I m havin pentium dual core processor wid 2.79 ghz n intel original motherboard of 945G series.few days earlier it used 2 shut off sometime when processor is heavily loaded but nowadays it started shuttin down while the time of booting, it didn't get the OS(xp2) loaded. I tried the thermal paste but didn't worked out.Everythings seems gud the fan, processor.But not able to find out the problem. Plzzzz help me out.....
Run this program and see if your processor is really getting hot(or at least the system thinks so). You could have a bad processor, bad heat sink, motherboard, fan, etc. The first step though is to see what the system "thinks" is going on.
You might need to cool the machine down first to be sure that you can get to the point of being able to run the test. Watch the temp and see what happens. Hopefully it will give us some clues.
I'd download the program on another compute and put it on a memory stick so you'll be able to get it running ASAP when the system boots.
Is this a laptop or a desktop? Also, if a desktop, is it a namebrand or whitebox/clone?
If it's a desktop one thing you can try as a temporary fix/diagnosis aid is run the machine with the cover off and a powerful fan blowing directly on the processor.
I have a mcp61pm-am Rev:1.0A motherboard I beleive that it has stoped working is there a way to make...
(More)
I have a mcp61pm-am Rev:1.0A motherboard I beleive that it has stoped working is there a way to make sure of this
I have a computer manufactured from ibuypower in california.It is a Fatality Version, Viper Model. I...
(More)
I have a computer manufactured from ibuypower in california.It is a Fatality Version, Viper Model. I was attempting to install a new network card but some wires were in the way of installing the new network card. I tried to stretch them a little but the wires came unplugged. Now I don't know what wires go where.
I have an ASUS P5n-d nForce 7501 SLI chipset w Gb LAN, S-ATA Raid, USB 2.0, IEEE-1394, Dual PCI-EPU Technology motherboard. I need help in re-installing these wires to their connectors. I know I can't guess and if I get the wires in the wrong place, I could burn up the computer. Can you assist please? I have the pin numbers/letter description and the possible wire numbers/lettering and ready to submit this data.
Please help. I tried to call my manufacturer but they will be closed till Monday.
Sincerely,
Allen Williams
power supply stopped working I discovered that when the 4 pin wht plug on the MB is in the pc wont...
(More)
power supply stopped working I discovered that when the 4 pin wht plug on the MB is in the pc wont boot. but If I leave it unpluged I can get the power supply to work but the mother board wont boot. just the fan spins and the HDD gets power. I've narroed it down to the 12 volt plug that comes from the power supply and plugges into the MB. I tried a different powersupply same thing.