Question about Janome Memory Craft 9000 Computerized Sewing Machine

Open Question

I inherited a Memorycraft 9000 which hasn't been used for years. When plugged in and turned on there was a red light which just faded and nothing happens. Any suggestions?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 161 Answers

SOURCE: how do i lower the dog feed on my memorycraft 9000

there is a small lever at the back ( behind the bobbin case etc) that manually drops the feed dogs, also you can do it using the ADJ key. It should do it automatically when the embroidery mode or edit mode is pressed

Posted on Sep 11, 2010

SOURCE: janome 9000 user's manual. I lost mine when I shifted house

send email to info@sewingpartsonline.com

Posted on Jan 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hand wheel won't move.Scissorbutton wont work.


Repairing a Janome or New Home Sewing Machine ...

www.thriftyfun.com/Repairing-a-Janome-or-New-Home-Sewing-Machin...
Question: Memory Craft Machine Won't Run ... I'm a computer repair technician and good with tools, is this something I could fix or should we .... machine which will zig zag fine if i turn the wheel by hand or sew very slowly; as soon as I speed ...

Janome won t turn Sewing Machines Questions & Answers ...

www.fixya.com > Forum > Tags > won t turn > Sewing Machines
Janome sewing machines won t turn related questions and answers. ... Ad. Question about Memorycraft 6500P Computerized Sewing Machine ... it could be a part has worn or broken, esecially when the hand wheel won't turn,, it needs to be.

Janome wheel not turning Sewing Machines Questions ...

www.fixya.com > Forum > Tags > wheel not turning > Sewing Machines
Janome sewing machines wheel not turning related questions and answers. ... 10000 janome jamming fly wheel won't turn fly wheel won't turn warning for too thick ...the hand wheel is not moving the needle at all Hi I was unable to move the needle at all ... Janome Memory Craft 9000 Computerized Sewing Machine.

Jan 25, 2016 | Janome Memorycraft 6500P Computerized...

2 Answers

How to fix bobbin thread on computered memorycraft 9000 sewing machine ?


1)Check that your bobbin does not have a nick in it where the thread can catch and won't feed smoothly.2) make sure the upper and bobbin threads are the same.3) pull out the bobbin case and chect to see if there is a clump of lint.4) make sure the feed dogs are moving the fabric through smoothly,some fabrics can get caught on the dogs and make the bottom thread get loopy.5) check your needle,if it's bent or has a bad tip,it can mess up the stitch.

Aug 15, 2014 | Janome Memory Craft 9000 Computerized...

1 Answer

My janome 11000 memorycraft's needle threader has jammed in the down position and cannot be moved


Thanks to floraq803, we have our 11000 working again. The needle threader was stuck in the down position. We turned off the machine, and turned the wheel (which controls where the needle is) until the needle threader bar was straight (approximately 1/2 way between the needle being all the way down and all the way up). Turned on the machine and the threader came back up again. Now back to sewing.

Jan 20, 2013 | Janome Memory Craft 9000 Computerized...

1 Answer

I have a Janome Memorycraft 7000 machine. The display has gotten progressively darker and now I cannot see it at all to select stitches. What do I need to purchase to fix this and where do I get it?


This could be a symptom of a backlight issue for the LCD screen. The entire screen may need to be replaced. If your sewing machine is under warranty, take it to the shop or contact the company. For contact info see: http://www.janome.co.jp/e/e_links/america.html . I do not see a MemoryCraft 7000 listed on their site. The 9000 is listed as a retired model which came with a 20 year warranty (except for the electrical/electronics which have a 2 year warranty).

Unfortunately, Janome doesn't sell repair parts to non-dealers to the best of my knowledge.

I wish that I had better news.

Cindy Wells

Dec 14, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

How do i lower the dog feed on my memorycraft 9000


there is a small lever at the back ( behind the bobbin case etc) that manually drops the feed dogs, also you can do it using the ADJ key. It should do it automatically when the embroidery mode or edit mode is pressed

Aug 07, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

Where to obtain new screw for embroidery hoop


you need to contact Janome here

http://www.janome.co.uk/contact.php

Feb 13, 2009 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

179 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...