Mar 18, 2009
Your local Husqvarna dealer can order a replacement manual for you and may even be willing to teach you to use it for a nominal fee.
Posted on Sep 06, 2009
Tips for a great answer:
Aug 25, 2011 | Husqvarna Huskylock Computerized 910
Sep 12, 2009 | Husqvarna Sewing Machines
Sep 03, 2009 | Husqvarna Huskylock Computerized 910
Jun 23, 2008 | Husqvarna Huskylock Computerized 910
May 20, 2008 | Husqvarna Huskylock Computerized 910
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: