Question about Computers & Internet
Fixya site cannot help you
talk with social security and use doctors certificates to help in your application
Posted on May 15, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Disable wireless function
Disable SSID Broadcast Please visit http://support.dlink.com/faq/view.asp?prod_id=1196 for complete FAQ.
Step 1 Open your Internet browser and type the IP address of the router in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (default password is blank).
Step 2 Click on the Advanced tab at the top of the configuration page and then click the Performance button on the left side.
Step 3 At the bottom of the Performance page, click on Disable next to the SSID Broadcast field.
Step 4 Click on Apply. Wait about 15 seconds to allow the router to save the changes and then click on Continue.
I hope that helps!
Good luck and have a nice day!
Posted on Dec 01, 2008
Wiring diagrams can be found online, however i believe you can re-learn the key by leaving it inside the ignition tumblen and switch it to accesory. Then disconnect the b attery for about ten minutes and then try starting the car without taking the key out.
Posted on May 03, 2009
Reset the router then try it.:
Step 1 Locate the reset pinhole on the back of the unit.
Step 2 With the unit powered on, press and hold the Reset button.
Step 3 Hold the Reset button for about 10 seconds.
Step 4 Release the Reset button.
Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.
Step 6 The device is now at factory defaults.
Posted on Jul 29, 2009
yes, do some internet searching, I believe there is a control that you unplug inside the hatch on the left hand side, remove the inside plastic panel, undo the connection, wait 5 minutes then reconnect. This I have done once along time ago on a 94 model. Remember I am only here to help and wish this works for you. Good luck.
Posted on Dec 16, 2009
SOURCE: My new router WRT120N drops
to be more sure you can use wpa personal because wpa2 is not compatible with all of the wireless apdaptes, you can also upgrade the firmware of the router,
>>go to homesupport.cisco.com and download the latest firmware for the router and it will fix all the issue that you have
Posted on Oct 11, 2010
Tips for a great answer:
Jan 11, 2018 | ssa.gov Computers & Internet
Jun 23, 2017 | HIS Computers & Internet
Mar 18, 2016 | Computers & Internet
Mar 16, 2016 | Computers & Internet
Jan 09, 2015 | Computers & Internet
Jan 01, 2012 | Facebook Social Network
Mar 30, 2011 | Facebook Social Network
Mar 26, 2011 | Facebook Social Network
Mar 15, 2011 | Facebook Social Network
20 people viewed this question
Usually answered in minutes!