cant figure out how to get the thing apart, have all screws of back out from inside as well as screws that hold control unit and separate white/red section, but cant slide the whole thing forward. any idea how to proceed to get at the fan behind the red wine section?
thanks
wayne
Comments:
Jul 31, 2009
- i had same problem. to get at rear fan, you need to remove the center control unit shelf, take out side screws into wall, take out top screws of control panel, slide off top of control panel shelf , disconnect wiring harness, (make sure to mark or draw all connections for reassembly), slide out control panel shelf, take out all screws from back panel, push wiring harness through back panel hole, remove back panel to remove the fan. the power to fan is part of the wiring harness (leads are the long black/red pair with a white connector that pushes onto the main control circuit board). Looks like a computer cooling fan to me but is unmarked so cant tell. will update if/when i find a replacement fan
Upper Fan replacement - I have removed all screws holding the back plate in place. I cannot remove...
(More)
Upper Fan replacement - I have removed all screws holding the back plate in place. I cannot remove it to replace the fan since the large section holding the electronics is in the way. Am I missing something in order to get access to the upper fan????