I have the same exact X-Box problem as matjac rulez.
In the middle of play "connection lost" message pops in briefly, It freezes up then it resumes again. It's frustrating and is happening more frequently. My connection is to a Netgear router wireless. I've never have this happen in the last several years of playing x-box live. This only happens when I play COD4 or COD WaW.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is the worst and most frustrating purchase ever!!! Finally registered it and downloaded apps from scratch since i lost my preloaded apps from factory reset and everytime we want to play a game, parental control pops up every time, even in the middle of the game!! Ridiculous!
I have the exact same problem with the exact same stereo. I started by removing the in-line AM/FM/VHF Separator and connecting the antenna directly to the stereo. The static/popping/fade-out continued. Today I swapped to a new antenna, but it did not help. I swapped back to the original antenna and for a brief while, I had good reception. The I went to coil the excess antenna cable and the static/popping/fade-out resumed. I have narrowed it down to either the antenna connector coming out of the back of the stereo or an internal circuit. Either way, it does not look like a do-it-yourself fix.
This is generally an indication that the DVD end of the drive is going out. First try a different or updated DVD decoding software. It could just be a simple glitch with the software, or that the software is outdated.
1.Call from a touchtone phone. 2.During greeting message, enter your remote code. (Code is "11" by default, or you can set your own beforehand via Menu>Initial setting>Set answering>Remote code>enter your desired 2 digit number) 3. Unit will announce number of new messages, and play them back. 4.After 3 seconds, voice guidance will start; follow as necessary.
Bypass voice prompt by pressing: 1 Repeat message (during playback) 2 Skip message (during playback) 4 Play new messages 5 Play all messages 9 Stop (to resume, enter a command w/in 15 sec, or voice prompt resumes) 0 Turn answering system off *4 Erase this message (during playback) *5 Erase all messages If answering system is off, you can force it back on by calling and letting phone ring 15 times. Good luck. Hope this helps!