Question about Maytag Dishwashers

1 Answer

I have the Maytag dishwasher model #MDB8949SBB3 and it comes on every day at about the same time. I cannot figure out what to do to get it to stop. Is there any solution to this problem?

Posted by on

  • Whirlpool
    Whirlpool Jun 16, 2017

    Hi Debbie, we're sorry to learn of your concerns with your Dishwasher. Please click on the link below for possible troubleshooting solutions. If you still need assistance, please provide your name, the name of the site you were contacted on (fixya.com), your user ID name (Debbie Boesch), your phone number, your address, the full model and serial number, and email the requested information to Maytag_Digital@Maytag.com. We would be happy to review your concerns further.
    http://bit.ly/2sjnjZm

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Maytag Master
  • 36,376 Answers

You may have it set for timer operation.

Posted on May 18, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My maytag dishwasher model MDB7749SAM stopped working about three days ago. The start/resume button flashes continuously and won't turn off. I flipped the breaker switch but nothing reset. The cancel...


Most likely moisture has affected the switches in the panel or the controller is faulty.

Refer assembly shown in the link below. Open the panel and locate the ribbon cable. Carefully take it out and with a hair dryer lightly dry up the parts. Put everything back and turn power back on. If no difference still then you may have to replace the control board.

MAYTAG Undercounter Dishwasher Control panel and latch Parts Model...

Aug 01, 2014 | Dishwashers

1 Answer

Maytag Model # DWU7202AAB


Do you live in a region with hard water? Here is a map to help you figure it out.
http://www.citriclean.net/why-citriclean/

Mar 05, 2013 | Maytag 24 in. MDB5600A Jetclean II...

1 Answer

I need to uninstall my maytag dishwasher model DWU4910AAX. It is built into the wall. Cannot figure out where to detach from wall.


There are 2 screws at the top of the dishwasher above the door you will have to unscrew them, but you will also have to disconnect the water line, electrical line and drain line witch are all under the dishwasher behind the kick panel, witch has 4 screws to remove.

May 29, 2011 | Maytag Dishwasher

1 Answer

Last nigh my Maytag dishwasher model # MDB7100Aww serial # 15666931YM caught fire. Luckily I heard it and was able to put the fire out before my house caught fire. Has there been a recall on this model...


Hi,

Yes, there was a product recall for your Dishwasher due to fire hazard. Please visit the following pages for further information:

https://repair.maytag.com/repair/dishwasher.jsp?siteCd=MT_EN_US

https://repair.maytag.com/repair/dish_faq.jsp?siteCd=MT_EN_US


The list includes model numbers beginning MDB7 with serial numbers ending in YM, so yours is one of the units affected.

With regard to repair / replacement / compensation, Maytag state the following:

Remedy: Consumers should immediately stop using these dishwashers, disconnect the electric supply by shutting off the fuse or circuit breaker controlling it and inform all users of the dishwasher about the risk of fire. Contact Maytag for either a free in-home repair, or a $75 cash back reimbursement following the purchase of a new Maytag®, Jenn-Air®, Whirlpool® or KitchenAid® dishwasher. Consumers should not return the dishwasher to the retailer where it was purchased, as retailers are not prepared to take units back.
Consumer Contact: For more information, contact Maytag Corporation at (800) 675-0535 anytime, or visit the firm's Web site at www.repair.maytag.com.

Hope this helps - I would advise phoning them on the number above to find out what your exact position is as this recall was issued in 2007. However, there should not be any time limitations on claims and this still appears to be an active recall. They have admitted the dishwashers are dangerous and thereby accepted liability.

Regards,
BElectric

Dec 09, 2010 | Dishwashers

1 Answer

Repair help for maytag dishwasher MDB9150AWS


all you need is the name brand and model number of the dishwasher in order to purchase a control for your dishwasher. this is found usually on the door or door frame

Jan 09, 2010 | Maytag 24 in. MDB9150A Built-in Dishwasher

1 Answer

When the dishwasher starts it makes kind of a grinding noise and at this time it still is washing the dishes


most likely a piece of bone or glass / china chip. Should clear itself. If it doesn't stop after a few days, you will need to have it serviced.

Oct 21, 2009 | Maytag 24 in. MDB8600AW Jetclean II...

1 Answer

Power not coming on


When a dishwasher appears to be dead, many times the door latch is to blame. On some models, that latch has a safety interlock switch directly controls the power, so that when the door is opened during a wash cycle, power is removed.

The problem is that the interlock switch can fail or get un-aligned, so the dishwasher does not get power.

Depending on your skill level, you can investigate the problem, using a phillips screw driver to open up the latch so you can see the interlock.
Good Luck!

Apr 27, 2009 | Maytag MDB9600A Jetclean II Built-in...

1 Answer

Dishwasher leaks, is there a recall on this model,mdb7100awb


if the dishwasher is leaking water there is no recall on that. the recall i believe you are talking about would be for the rinse aide leaking in the door. you should contact maytag to see about getting the new kit installed on your dishwasher and you may get your leak fixed for free since the kit comes with the door seal.
You can contact maytag at (800) 675-0535 do not wait and do not use the dishwasher. you will need the model number and serial number off your machine when you call. it is located near the door seal on the tub.

Jan 03, 2009 | Maytag MDB7100AWB Dishwasher

2 Answers

Maytag Dishwasher


THE 3 SEC LIGHT WILL NOT SHUT OFF AND WE CAN NOT RUN THE DISHWASHER

Jul 01, 2008 | Maytag 24 in. MDB5600A Jetclean II...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...