Question about Electrolux Dryers

Open Question

Electrolux dryer says erroe 63 call service - Electrolux Dryers

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
hunter19_46m
  • 7482 Answers

SOURCE: electrolux dryer will not start

Hi boltonjamese...

E63 error code means that your dryer thinks the temperature is too hot.

If your unit is still under warranty they should fix it under warranty so I would highly recommend calling warranty to correct this issue as any problem to fix this will involve replacing a sensor or a control board.

Please take time to rate me

Posted on Sep 24, 2011

Ad
inaniae
  • 2 Answers

SOURCE: Electrolux Dryer quit and has a code E 63

Mark, the heating element is underneath the drum, on the left (as facing the front of the unit).

Per the Dryer Tech Data Sheet:
E63 Error Code indicates: [Fault] Heater to Earth Ground [Possible Fault Conditions] Heating element or wiring defective [Possible Solutions] Check heater coils and connections for short circuits to the cabinet. Replace heater and/or wiring and retest.

To open the cabinet is quite difficult, speaking as a non-professional. There may be easier methods than what I used, but I was successful. First I removed all the screws from the back (there are many). This got the top and the back panels removed. The left side (where I could see the heating element was) gave me considerable trouble until I realized I had to remove the door trim to reveal one last screw. Finally got the side off and swapped out the heater. Much much vacuuming for me. I am still trying to figure out how to clean out the bottom of the duct (underneath lint filter), but that's another post.

Also, just in case you don't have the manual and/or need to order parts, I will include a link.

http://www.searspartsdirect.com/partsdirect/part-model/Electrolux-Parts/Dryer-Parts/model-EIED55HIW0/1412/0151200

For some reason, the Sears Parts Direct website lists the dryer as a Gas dryer, which it obviously isn't, as the part in question is very clearly an electric heating element. Hope this helps.

-Nick

Posted on Mar 04, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello I have Electrolux Dryer stop after a a few seconds and gives message ( E05)could any one help me how to solve this problem. thanks in advance.


The videos in the link indicated a heating issue but not in the motor. It states temperature sensors or an element failure. Due to the number of things it could be, your best bet is to call a service engineer.

Electrolux Dryer E05 - Google Search

Feb 20, 2017 | Electrolux Dryers

1 Answer

EF1 error code electrolux dryer


Here is a link to the service manual for the dryer.

Dec 30, 2016 | Electrolux Dryers

1 Answer

Electrolux Dryer quit and has a code E 63


Mark, the heating element is underneath the drum, on the left (as facing the front of the unit).

Per the Dryer Tech Data Sheet:
E63 Error Code indicates: [Fault] Heater to Earth Ground [Possible Fault Conditions] Heating element or wiring defective [Possible Solutions] Check heater coils and connections for short circuits to the cabinet. Replace heater and/or wiring and retest.

To open the cabinet is quite difficult, speaking as a non-professional. There may be easier methods than what I used, but I was successful. First I removed all the screws from the back (there are many). This got the top and the back panels removed. The left side (where I could see the heating element was) gave me considerable trouble until I realized I had to remove the door trim to reveal one last screw. Finally got the side off and swapped out the heater. Much much vacuuming for me. I am still trying to figure out how to clean out the bottom of the duct (underneath lint filter), but that's another post.

Also, just in case you don't have the manual and/or need to order parts, I will include a link.

http://www.searspartsdirect.com/partsdirect/part-model/Electrolux-Parts/Dryer-Parts/model-EIED55HIW0/1412/0151200

For some reason, the Sears Parts Direct website lists the dryer as a Gas dryer, which it obviously isn't, as the part in question is very clearly an electric heating element. Hope this helps.

-Nick

Mar 03, 2014 | Electrolux EIED55H Dryer

1 Answer

Error message E-63


E63= Heater to Earth GroundHeating element or wiring defective


Check heater coils and connections for short circuits to the cabinet. Replace heater and/or wiring and retest.

Nov 05, 2012 | Electrolux Dryers

2 Answers

I have an E63 Dryer Error on my Electrolux Dryer - My husband is able to test and fix if someone can provide some information on the steps he needs to take. Please advise.


Hello & Welcome to FixYa

Error E63 in your Electrolux Dryer indicates that the temperature inside is too hot/overheating, to start with check the vent and try to clean it. If still it's not resolved then the issue is with the thermal fuse going bad and needs to be replaced. It is mounted to the exhaust duct inside the back cover panel. Please get back to me if you have any other questions.

Kevin

Dec 16, 2011 | Electrolux EIED55I Dryer

1 Answer

Electrolux dryer will not start code E-63 appears on the screen


Hi boltonjamese...

E63 error code means that your dryer thinks the temperature is too hot.

If your unit is still under warranty they should fix it under warranty so I would highly recommend calling warranty to correct this issue as any problem to fix this will involve replacing a sensor or a control board.

Please take time to rate me

Sep 24, 2011 | Electrolux Dryers

1 Answer

WHAT IS ERROR CODE E 63


its ur dryer getting too hot. try to clean all your lint out of your unit. if that doesnt work then your heater tube is shot and will need replaced.

Oct 27, 2010 | Electrolux EIED55H Dryer

1 Answer

New electrolux EWGD65HTS dryer posts fault code E71 following "install mode". gas and electric installed corrrectly.


if this unit is new do not try and fix yourself. if your break anything it will void your warrenty. call electrolux they have great service companys and if they can trouble shot it with you they will overnight the parts to your house and set up service for you. electrolux is a great company and will help you get your dryer fixxed as fast as they can

Jul 03, 2010 | Electrolux EIED55H Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

JP Services
JP Services

Level 2 Expert

310 Answers

John

Level 2 Expert

125 Answers

Are you an Electrolux Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...