Question about RCA D52W19 52" Rear Projection Television
RCA 52" projection TV purchased from WalMart. Mfg. date October 2006. My TV has trouble when it is first powered on. The picture and sound comes on then goes off about two or three times then it powers itself completely off. It has to set several minutes before you can attempt to power it on again. After it does power up it works fine. Bob 205-681-5509
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: RCA Projection TV won't turn on
Ok you got you a Rca ITC222 I See ALOT of these things. To start the troubleshooting.. UNPLUG the set for a min of 30 min the plug back up. ( I have never seen this work) If the set stil fails to come on then you have a processor lockup. The first thing you can conclude if the light flashes is it is NOT a FUSE. THe sets processor has determined that a safety condition has occured and shuts it down to prevent further damage and fire. THe top cause of this include Horizontal output trasistor, flyback transformer and high voltage splitter. but There is about 25 different failures that can drive it into shut down. technicains have interface equipment that can read errors codes much like a car.
typical repairs on this set run 150 to 350... if you have to replace tubes...250 per tube +labor which runs 250 ... these set new cost 800 so unless under warrenty.. you got to determine if it is worth it.
Posted on May 12, 2008
3 blinks means the flyback needs replacing. very easy repair. You can get a flyback at the following link for under 50.00 with free shipping and free tech support so you can install it yourself. You need flyback 259296 here is the link.
Posted on Jun 28, 2008
SOURCE: RCA 52 in television
You will first have to see if cp150 is puffed up on top then go from there! Also you need to resolder all pinns on FBT poor connections on alot of these sets.HAPPY NEW YEAR!
Posted on Jan 01, 2009
could be power supply problem or high voltage problem. check caps in main power supply first.look for caps that have tops puffed up ususlly three or four.....
Posted on Feb 25, 2009
Tips for a great answer:
Dec 10, 2013 | RCA D52W20 52" Rear Projection HDTV-Ready...
Oct 28, 2013 | RCA P52926 52" Rear Projection Television
Sep 07, 2011 | RCA D52W19 52" Rear Projection Television
Jun 26, 2010 | RCA P52926 52" Rear Projection Television
Apr 29, 2010 | RCA HD52W58 52" TV
Apr 03, 2009 | Proscan PS52690 52" Rear Projection...
172 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: