Question about Sceptre Televison & Video

1 Answer

I have a Sceptre e505bv tv I only had it for a year I get sound but no picture I put a flash to and get video what do you think it is

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sceptre Master
  • 73,647 Answers

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Posted on May 14, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

6 Answers

Sceptre X32GV-Komodo


See troubleshooting (p.96-99) of user manual
but Unfortunately i think this problem is for Sceptre ...
For technical help, contact our Sceptre Technical Support Group via email or
phone. Please have your Sceptre p/n number, serial number, and date of
purchase available before you call.
Tech Support E-mail : monitor-ts@sceptre.com
Customer Service Email : cs@sceptre.com
TEL : 1800-788-2878
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM Pacific Standard Time

Mar 20, 2008 | Televison & Video

1 Answer

No picture or sound. when you turn it on it will flash "SCEPTRE" for a second and then go black. If i replace the capasitors will it be ok


You need to be able to test those capacitors and that takes a special meter. They can fail without any outward signs of failure.

Mar 13, 2016 | Sceptre X32BV-Naga 32 in. LCD TV

1 Answer

Sceptre tv, no sound no picture


In other-words it is dead. Check its main power regulator board. Replace it.

Jan 09, 2013 | Sceptre 32 X320BVHD 32 LCD TV

1 Answer

SCEPTRE X320BV i HAVE PICTURE ON YpbPR BUT NO SOUND/I HAVE SOUND IF IT'S TURNED ON AV


Connect the same input device to some other TV and check. Connect some other device with composite connections and check the TV.

Aug 06, 2012 | Sceptre X32BV-Naga 32 in. LCD TV

2 Answers

Tv is on with no picture or sound, only 4 months old!!


Hello
The power supply regulator board to your set has the fault. If you try to open the set, or try to repair it by yourself, the warranty will void. The set must have warranty as it is new. Why do you spend for it? Just contact the nearest authorised service center for Sceptre. the components in this set will be very hard to get from open electronic spare part market, and will costly too.

Mar 11, 2012 | Sceptre 32 X320BVHD 32 LCD TV

1 Answer

I have a sceptre 32 inch tv and there is only sound no picture


usually problems with the screen such as sound but no screen means the backlight or power inverter is gone. you can check this out by turning the TV on or off. If you faintly see the screen pop up then go away, and if you shine a flash light on the screen you can still barely see it then it's that problem. You have to buy parts from your manufacturer or open up the TV and see if any transformer or capacitors are toast.

Feb 18, 2011 | Sceptre X32BV-Naga 32 in. LCD TV

12 Answers

Sceptre X30SV LCD display goes black with sound... Inverter? and other parts...


I too have the same problem...Searched and waited long time for parts. I have replaced everything and the thing still flashes and goes blank but has sound. Not worth anymore stress. My neighbor is an electrical engineer who I used to think can fix anything. He too is baffled. My fix suggestion... Getting a new LCD (not a Sceptre) tonight...with an extended warranty...Sceptre (and their tech's) no help if you don't have a warranty. I learned my lesson!

Oct 29, 2007 | Sceptre NagaIII X30SV 30 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Sceptre Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...