Question about Boss Car Audio & Video
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If an audio unit with theft protection is disconnected from electrical power, you must enter a unique code number into the unit or it will not work. This code and the audio unit’s serial number are listed on the anti-theft ID card that comes with the vehicle. If this card is lost, you must obtain the audio unit serial number in order to get the radio code (some people say that they have found the code on a sticker inside the glove compartment, but I wouldn’t count on that). Some newer vehicles allow you to retrieve the audio unit serial number electronically from the radio. Refer to your owner’s manual for the specific procedure (the following usually will work: Turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release.)
Once you have the audio unit serial number, you can call Auto Customer Service at (800) 999-1009 or have the dealer look up the radio code.
Hope this helps you understand the process.
Posted on Nov 22, 2009
SOURCE: where is the reset button
Click on the link below to view the BOSS audio BV9560b user manual, inside the manual it will show you where the reset button is located:
Posted on Feb 04, 2011
SOURCE: when i insert a dvd
if you trying to view the dvd while driving you have to bypass the secruity feature. all you have to do is connect the wire that goes to the Emergency Break to the Ground Wire On The DVD player. I Have This Player And Have Done This.
Posted on Jan 30, 2012
If you entered the incorrect code several times you may have ruined your chances of getting radio to work. On vehicles with anti theft radio when the battery is disconnected or the vehicle looses power the radio licks and to enable it a code is needed. The dealer may be able to help you but they would need certain information. Sometimes the vin of the car or some times the radio has to be removed to get the serial number. But if the wrong code is entered after so many attempts the radio becomes completely disable. To the point where you will not be prompted to enter a code.
Posted on Jun 27, 2012
Because when the unit was built, where ever that might be in the world the clock an other systems were set for their area. A disk was run through telling the processor certain things to do an a technician adjusted what ever needed correcting. So a reset of the timing an processing chips are needed.
Posted on Jan 28, 2015
Tips for a great answer:
May 10, 2015 | BOSS AUDIO SYSTEMS Car Audio & Video
Sep 04, 2014 | BOSS AUDIO SYSTEMS Car Audio & Video
Dec 23, 2012 | BOSS AUDIO SYSTEMS BV9970 Car Video Player
Mar 05, 2012 | Boss Car Audio & Video
Feb 24, 2012 | Boss AUDIO SYSTEMS BV9055 Car DVD Player
Jun 10, 2011 | Boss DVD-2000 Car DVD Player
Nov 22, 2009 | 2004 Honda Odyssey
Aug 07, 2009 | Pioneer DEQ-7600 15-Band Car Equalizer
Jun 26, 2008 | 2002 Acura MDX
May 20, 2008 | Boss DVD-7500 Car DVD Player
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: