Question about Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool quiet partner II has power but will not run

We replaced a faulty water heater and operated the dishwasher and unknowingly ran the dishwasher with luke warm water. I understand this model has a feature that locks the control panel in order to deal with water thats not at the correct temp. The control panel has power to it but will not light up or react when the buttons are pushed. I need some help, insight or advice.

KC

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Please go to this site and locate your manual.
http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=GU2400XTP&siteCd=WHRCOM

They have lots of information about your unit.

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool quiet partner ii clean light flashing 7 times. I installed a new heating element and reset the code, and it still flashes 7 times


Hi,

Check the main control for the heater relay, this may be faulty and the cause of your issue. Good Luck

Mar 30, 2016 | Whirlpool Dishwashers

1 Answer

Whirlpool quiet partner II stops running or won't complete it's was cycle, sometimes is will wash for a few minutes and stop or it will stop before the water even starts to flow.


I had the same problem with my dishwasher. After hearing that the motherboard was the problem I decided to take a closer look. There were two capacitors (1000 microfarads, 6.3 volts) that looked a little suspect. The tops of capacitors should be flat...these looked like soda cans that had been left in the freezer. Got on eBay, located the capacitors for roughly $3 and $4 shipping, for approx total of $10. Soldered the two new capacitors into the motherboard and put it back together. As soon as I closed the door, the dishwasher started draining the water. When I ran a Normal cycle it completed successfully. Saved myself over $120!

Aug 02, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Whirlpool quiet partner ii dishwasher has quit working. Power is getting to the dishwasher but it is not coming on at all. There is water standing in the bottom of it and a very foul smell is present.


This dishwasher has a thermal fuse that attaches to the main control board that may have failed, it can be tested with a meter for continuity if it does not have continuity then it is your problem.

Apr 21, 2012 | Whirlpool Dishwashers

1 Answer

Quiet partner ii just stopped


Most likely it has an internal fuse or relay gone bad. Check the curcuit w/ a "glow stick" power identifier available at Lowes or Home Depot.

Aug 20, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Water not draining whirlpool quiet partner ii


Remove the drain line where it hooks into the disposal. See if the plug, which must be removed to let water thru, is still in there. I ran into this on a service call a few years back. Removed to plug and voila! Hope this helps!

Jan 13, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Quiet Partner II not washing or sensing.


I have a whirlpool quiet partner II and for some reason it does not drain the water out any more and I cannot figure out why....people say that it is the filter but that is unbelievably hard to get to and I cannot find any instructions online or paper work that tells how to break it down. If anyone has any insight please let me know

Nov 16, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Its not working at all!


Sounds like the main wash/circulating pump is faulty

Jul 08, 2007 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...