Question about Washing Machines

Open Question

Where can I get a full parts list for my ken more elite 592-495070 so that I can figure out what part I need for my pump that's not getting proper power when washer is full

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jsrock516
  • 5911 Answers

SOURCE: Need part number for rubber boot on my kenmore elite HE3t washer

The part number is 8182119 and can be viewed at searspartsdirect.com. Just type in your model number and look for item number 5 under the "Door and Latch Parts" heading. In addition, you may not need them, but just in case, you may consider the inner and outer bellow clamps that hold the door seal in place. This are items 6 and 14 under the same heading. Sometimes they become damaged. If you need instructions on how to replace the door bellow, the following link explains:

http://www.fixya.com/support/r385210-replacing_door_bellow_kenmore_elite

If you have any questions along the way, please let me know. I hope this helps you.

NOTE: You can find this part a little cheaper at appliancepartspros.com. Just use the "Search By Part Number" selection as your search criteria.

To keep the new bellow from mildewing, it is recommended by the manufacturer that you leave the washer door open while not in use and to periodically clean the bellow. Pull back the rubber folds in the door and make sure you do not have anything stuck that will cause odors and mildew. Small garments such as socks and underwear can commonly get stuck in this area of the door. Also, if you do not routinely use hot water, it is recommended that you run a "clean" cycle with a small amount of bleach about once a month to kill any bacteria.

Posted on Jul 01, 2009

Ad
  • 125 Answers

SOURCE: need new pump - can't find the part number

the pump should be easy to get from your appliance store if you bring the model number with you . Its a pretty common fault and repair part

Posted on Aug 23, 2009

cmccune04
  • 213 Answers

SOURCE: need parts list for ELITE B40 KEURIG coffee maker

Should be listed in your manual. If you need parts check this out.

This is actually an ebay store. They have any Keurig part you could possibly need! It's the only steady keurig part business operating right now. Prices are fair products are in great condition. Seller has 100% positive feedback with 100's of satisfied customers who voiced their opinions of them.

They have parts for Keurig B30 mini, B40 Elite, B60 Special Edition, B70 Platinum, and B77

http://www.igotsweetdeals.com or

http://stores.ebay.com/Igotsweetdeals

Posted on Apr 14, 2010

richroth
  • 9472 Answers

SOURCE: kenmore elite washer has power but will not start cycle

What is the model number of your unit?

Posted on Nov 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore elite he3 smart heat quiet pak4 how much is a motor for this dryer


  1. Kenmore Elite He3 Parts - searspartsdirect.com‎

    Adwww.searspartsdirect.com/Kenmore-Parts‎rating for searspartsdirect.com
    Shop Today at Sears PartsDirect™. The Largest Appliance Parts Seller.
    Ratings:Shipping 9/10 - Website 9/10 - Selection 9/10 - Quality 9/10
Search Results

    MOTOR diagram for model # 41794130000 Kenmore-elite ...

    www.searspartsdirect.com/model-part/41794130000/0583/.../00004.html
    MOTOR Diagram and Parts List for KENMORE ELITE Dryer-Parts model # ... MOTORdiagram for model # 41794130000 Kenmore-elite-Parts Dryer-Parts (18).

    PUMP AND MOTOR PARTS Diagram & Parts List for Model ...

    www.searspartsdirect.com/model-part/11047789702/0583/.../00006.html
    PUMP AND MOTOR PARTS Diagram and Parts List for KENMORE ELITE ... ANDMOTOR PARTS diagram for model # 11047789702 Kenmore-elite-Parts ...

Nov 01, 2015 | Kenmore Dryers

1 Answer

Ken more dryer elite he5 need to no where heating element is located


Use the following site all the time for help. Ordered parts from it also at a reasonable price compared to other sites that offer cheaper parts. Where they get ya on most of them is the shipping costs.
www.repairclinic.com

Jun 10, 2014 | Dryers

1 Answer

Parts list how can I get a parts list?


For the FurReal pony full size? It would do you no good; Hasbro does not make them, has ZERO inventory of ANY parts, and most of the time, you need to be innovative and/or creative. What parts do you need?

Apr 13, 2014 | Hasbro Furreal Friends Butterscotch Pony

1 Answer

Error code f 02


I think it's a slow drain fault. But would need full model number to say for sure. Still it wouldn't hurt to check the drain pump for crud. Here are some vids that might help. Don't worry too much about brand specifics. Many brands share identical and similar parts.

http://www.youtube.com/results?search_query=kenmore+elite+front+load+washer+drain+pump+cleaning&oq=Kenmore+Elite+Front+Load+Washer+drain+pump+clean&gs_l=youtube.1.0.33i21l2.425000.427123.0.432800.6.6.0.0.0.0.410.1517.2-5j0j1.6.0...0.0...1ac.1.lQhVllMwg9M

Jan 27, 2013 | Kenmore Elite 45986 Front Load Washer

1 Answer

My machine is a kenmore elite oasis mod 27042603 I need a pump for the washer. It makes a grinding noise when it starts to drain. I took it apart and did not see anything in it that might be obstructing...


You can order parts from any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

Make sure you use a complete MODEL NUMBER to ensure you find the correct parts listing. The first three sites listed also include exploded view parts illustrations to assist you with locating and properly identifying any parts you may need. The Oasis has two pumps. One is a drain pump and one is a recirc pump. The pump you are referring to, I believe, is the drain pump. Prices vary between sites, so shop and compare.

If you do not find your model number listed at all the sites I have provided, use the part number from the Sears site for your search criteria. In some cases, the model number may not be listed, but the part numbers will.

If you need guidance on how to replace the pump, the following link explains how:

http://www.fixya.com/support/r4155097-checking_drain_pump_whirlpool_cabrio

The Cabrio is the Whirlpool version of your washer. Both models are manufactured by Whirlpool and the washers are configured the same, so these instructions should apply. If you have any questions, please post back and let me know. I hope you find this information helpful.

Dec 23, 2010 | Kenmore Oasis 27042 Top Load Washer

1 Answer

Kenmore elite oasis top loader 27062


See the following Whirlpool / Kenmore service manual for the Whirlpool Cabrio washer. The Kenmore Oasis is basically the same.



https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf


Also see the Sears Parts site for your washer.

Enter the full (###.########) model number and you should see descriptions of the major components and parts lists.


May 04, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My ken,ore 80 series washer agitates ok and seems


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.


Two things to check.

It sounds as if the tub isn't getting full power from the transmission for spinning and/or the pump/hoses are damaged or blocked.

1. Remove the cabinet.

See the following.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=134&osCsid=7777818c689b6ece38ca9884721fffc7

and check the hoses / pump.

2. If they are OK, the problem may point to the Motor Coupler. See the following for how to check it.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=135

3. If the pump and Motor Coupler are OK, the problem could point to the clutch.

See the following for how to pull the pump, motor and transmission.

You don't have to remove the tub!!

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=137

If the clutch bands are worn, you don't have to replace the entire clutch. Sears / Whirlpool have a band replacement kit, a lot less expensive and easier to install than a new clutch.


Jan 17, 2010 | Kenmore Washing Machines

1 Answer

Kenmore elite washer


It appears your pump has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 05, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Need parts list for ELITE B40 KEURIG coffee maker


Should be listed in your manual. If you need parts check this out.

This is actually an ebay store. They have any Keurig part you could possibly need! It's the only steady keurig part business operating right now. Prices are fair products are in great condition. Seller has 100% positive feedback with 100's of satisfied customers who voiced their opinions of them.

They have parts for Keurig B30 mini, B40 Elite, B60 Special Edition, B70 Platinum, and B77

http://www.igotsweetdeals.com or

http://stores.ebay.com/Igotsweetdeals

Feb 25, 2009 | Keurig Elite B40 Coffee Maker

2 Answers

Er dh ken bot.fridge. 795.77552600


one thing to try first is make sure there is enough air flow in the freezer and that the airway between the freezer and refrigerator's is free and clear

Mar 19, 2008 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Brad Brown

Level 3 Expert

16636 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...