I connected the stereo in my car about a year ago and I put a code on it, now that I want to change the stereo into my pick up, it is asking for the code and I cant remeber it. I tried many but I can't seem to get the right one.Would any one know if I could reset the code and how?
I have a kenwood ddx 7015 and need the lock code....I took the radio out of my truck and wanted in my car but it locked up and i have no memory what the code was....PLEASE HELP
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it asked for the pin code, it had spent a while without any power feed to it. Slide it out to get to the wires behind it. Check the power wires and any fuse connections to it (usually red wires) by wiggling them and see if it comes on briefly, (it will ask for code again). Wires may be damaged, pinched or corroded. To see if its wires in car or the stereo, take the stereo out of car and connect to a car battery on a table to see if its fine (it will ask for code).
If you still have the remote, you can try the basics, First try 012345 sometimes thats all it takes I know on my 9312 that will overide the rest of the radio and allow me into the sub menu to fiddle with the radio. if that dosent work then enter 00000, 11111, 99998, 55555 or something along those lines most default codes are as simple as that. if that dosen't work, you will need to contact the installer and see if they had put in an anti theft code, and find out if trhey keep records of it
no, this radio has no security code... Check to see that you have power on the yelow wire at all times, Power on the red wire when the key is on, and make sure the black wire is grounded well. something could have been disconnected at the paint shop.
go to the radio press setup on your remote then press 543210, a secret screen will pop up press the hammer and skrewdriver,u will see brake overide put it on the on position,thenpress the X at the bottom of the screen,then your all set.
Try this for the tuner fix. Turn unit on.Hold down (volume down and SRC )buttons and unit will power off.Keeping them in also press and then release the reset button(bottom right hand side) .Release the other 2 buttons and unit should now restart with 50khz fm spacing and 9khz am spacing.If you find out how to change region code,Post It