Question about Nokia Audio Players & Recorders

Open Question

How to booster speaker volume of talk in nokia asha 210

I am hearing deficient. when somebody talks to me his/her voice is low. If put a bluetooth headphone the voice is loud but garbled. what is the solution? I have already kept the speaker volume high.

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 40 Answers

SOURCE: why i cant talk in headphone i can hear the voice

Click on start->control panel->sounds and audio devices->audio tab->under sound recording click on volume tab and uncheck mute all and anyother mute.

Posted on Oct 03, 2009

Ad
  • 1 Answer

SOURCE: I own a Sony-Ericsson P1i. Its sound volume is

I had this problem too but i found this on the web so i'm gonna copy paste . Good luck!
"The low volume in the in calls in SE P1 / P1i can be easily solved in this way/hack:
(Thanks to montsma, the Junior Member AT noeman.org)

Speaker volume in P1i Service Menu

Go to the Main Menu > Phone > Phone to open the virtual numeric keyboard.

Do the following;

- 1 click up on jog dial and press (*)
- 2 clicks down on jog dial and press (*)
- 1 click down on jog dial and press (*)

to open the hidden Service Menus part of the phone.

Then go to the Service Tests > Speakers.

There are two selections, rear and front, and the "front" adjusts the volume of the ear speaker, which is used during the calls. Increase the volume to %100. Quit the Service Menus and make your call. I made one try and it was cool!"

Posted on Nov 20, 2010

  • 51 Answers

SOURCE: I've been told my voice is too loud when

There is no way to lower your outgoing volume, just try speaking a bit more quiet when using the phone.

Posted on May 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

No Sound or Garbled Sound on a Nuvi Series GPS


I've seen many posts of "No Sound" or "Garbled Sound" for the Garmin Nuvi Series. This is a common problem with the Nuvi.

In order to troubleshoot this problem, we need to determine if it's a hardware or software issue or a setting issue.

No Sound:

1. Try the obvious. Is your volume setting turned up?

2. Is the sound muted with the mute button?

3. If your Nuvi has a FM transmitter, is it selected to "FM" or "Speaker"? The "FM" setting will mute the internal speaker. Setting it to "Speaker" will send sound to the speaker.

Garbled Sound:

1. Does the sound seem to be better at lower volume settings?

If you still can't hear audio or if the sound is garbled, then we now have to determine if the internal speaker is defective. The easiest way to do this is:

1. Plug a set of headphones into the headphone jack. Now try listening to the sound. Listen for the touchscreen beeps, MP3 audio, voice directions, etc. Try adjusting the volume using the headphones. If you can hear sound through the headphones and it's clear and not garbled, then your internal speaker is defective.

The headphone jack is not only a jack but it's also a switch. When you plug in your headphones, the audio amplifier of your Nuvi is switched from the internal speaker to the headphone jack. When you unplug the headphones, your Nuvi's audio amplifier is reconnected to the internal speaker.

Now, if you can't hear audio through either the internal speaker or the headphone jack, you may have a different problem.

1. The internal audio amplifier (hardware) is defective.
2. There is a software problem. You could try resetting your Nuvi with the reset button or perform a factory reset. The software problem is more likely if you can hear MP3 audio or touch screen beeps but not speech.

The internal speaker has a voice coil. The voice coil is nothing more than a thin piece of long wire, wrapped around a magnet, numerous times. If you can't hear any sound, it is very likely that this coil is "open"; meaning that the wire has broken inside. If the sound is garbled, this is an indication that the speaker is mechanically defective and not reproducing the sound as it should. The speaker has a "diaphram" that moves in and out as it reproduces sound. If the diaphram has been damaged, it can't move in or out like it should and reproduce the sound clearly. There is also a possiblity that the voice coil has shorted windings, meaning that instead of it being a long piece of wire, it's now shorted to its adjacent windings and is electrically shorter now. Again, this can impact the reproduction of sound.

So, why did your speaker go bad?

1. It's possible it was defect in the manufacturing process and failed prematurely.
2. You might have had the volume up too high. I recommend using the lowest volume level possible. High volume levels put greater stress on the diaphram and may overheat the voice coil.
3. A speaker is an electro-mechanical device. It's subject to being damaged if you happen to drop or jar your Nuvi and/or operate it outside of its normal operating parameters.

What's the Next Step?

If your Nuvi is under warranty, I strongly suggest that you contact the manufacturer and tell them what happened. Tell them all of the steps you have gone through to confirm that the speaker is defective. If the warranty is still in effect, they should repair or replace your Nuvi.

If your Nuvi is out of warranty, try calling the manufacturer anyway. You have nothing to lose. Maybe they will replace it anyway.

If you have no sucess with the manufacturer, you will need to take your Nuvi to someone who is qualified in repairing your Nuvi.

I hope this tip has been helpful to you. Feel free to contact me if you have further questions or require further assistance with this problem.

Best wishes,
- Jim
http://www.sharcnet-usa.com

on Oct 01, 2008 | Garmin Nuvi 350 Car GPS Receiver

Tip

No Sound or Garbled Sound on a Garmin Nuvi GPS


I've seen many posts of "No Sound" or "Garbled Sound" for the Garmin Nuvi Series. This is a common problem with the Nuvi.

In order to troubleshoot this problem, we need to determine if it's a hardware or software issue or a setting issue.

No Sound:

1. Try the obvious. Is your volume setting turned up?

2. Is the sound muted with the mute button?

3. If your Nuvi has a FM transmitter, is it selected to "FM" or "Speaker"? The "FM" setting will mute the internal speaker. Setting it to "Speaker" will send sound to the speaker.

Garbled Sound:

1. Does the sound seem to be better at lower volume settings?

If you still can't hear audio or if the sound is garbled, then we now have to determine if the internal speaker is defective. The easiest way to do this is:

1. Plug a set of headphones into the headphone jack. Now try listening to the sound. Listen for the touchscreen beeps, MP3 audio, voice directions, etc. Try adjusting the volume using the headphones. If you can hear sound through the headphones and it's clear and not garbled, then your internal speaker is defective.

The headphone jack is not only a jack but it's also a switch. When you plug in your headphones, the audio amplifier of your Nuvi is switched from the internal speaker to the headphone jack. When you unplug the headphones, your Nuvi's audio amplifier is reconnected to the internal speaker.

Now, if you can't hear audio through either the internal speaker or the headphone jack, you may have a different problem.

1. The internal audio amplifier (hardware) is defective.
2. There is a software problem. You could try resetting your Nuvi with the reset button or perform a factory reset. The software problem is more likely if you can hear MP3 audio or touch screen beeps but not speech.

The internal speaker has a voice coil. The voice coil is nothing more than a thin piece of long wire, wrapped around a magnet, numerous times. If you can't hear any sound, it is very likely that this coil is "open"; meaning that the wire has broken inside. If the sound is garbled, this is an indication that the speaker is mechanically defective and not reproducing the sound as it should. The speaker has a "diaphram" that moves in and out as it reproduces sound. If the diaphram has been damaged, it can't move in or out like it should and reproduce the sound clearly. There is also a possiblity that the voice coil has shorted windings, meaning that instead of it being a long piece of wire, it's now shorted to its adjacent windings and is electrically shorter now. Again, this can impact the reproduction of sound.

So, why did your speaker go bad?

1. It's possible it was defect in the manufacturing process and failed prematurely.
2. You might have had the volume up too high. I recommend using the lowest volume level possible. High volume levels put greater stress on the diaphram and may overheat the voice coil.
3. A speaker is an electro-mechanical device. It's subject to being damaged if you happen to drop or jar your Nuvi and/or operate it outside of its normal operating parameters.

What's the Next Step?

If your Nuvi is under warranty, I strongly suggest that you contact the manufacturer and tell them what happened. Tell them all of the steps you have gone through to confirm that the speaker is defective. If the warranty is still in effect, they should repair or replace your Nuvi.

If your Nuvi is out of warranty, try calling the manufacturer anyway. You have nothing to lose. Maybe they will replace it anyway.

If you have no sucess with the manufacturer, you will need to take your Nuvi to someone who is qualified in repairing your Nuvi.

I hope this tip has been helpful to you. Feel free to contact me if you have further questions or require further assistance with this problem.

Best wishes,
- Jim
http://www.sharcnet-usa.com

on Sep 30, 2008 | Garmin Nuvi 660 GPS Receiver

2 Answers

Callers can barely hear me because my voice is muffled


I would advise to throw those out and if u have a xbox or xbox headphones use those

Dec 23, 2013 | AUVIO Bluetooth Headphones

Tip

No Sound Issue on the Garmin Nuvi Series


I've seen many posts of "No Sound" or "Garbled Sound" for the Garmin Nuvi Series. This is a common problem with the Nuvi.

In order to troubleshoot this problem, we need to determine if it's a hardware or software issue or a setting issue.

No Sound:

1. Try the obvious. Is your volume setting turned up?

2. Is the sound muted with the mute button?

3. If your Nuvi has a FM transmitter, is it selected to "FM" or "Speaker"? The "FM" setting will mute the internal speaker. Setting it to "Speaker" will send sound to the speaker.

Garbled Sound:

1. Does the sound seem to be better at lower volume settings?

If you still can't hear audio or if the sound is garbled, then we now have to determine if the internal speaker is defective. The easiest way to do this is:

1. Plug a set of headphones into the headphone jack. Now try listening to the sound. Listen for the touchscreen beeps, MP3 audio, voice directions, etc. Try adjusting the volume using the headphones. If you can hear sound through the headphones and it's clear and not garbled, then your internal speaker is defective.

The headphone jack is not only a jack but it's also a switch. When you plug in your headphones, the audio amplifier of your Nuvi is switched from the internal speaker to the headphone jack. When you unplug the headphones, your Nuvi's audio amplifier is reconnected to the internal speaker.

Now, if you can't hear audio through either the internal speaker or the headphone jack, you may have a different problem.

1. The internal audio amplifier (hardware) is defective.
2. There is a software problem. You could try resetting your Nuvi with the reset button or perform a factory reset. The software problem is more likely if you can hear MP3 audio or touch screen beeps but not speech.

The internal speaker has a voice coil. The voice coil is nothing more than a thin piece of long wire, wrapped around a magnet, numerous times. If you can't hear any sound, it is very likely that this coil is "open"; meaning that the wire has broken inside. If the sound is garbled, this is an indication that the speaker is mechanically defective and not reproducing the sound as it should. The speaker has a "diaphram" that moves in and out as it reproduces sound. If the diaphram has been damaged, it can't move in or out like it should and reproduce the sound clearly. There is also a possiblity that the voice coil has shorted windings, meaning that instead of it being a long piece of wire, it's now shorted to its adjacent windings and is electrically shorter now. Again, this can impact the reproduction of sound.

So, why did your speaker go bad?

1. It's possible it was defect in the manufacturing process and failed prematurely.
2. You might have had the volume up too high. I recommend using the lowest volume level possible. High volume levels put greater stress on the diaphram and may overheat the voice coil.
3. A speaker is an electro-mechanical device. It's subject to being damaged if you happen to drop or jar your Nuvi and/or operate it outside of its normal operating parameters.

What's the Next Step?

If your Nuvi is under warranty, I strongly suggest that you contact the manufacturer and tell them what happened. Tell them all of the steps you have gone through to confirm that the speaker is defective. If the warranty is still in effect, they should repair or replace your Nuvi.

If your Nuvi is out of warranty, try calling the manufacturer anyway. You have nothing to lose. Maybe they will replace it anyway.

If you have no sucess with the manufacturer, you will need to take your Nuvi to someone who is qualified in repairing your Nuvi.

I hope this tip has been helpful to you. Feel free to contact me if you have further questions or require further assistance with this problem.

Best wishes,
- Jim

on Sep 30, 2008 | Garmin nuvi 350 GPS Receiver

1 Answer

Can't hear myself talk


Dan, You should be able to hear yourself inside your head as the small hairs that vibrate in fluid in your ear canal will pick up your vocalizations. In any case you know what you're saying and it shouldn't be a problem talking to someone.
Now if you're listening to music really loud on those headphones and still need to hear yourself think, I suggest you turn down the volume. :)

Jul 16, 2013 | Creative ChatMax HS-720 Headset

1 Answer

Nokia asha 200 very low earpice sound speaker replaced but same problem


I have a problem with a nokia asha 200 phone that is very low sound for calling to any voice call ,then i am changed speaker but same problem present low sound

Nov 14, 2012 | Nokia Cell Phones

1 Answer

Gtalk audio call - my hear voice is getting my voice again


The person you are talking with needs to put on headphones or turn their volume way down.

Jul 13, 2011 | Google Talk

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5487 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75591 Answers

Are you a Nokia Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...