Televison & Video Logo

Related Topics:

P
Patricia A Wadycki Posted on May 19, 2017

Tv is stuck in remote, can only turn it off my sleep mode, used a new universal no luck, button on tv is also not working

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Feb 04, 2008

SOURCE: dwt 1905 tv stuck in game mode

I have a "One for All" brand universal remote, and it has a "TV/VID" button near the left bottom corner that controls the game mode. Had the same problem, and just figured that out.

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 01, 2008

SOURCE: sanyo stuck on video mode

Yippie, I figured out a solution that worked!!! I have a univeral remote from comcast, on that remote near the bottom left is a small button that says (input) tv/vcr, press that one time and whala!! the tv video screen was gone, I had to manually change the channel from the tv channel button on the unit. once I changed the channel to 3, my universal remote worked... the button is the second one from the bottom left... I was on hold with sanyo for a long time and just kept trying on my own, so good luck!!!!

Anonymous

  • 1 Answer
  • Posted on Nov 19, 2008

SOURCE: emerson tv stuck in video mode

Done - channel scan put the TV back in the correct mode

Anonymous

  • 744 Answers
  • Posted on Feb 12, 2009

SOURCE: Dmtech TV is stuck in stanby mode

The problem IS PROBABLY BEING CAUSED BY A SHORTED POWER REGULATOR (MX084 ) OR AN OPEN FUSEABLE RESISTOR IN THE POPWER SUPPLY... 

thank u rate me!!

Anonymous

  • 1 Answer
  • Posted on Nov 03, 2009

SOURCE: TV stuck on Video

I had this problem, I replaced the remote and it works now

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Is there a reset button on a onn tv model onc17tv001 because it is stuck on photo mode and I have lost the remote?

Just get a universal remote. Set it to your onn tv with onn codes or rca codes. Worked quick. Less than 5 minutes spent and it's fixed.

f781ab9e-ccdb-4dbf-a8db-9c8704148d4d.jpg


img_20230831_121029-ht3v0zdjaeevy2k1va2ew23i-d-2.jpg
0helpful
1answer

My Bruhm 32 curve tv is stuck in usb mode, and i dont have remote

If your Bruhm 32-inch curved TV is stuck in USB mode and you don't have a remote, there are a few different things you can try:
  1. Try using the buttons on the TV itself: Some TVs have buttons on the side or bottom of the screen that can be used to navigate menus and settings. Look for buttons labeled "menu," "input," or "source" and see if you can use them to switch to a different input or exit USB mode.
  2. Unplug the TV: Unplug the TV from the wall outlet for a few minutes, then plug it back in and turn it on. This can sometimes reset the TV and clear any issues with the USB mode.
  3. Obtain a replacement remote: If you don't have a remote, you may need to purchase a replacement. Check with the manufacturer or a retailer that sells Bruhm TVs to find a compatible remote.
  4. Use a universal remote: If you have a universal remote, you may be able to program it to work with your Bruhm TV. Consult the manual for your universal remote or contact the manufacturer for assistance in programming the remote.
If none of these steps work, you may need to contact Bruhm customer support for further assistance.
0helpful
1answer

Sanyo TV 27 inch stuck on Video mode. It reached this mode by me pressing the input button on my (GE) Universal remote, not knowing it would put it in Video mode and then accidentally pressing enter to...

Universal remote alway work only the basic for the tv.Beyond that will have problems or stuck in some input or modes.Sorry i can't help u, because i don't know what is the reaction to ur tv by the universal remote,must use the universal remote again tries all the buttons like video modes or input botton.Or take the battery out like 20 mins of the universal remote to erase ur tv codes enter it again.Tries those buttons u pushes before,see if u can get out the video mode.All else fail.Try website like Remotes.com to buy the tv original remote to use.
2helpful
2answers

TV will not come on with remote or power button

The following instructions are for the Emerson EWC1303/1903 tv/vcr. That's the closest match I could find to the Spongebob Squarepants 13' TV
If it's actually in Sleep mode, do the following:

TO CANCEL THE SLEEP TIMER
Press the WAKE UP/SLEEP button on the remote
control until “SLEEP TIMER” appears.
To view the time left for sleep timer press the WAKE
UP/SLEEP button twice, then press the MENU button
on the remote control to exit the sleep timer setting


If unsuccessful, try unplugging the TV for 1/2 hour, then plug it in and try turning it back on either manually or with the remote. Either of these should solve your problem. Best of luck to you!
31helpful
4answers

Deep Sleep

use the TV VIZEO remote to get out of RGB mode and go to hdmi2 and for me that ALWAYS works.  or whatever mode your cable is set to.  good luck
0helpful
6answers

Need information on a philips t.v. model 32PT6441/37

Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

clip_image001.jpg
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT
0helpful
3answers
39helpful
13answers

Sanyo stuck on video mode

Yippie, I figured out a solution that worked!!! I have a univeral remote from comcast, on that remote near the bottom left is a small button that says (input) tv/vcr, press that one time and whala!! the tv video screen was gone, I had to manually change the channel from the tv channel button on the unit. once I changed the channel to 3, my universal remote worked... the button is the second one from the bottom left... I was on hold with sanyo for a long time and just kept trying on my own, so good luck!!!!
0helpful
1answer

AUX mode

Try to disconnect power for at least one day.

good luck---------tomtaso
Not finding what you are looking for?

36 views

Ask a Question

Usually answered in minutes!

Top Universal Televison & Video Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

153 Answers

Are you an Universal Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...