Question about Cooktops

1 Answer

After washing my gas cooktop one burner is lighting up but the flame dont came up pt

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Most ignition-related issues are because the burner head gets clogged after cleaning or after spillovers. If the cooktop or burners were recently cleaned, there could be moisture in the burner head ignition port (hole) and flame ports.

Posted on May 13, 2017

  • Valerie Emer
    Valerie Emer May 13, 2017

    what to do to solve the problem?

  • Dawn
    Dawn May 13, 2017

    After physically drying & checking for any obstruction (remove obstruction from the end of the ignition port if necessary) allow to try for 12 - 24 hours

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

So when I try to light one burner - it lights up. After 20-30 seconds, there is stlll a clicking sound then the burner goes off. I cannot figure this out, can anyone help? Really appreciate it. Thanks


It probably has a flame failure device..
This is to cut off the gas if the flame goes out..
When you light the burner, the flame heats a sensor which keeps the gas on, if this is faulty, the gas will go out.

Jun 23, 2014 | Kenmore 36 in. 33384 / 33385 / 33389 Gas...

1 Answer

Yellow flame


The problem is with the orifice leading to the burner. If it is not centred then you will get yellow flame. Or you are impeding the flow out of the burner and it is not mixing properley. I would pull the burners apart and make sure everything is clear and the orifice is centred.

Apr 14, 2014 | GE Monogram ZGU48N4GHSS / ZGU48L4GHSS...

1 Answer

Large burner elements ignite, and igniter spark fails to stop, then the burner shuts off as if ignition failed. Tiny central burner element does NOT light at any time. Apparently the safety cutoff...


There is a thermistor that must be in the flame area that needs to get hot. When hot it will turn the igniter off and keep the flame on. Check it's location and if it is in the flame then it needs to be replaced. not sure about the central flame problem. could be the switch.

Sep 20, 2010 | Gaggenau 36 in. KG 291 Dual (Electric &...

2 Answers

Gas stove burner will not turn on


Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

Apr 29, 2010 | Gaggenau 23 in. KG 260 Gas Cooktop

1 Answer

Miele gas cooktop flame shuts off after lighting. If I keep the button down longer to allow more gas to flow to the burner it will stay on.


I had similar problem.Solved by Miele tech by placing rice grain sized wad of paper towel inside knob so it sits slightly higher on the valve shaft.

Oct 05, 2009 | Miele 35 in. KM391G Gas Cooktop

1 Answer

Burner flame on GE 5 BURNER cooktop (JGP637) is orange


You have trash, corrosion or a mis-aligned part.
Check and repair these and you will be fine.

Feb 20, 2009 | GE 36 in. JGP628 Gas Cooktop

1 Answer

Kenmore Elite 30" gas cooktop installed. Large right front burner


There are a series of holes in the burner leading down from the main flame area to the pilot tube, ensure the holes are not plugged/restricted.

Feb 11, 2009 | Kenmore 30 in. 42701 / 42702 / 42709...

1 Answer

GE 36" Monogram Gas Cooktop - low flame


I would have someone come out. Perhaps a gas plumber first. Gas is not something you want to fool around with yourself.

Aug 01, 2008 | GE 36 in. JGP628 Gas Cooktop

Not finding what you are looking for?
Cooktops Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cooktops Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Paul Carew

Level 3 Expert

2598 Answers

Brad Brown

Level 3 Expert

16194 Answers

Are you a Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...