Diagram of bobbin casing for singer 1036 creative touch?

Customer Support ,,,,

I am not sure about this particular machine but in most machines there will be a nob on the front loose low numbers like 0 1 -2 work well on number 3. If the nob is not on the front check and see if it is on the side.

Please check the bobbin tension or you bought a new bobbin and case otherwise check the timings.

I can only think of one problem and that is that you have not fitted it properly. Open the bottom section, remove the bobbin case with the cotton reel and with your fingers press against the parts left behind. You may find something is loose, therefor not fitted correctly. You can also run the machine whilst the bobbin is out and listen if there is any noise or anything shaking. Refit everything taking care that the parts fit tightly.

Singer website has a plethora of manuals to download, http://www.singerco.com/accessories/instruction-manuals is the link, your manual is there for $15. If the bobbin thread is knotting up in the bobbin then I'd say you need to rewind a fresh bobbin and make sure it is smooth with even tension as it goes onto the bobbin. If your bobbin thread looks a bit chunky and uneven, then you won't get good results from it. Also, check that you are putting the bobbin into the bobbin case the right way, the thread needs to come off the bobbin and make a reverse direction into the tension spring (assuming yours is a removeable bobbin case, not top loading)

Here is a free threading and bobbin winding guide for the 1036 that seems to be very similar to the 1030 - http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Singer_Sewing_Machine_Threading/singer_1036_threading_diagram.htm

Could not locate a free manual.

Needle Faces Where?  
I Need to Tighten the Tension....  
Changing a Needle  
Need Help  
Basic Questions-  
Bobbin Assembly Popped Out!  
Do You Think My Machine is Fixable?  
How to Change a Broken Needle  
Needle Bar Adjustment  
Oiling an Elna 3007  
Getting the Timing Belt Off?  
What Size Needles for My Machine?  
How to Oil my Machine?  
Where to Oil??  
Stitch Length Knob Woes  
Can't Seem to Put the Bobbin in Correctly  
Timing Belt Tension  
Adjustments  
Running Very Slow-  
Oiling Points on Singer 257  
Oiling My Singer Touch & Sew  
Singer 457  
Featherweight Case Odor  
Brother XL2010 Q's  
Does My Machine Have More Than One Belt?  
Cannot Seem To Adjust the Tension  
What to Do About a Gumming Up Needle  
How Tighten My Bobbin Tension, Please  
Is it Covered Under Warranty?  
Proper Threading Instructions?  
Just a Foot Pedal?  
Simple Threading Instructions for a 1036  
Threading a Singer 600  
Replacing a Blade on a Johnson Ruffler  
Changing the Needle  
Lubricating a Singer 1036  
Thread Balling Underneath  
Warranty Info  
Machine Covered in Hardened Oil  
Spindle Stuck?  
Do Motors Die?  
Singer 457  
Brother Sewing Machine  
Servicing My Machine-  
Belt Replacement  
Lubricating My Sewing Machine  

check out this. good luck. thanks.

Needle Faces Where?  
I Need to Tighten the Tension....  
Changing a Needle  
Need Help  
Basic Questions-  
Bobbin Assembly Popped Out!  
Do You Think My Machine is Fixable?  
How to Change a Broken Needle  
Needle Bar Adjustment  
Oiling an Elna 3007  
Getting the Timing Belt Off?  
What Size Needles for My Machine?  
How to Oil my Machine?  
Where to Oil??  
Stitch Length Knob Woes  
Can't Seem to Put the Bobbin in Correctly  
Timing Belt Tension  
Adjustments  
Running Very Slow-  
Oiling Points on Singer 257  
Oiling My Singer Touch & Sew  
Singer 457  
Featherweight Case Odor  
Brother XL2010 Q's  
Does My Machine Have More Than One Belt?  
Cannot Seem To Adjust the Tension  
What to Do About a Gumming Up Needle  
How Tighten My Bobbin Tension, Please  
Is it Covered Under Warranty?  
Proper Threading Instructions?  
Just a Foot Pedal?  
Simple Threading Instructions for a 1036  
Threading a Singer 600  
Replacing a Blade on a Johnson Ruffler  
Changing the Needle  
Lubricating a Singer 1036  
Thread Balling Underneath  
Warranty Info  
Machine Covered in Hardened Oil  
Spindle Stuck?  
Do Motors Die?  
Singer 457  
Brother Sewing Machine  
Servicing My Machine-  
Belt Replacement  
Lubricating My Sewing Machine  

check out this  good luck  thanks.

Needle Faces Where?  
I Need to Tighten the Tension....  
Changing a Needle  
Need Help  
Basic Questions-  
Bobbin Assembly Popped Out!  
Do You Think My Machine is Fixable?  
How to Change a Broken Needle  
Needle Bar Adjustment  
Oiling an Elna 3007  
Getting the Timing Belt Off?  
What Size Needles for My Machine?  
How to Oil my Machine?  
Where to Oil??  
Stitch Length Knob Woes  
Can't Seem to Put the Bobbin in Correctly  
Timing Belt Tension  
Adjustments  
Running Very Slow-  
Oiling Points on Singer 257  
Oiling My Singer Touch & Sew  
Singer 457  
Featherweight Case Odor  
Brother XL2010 Q's  
Does My Machine Have More Than One Belt?  
Cannot Seem To Adjust the Tension  
What to Do About a Gumming Up Needle  
How Tighten My Bobbin Tension, Please  
Is it Covered Under Warranty?  
Proper Threading Instructions?  
Just a Foot Pedal?  
Simple Threading Instructions for a 1036  
Threading a Singer 600  
Replacing a Blade on a Johnson Ruffler  
Changing the Needle  
Lubricating a Singer 1036  
Thread Balling Underneath  
Warranty Info  
Machine Covered in Hardened Oil  
Spindle Stuck?  
Do Motors Die?  
Singer 457  
Brother Sewing Machine  
Servicing My Machine-  
Belt Replacement  
Lubricating My Sewing Machine  
check out this. good luck. thanks

I BOUGTH A USED SINGER MACHINE MODEL #1036, 'creative touch, the machine came with not assesoris or manual. did you can help me to find literature related with this products
thanks