Question about KitchenAid Architect Series KEBC107KSS Electric Single Oven

1 Answer

General Electric Double oven wall unit

The top oven will not heat (bottom element), and neither will the broiler element. I changed the bottom element about 4 years ago and worked fine--now it will not heat. Do the elements need to be changed or could it be something different? The lower oven is just fine.

Posted by on

  • 1 more comment 
  • velmscott Jan 20, 2009

    I have a double oven, GE model JK 25005WH, serial # AP 602520G. A service man told me that he thought I needed a Thermostat. He was told that they (the stores in Ohio) do not carry them anmore. Where can I find a thermostat for this older oven? It's the top oven. The bottom oven works great.

  • Anonymous Mar 16, 2014

    my broiler just stopped working on my kenmore electric range model665.95173300. top and bottom element won't heat up but when I put the oven on the bottom element will heat up but not the top element.

  • Anonymous Mar 24, 2014

    heating element on the bottom of the oven blow out and broke.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Id say something different like a thermal fuze or relay

Posted on Dec 29, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why don't top oven broiler and bake elements heat?

we had that problem once. it turned out to be the control switch was broken

Apr 10, 2016 | Kenmore 27 in. Electric Self-Clean Double...

1 Answer

Frigidaire double convection wall ovens, model GLEB30T9DSA ... The top oven will not heat, both the bottom element and the broiler.....

I have the Frigidaire PLEB30S8CCA single wall oven. About 3 months ago the baking element appeared to have gone out. We replaced it, but still didn't work. We ended up sending our control board off to a company named Corecentric. They fixed the problem and returned it to us. The oven has worked perfectly ever since. I searched extensively for a new one, but no one sold them anymore. I found Corecentric on Ebay. They were able to confirm over the phone that it was more than likely a control board issue. It cost about $130. My husband was able to do it himself by taking a couple before px and using them when reassembling it.

Apr 04, 2014 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

Hotpoint 24in double electric wall oven 20RJ83D not heating, element is working

The thermostat for the upper element has gone bad. Needs to be replaced.

Apr 15, 2017 | Ovens

1 Answer

Dacro Wall oven (electric) does not heat past 345 degrees on bake or convection bake but broiler works and bottom oven works fine (for bake, convection bake and broil).

it could be the oven temp sensor rod located near the top of the inside of the oven,or possibly the bake element has a hot spot on the element and can no longer pass enough current thru this spot to correctly heat to your settings a hot spot on the element will look discolored in this area

Jul 28, 2012 | Dacor Ovens

1 Answer

Broiler doesn't turn on completely

The top element should come on when Broiler is selected. If both ovens have a broiler mode, then look for something failed in the circuit for the broiler heating elements (it's unlikely both broiler elements would fail together.). If there is only 1 oven with a broiler, look for a failed broiler element.

Dec 17, 2009 | Viking 27" Professional Select Built-in...

1 Answer

Bosch convection double oven,ovens won't heat,only broilers work

If it is fan assisted then check the fan element, it is located behind a panel at the rear of the oven compartment.
Plz rate my\solution.

Dec 17, 2008 | Bosch Ovens

1 Answer

Oven will not heat - Thermador SMW272 Electric Oven

since you said the broiler does work , take the wires off the broiler element and put on the bake . then when you put on the broiler the bake should work . the light bulb principle, just remember to wrap all loose wire with electrical tape and disconnect from wall while working.

Dec 12, 2008 | Thermador SMW272 Electric Double Oven

3 Answers

Frigidaire GM deluxe electri dean (electric oven wall unit)

if you feel through the insulation you can find the two wires that attach to the element pull them through to plug the element back on but there is no plug per say but first are you sure the element is good were there no wires on the element when you removed it should have been two spade connectors with wires on them attached to the element hold my rating till you reply

Jan 11, 2008 | Frigidaire FEB27S5A Electric Single Oven

Not finding what you are looking for?
KitchenAid Architect Series KEBC107KSS Electric Single Oven Logo

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers


Level 3 Expert

417 Answers


Level 3 Expert

78010 Answers

Are you a KitchenAid Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides