Question about Sewing Machines
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Shark Euro-Pro Sewing Machine
I had the same problem with my Shark Euro Pro 7133. My problem was in threading the upper thread. The manual does not quite explain so I had to figure this out the hard way.
In threading the upper thread . the thread first goes down from the spool througt a groove. When it comes up it must catch a silver lever that moves up and down before moving it down againPlease let me know whether this helps.
Posted on Jul 26, 2008
If you want it free, try here first. You'll need a specific # off the back of the machine, they tell you where to find it.
If they don't have it online, you'll have to pay for one.
Posted on Mar 30, 2009
I hope this helps. It took some searching but this is what i found. Good luck!
Posted on Jan 22, 2010
There is no solution for that problem. My machine was doing the same thing, I returned it for "repair". Got it back 2 wks later and had the same problem. Just the other day, the machine did that, and then something "popped" and now the upper thread won't catch the bobbin thread. I called Customer Service and was told that if I want my machine repaired, I have to send them a check with the machine for $81! Your best bet...get rid of the Intelli-Sew and buy something that doesn't break every month or so!
Posted on Mar 19, 2010
Tips for a great answer:
Feb 20, 2015 | Euro-Pro Shark 60-Stitch Sewing Machine -...
Nov 21, 2014 | Euro-Pro Shark Sewing Machine
Jan 16, 2011 | Euro-Pro Shark 60 - 384
Mar 06, 2010 | Euro-Pro Shark 60 - 384
May 04, 2009 | Euro-Pro Shark 60 - 384
Aug 28, 2008 | Sewing Machines
22 people viewed this question
Usually answered in minutes!