Question about Toshiba Office Equipment & Supplies

Open Question

Have a toshiba estudion 161, there is error H4 how can i fix it

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
disastertech
  • 62 Answers

SOURCE: I have a toshiba estudion 161, there is error H4 00... what is this can you help me.

1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.)

If the machine dies enter 14 then press start. the machine will reboot normally.

If not contact service centre

Posted on May 11, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset Toshiba e-Studio 161 Copier Copier with "error code H4"


Step 1:-
Press
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO Key
(Note:Perform the first two key strokes quickly )

Machine display should stop blinking
Now press 14 and press start button.
Switch off and on to check

Feb 27, 2016 | Toshiba Office Equipment & Supplies

1 Answer

Error code H4


Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.
  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.
Toshiba studo120 H4 error code

May 06, 2015 | Toshiba e-Studio 161 Copier Copier

1 Answer

Error reseting h4 for toshiba


H4 is probably a fuser temperature code. Sadly the 161 is obsolete and parts are no longer being made. You'd be wasting money getting a new fuser for it. Time to upgrade.

Jan 04, 2013 | Toshiba E-Studio 161 Copier

2 Answers

Estudio 161 4h error code


h4 low heat from heater unit do the following [c key]-[auto/text/photo key]-[c key]-[auto/text/photo key] machine will go dead key in 14 press print machine will cycle if the error code returns you will have to replace thermistors and thermofuse

Mar 19, 2011 | Toshiba E-Studio 161 Copier

1 Answer

MY COPIER INDICATES SYSTEM ERROR H4 00, HOW DO I CLEAR IT


H4 00 Heat roller low temperature detection.

The thermistor in the fuser is dirt. Clean it.

Jan 21, 2011 | Toshiba e-Studio 161 Copier Copier

1 Answer

Error h4


check the ff. parts of fusing unit , thermistor, thermoswitch & heaterlamp

Dec 06, 2010 | Toshiba e-Studio 161 Copier Copier

2 Answers

Error h4


H4 in 161, fuser low temp.; instantly solve it by simulation (c-auto-c-auto) 14; check thermistor; check fuser lamp by 5-02. it is to blink!

Jul 07, 2009 | Toshiba e-Studio DP170F Plain Paper Laser...

4 Answers

I have a toshiba estudion 161, there is error H4 00... what is this can you help me.


1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.)

If the machine dies enter 14 then press start. the machine will reboot normally.

If not contact service centre

May 06, 2008 | Toshiba e-Studio 161 Copier Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

628 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

103 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...