Question about Kenmore 24032\24036 Top Load Washer

3 Answers

I have a Kenmore Ultra Fabric Care I Heavy Duty 80 Series, Model #110 92583110. It will fill with water, agitate and go through the wash cycle but won't drain or spin. What are the possible problems?

Posted by on

  • gospelstuff Nov 09, 2014

    Well its not going to drian without a spin, I would check for a loose belt, bad clutch or worn motor coupler. Im leaning towards the clutch

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Get a higher quality appliance

Posted on Aug 17, 2009

  • Christopher Hintz
    Christopher Hintz Aug 03, 2012

    you are **** for answering the question like this

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It's probably the lid switch, the washer will function with the lid up filling and agitating but not spinning. It drains also during the spin. Check youtube video link

Posted on Apr 29, 2014

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Could be the drive coupler.

Posted on Mar 14, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore ultra fabric care washer heavy duty 80 series with electronic temperature control and I can only get hot water not cold.


If it used to work and now does not, either the valve that controls the water inlet to the hot is bad or the temp sensor in the machine is bad. What is the whole model number?

Mar 22, 2015 | Kenmore Washing Machines

1 Answer

I have kenmore 80 series heavy duty/ super capacity plus washer that after it fills with water,hot or cold and it starts the wash cycle, I noticed that the agitator only moves once in awhile and stops


hum either a bad timer sticking the point contacts close. have u tried this in all cycles? and possibly a motor with bad windings not enough power to run agitation? try running in mild or gentle and see what happens? I was tempted to say the cam dogs in agitator but they dont work then stop then work, when they go out they go out.

Feb 17, 2015 | Kenmore Washing Machines

1 Answer

Is there a belt on a kenmore ultra fabric care heavy duty 80 series


No. What is the problem you are having? Let me guess, it's not spinning or agitating?!
What is the model number listed under the lid?

Nov 03, 2012 | Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore 80 series washing machine will fill up with water, then nothing happens


Kenmore Ultra Fabric Care Heavy Duty 80 Series washing machine (Model # 110.92389200; Serial # CF 1122814) went through the wash cycle completely, but rinse not the rinse cycle. Motor was going but washer not spinning. Also smelled something like burnt rubber. Could the belt have gone out? Is this something that I can fix myself?

Mar 18, 2010 | Washing Machines

1 Answer

I have a Kenmore/Ultra Fabric Care IV - Heavy


Sounds like the machine is stopping to me, could be the off balance switch at the rear off the machine. You should know if its getting to the spin cycle.How wet are your clothes ? Hope this Helps.

Sep 15, 2009 | Washing Machines

1 Answer

Direct drive-type Kenmore washer will not spin.


Check the video at the following link. I think you will find it helpful. Hope so and best wishes.

http://www.youtube.com/watch?v=WLPGs2UMUJc

Sep 14, 2009 | Washing Machines

1 Answer

Kenmore washing machine will not drain


Replace the timer.
This is a neutral drain machine. If there is no natural pause in the timer at the end of the rinse cycle the timer is bad.

Mar 13, 2009 | Kenmore Washing Machines

1 Answer

How do I take apart the outer shell to my Kenmore -Series 80 washing machine?


I have Serial # CF2467934 Model # 92588210 Kenmore Ultra Fabric Care Heavy Duty 80 Series. The top agitator is stripped out, how do I take it out to replace it?

Aug 11, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

913 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

fordexpert

Level 3 Expert

5495 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...