Question about Food Mixers

1 Answer

Beaters in mixer in down position And can't seem to be able to raise them. What is the secret?

Posted by on

  • 1 more comment 
  • bs26105
    bs26105 May 15, 2017

    This is an Oster Regency kitchen center.

  • Pamela Leach
    Pamela Leach May 15, 2017

    I see a lever on it. Put it on number 3 and see if that works.

  • bs26105
    bs26105 May 15, 2017

    Pam thank you very much for trying to help me, I don't see a number 3 on mine. I wish I could send you a picture. I bought this for my daughter several years ago and it was never used much, she pasted away a few months ago and I can't find the manual. It is like new and has attachment for a processor and ice cream freezer with it.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,830 Answers

Is there a lever on the side that would raise them?

Posted on May 15, 2017

  • bs26105
    bs26105 May 15, 2017

    Not trying to release the beaters but raise them.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Find Beaters for Bravetti Mixer

seems to have been already answered on Fixya

Call 1-800-798-7395. I just ordered some for my mixer. Cost $7.95 + $4.95 for 2. Be sure to have your model number when you call.

need beaters for Bravetti 300W hand mixer

Dec 11, 2015 | Bravetti Food Mixers

1 Answer

The release button to raise the body to take off the beaters will not release. I can't get the bowl out or remove the beaters. Please help.

Put a few drops of cooking oil in the holes the the beaters are inserted inMake sure to unplug the unit. Pushing the button, work the beaters pulling lightly. Good Luck

Aug 11, 2010 | Sunbeam 2370 MixMaster Series Stand Mixer

1 Answer

I can't get the tilt release to release to raise the mixer . I have a batch of cookie dough in the bowl and I am unable to raise the mixer

Try running the mixer for a few seconds to clear anything out from under the beaters, like a chocolate chip. You can also try pushing down on the beater end of the mixer, press the button and lift.

Nov 01, 2009 | Sunbeam 2346 Heritage MixMaster Series...

1 Answer

What screw do i turn on the standkitchenaid to lower the beaters?

Hi. You can adjust the clearance by turning the adjustment screw counterclockwise. This screw will only turn 90 degrees either way so dont try to force it any further than that. This adjustment dosen't lower the beater, it raises the bowl a bit.

With the bowl-lift in the low position, you'll see a screw on the column of the mixer facing toward the front. This is the adjustment screw. Use the flat beater to check the clearance.

If this solution has assisted you, please rate it. Good luck! ricardok45

Apr 01, 2009 | KitchenAid KP2671 Professional 6 Series...

1 Answer

Turntable does not turn. Motor runs. Beaters work.

I have the same one, and the turn table has never turned on it's own. from looking at the bottom of the stand, i think the mixers are supposed to turn the bowl, so i just give it a little turn, and the mixers kinda take care of the rest. BTW, i got 2 sets of beaters with mine and i dont know what the second set is for, do you? contact me at

Feb 18, 2009 | Sunbeam Food Mixers

3 Answers

Kitchenaid k45ss won't turn on

if you remove the top you will find a tiny fuse wrapped in a black band on the left side from the back. It connects two white wires which power the top-side motor brush. Most likely this needs to be replaced. You can check by bypassing it with roach clips or a copper wire. Unplug the machine first and be careful!

Jan 25, 2009 | KitchenAid KT2651X Epicurean Stand Mixer

2 Answers

How do I Open Up a KitchenAid RRK150 Mixer?

you have to take the pin out from right above where you put the beaters on, and then you can tap the circle part off, and get into the inside...

Oct 29, 2008 | KitchenAid RRK150 Stand Mixer

1 Answer

Mixer is stuck in the down position

If the mixer is under a year old and you have a receipt, send everything in,beaters, bowls, book, etc, to Authorized Appliance and Repair in St. Louis Missouri and you will receive a brand new replacement or ungrade free of charge. Make sure you have your Name,address & phone number with the unit.

Nov 05, 2007 | Sunbeam 2351 Legacy Stand Mixer

2 Answers

Incomplete mixing

You need to raise the bowl just a little less than the thickness of the layer presently being left behind. Too much and the beaters will touch the bowl .

Jan 31, 2007 | Bosch 700 Watts MUM7010 Concept Series...

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Food Mixers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Oscar Netto
Oscar Netto

Level 2 Expert

110 Answers


Level 3 Expert

80531 Answers

Are you a Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides