Question about Ford Garden

Open Question

I have a ford 1910 tractor and 1 wire from the cold starter aid is disconected I dont no where is going...Thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 218 Answers

SOURCE: 1950 8N FORD TRACTOR WON"T START.

Hi..my name is Keith..and i have 9 ford tractors..i have 9N's..2N's and 8N's..and i have converted one or two of them over to 12V..and i use the solonid that has only 1 side post...and thats what my original starter swich connects to and on the big terminal i have the battery wire and a 12 gauge wire that i run to the amp meter....i hope this helps..and if you have any questions..please write back

Posted on Jun 30, 2009

  • 8404 Answers

SOURCE: my 1949 8N Ford tractor, the starter just spins

My thought is you need a new "bendix" for lack of a better word. The device I speak of spins out and connects with the flywheel. There is the possibility you have electric problems but based on what you say, I think it is mechanical.

Thanks for posting your question at FixYa.com

Pleae vote

thank you

a

Posted on Nov 09, 2009

  • 202 Answers

SOURCE: Diagrams_For ford 2N tractor starter

If you have not already found the info, I would suggest visiting the following website for some detailed help:

mytractorforum.com

No cost but will have to join to post questions. Likely all info can be had simply by searching the Ford "N" section. Good Luck!!

Posted on Nov 27, 2011

hunter19_46m
  • 7482 Answers

SOURCE: lost my tractor key ford 1910

Hi skybird564
You can try at the Ford tractor dealer to see if they have a generic key for your ignition..if not then replace the switch with a new starter switch you can purchase at any auto parts store.
Please take time to rate me
Bud

Posted on Mar 23, 2013

  • 1832 Answers

SOURCE: where do I install the frost plug block hearter on a ford 1910 tractor

-Read its manual.


mai

Posted on Dec 31, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i find a starter wiring diagram for ford 4630 tractor


Try this web link: http://www.maidaozhi.com/ford/ford-4630-tractor-wiring-diagram
http://www.maidaozhi.com/ford/ford-4630-tractor-wiring-diagram

Oct 18, 2016 | Ford Garden

1 Answer

Pto grinds when engaging ford 1910


It need a like adjusing b6e7ec20-9d22-4b69-a2fa-2d59e05386d1.jpg

Feb 02, 2014 | Garden

1 Answer

Lost my tractor key ford 1910


Hi skybird564
You can try at the Ford tractor dealer to see if they have a generic key for your ignition..if not then replace the switch with a new starter switch you can purchase at any auto parts store.
Please take time to rate me
Bud

Mar 22, 2013 | Garden

1 Answer

How to change a starter on a 1520


first disconect battery! very important to do this first. then disconect the black wire remember whitch side of the starter it was on or mark it down the diconect the red wire and any additional wires. there are two long bolts that hold on the starter. remove and replace. just reverse everthing.

Nov 21, 2010 | John Deere Tractor 1020, 1520, 1530,...

1 Answer

How do I remove the starter on a Ford 8N tractor?


Funny you should ask. I just got in from doing just that.

1: Disconnect the battery
2: remove the seloniod (I just unbolted and unscrewed it from the starter and left the wires on it so I wasn't trying to guess what went where later when I get back to reassembling it.)
3: you have 2 bolts at the rear of the starter (the part of the starter that faces the front of the tractor.) You unscrew them to take the starter out. BE CAREFUL - if you pull the starter apart it will be a bear to get the brushes back in.

I had the additional problem of the "bendix" (the part that engages the flywheel) jumping over the flywheel so I needed to remove the bolts on the canister to the left of the starter and move it slightly out of place in order to complete the project. You may not have to do that but I mention it as a aid because I don't know why you're changing out starters.

In my case I found that although the starter was spinning the shaft was being chewed up because the engager (bendex - whatever its called) had jumped the flywheel and was resting against the flywheel. Really needed extra space to pull the starter because of that.

Also saw somewhere that that bendix needs to be drawn in in order to reinsert the starter (something about having to spin it in??? I'll be looking for that shortly myself.

Jan 13, 2010 | Ford 8n,9n,2n, Tractor Starter With Drive

1 Answer

I think the solinoid is bad ,it wont engage into


it's 1 of those jobs that you probably want a mechanic to do unless you can see your starter
f it hangs off the back of the motor then have a mechanic change it as the exhaust is probaby right over top of it abd it has to go downwards and can only be accessed from the botom
if it is on the front of your motor then disconect the baterie and look for 2-3 nolts then hold the starter to the motor or trany
after you remove te\he bolts remove the wires dont be afraid to make a diagram of the wires
heck use masking takpe and tie the wires that go together together and mark them usualy ther are 2 terminals 1 for main power and 1 for the starter circut and the starter circut is usualt red and a lighter guage wire

Aug 03, 2009 | 1993 Buick Skylark

3 Answers

I have a 1999 ford 350 econoline with a dead engine. I don't think it is the battery. How hard is it to change the starter myself?


Its pretty simple get a jack and jackstand to support the van locate the starter take out the two or three bolts drop the starter remove the cables and wires make sure you mark your wires so you know how to put them back on bolt the starter back on and your done. Good luck

Jul 10, 2009 | Ford E-350 Cars & Trucks

2 Answers

1950 8N FORD TRACTOR WON"T START.


Hi..my name is Keith..and i have 9 ford tractors..i have 9N's..2N's and 8N's..and i have converted one or two of them over to 12V..and i use the solonid that has only 1 side post...and thats what my original starter swich connects to and on the big terminal i have the battery wire and a 12 gauge wire that i run to the amp meter....i hope this helps..and if you have any questions..please write back

Apr 13, 2009 | Ford Tractor 8n Front Emblem

Not finding what you are looking for?
Garden Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

fordexpert

Level 3 Expert

5467 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you a Ford Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...