Question about Washing Machines
Bosch wfk 2401 stacked washer
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, To enter test program for WFK 2401 washers: 1) Set cycle knob to any "X" (reset) position 2) Press and hold Pre-Wash and Start buttons at the same time. While still holding Pre-Wash and Start buttons, turn unit on by pressing On/Off button. When test program has been entered: Start light will flash
Welcome to FixYa.
Based on your description it sounds like a faulty door lock mechanism. As you may or may not already know the 06 error code for the WFK2401 Bosch washer indicates an error in the lock has been detected.
This is from the Bosch service tips I have, so you should be able to check it with this info...
I also have this available to you in "pdf" and I can send you if you want to provide an email address since the "pdf" cannot be attached or sent via these post's.
You can also run a self diagnostic/test program by following these steps I've laid out, then let me know what you find...I suspect a faulty lock as I alluded to though.
3) Keep holding Pre-Wash and Start buttons (only) until digital display comes on (~ 5 seconds).
**HINT: Turning washer off at any time will end test program**
Digital display will show 00 for no faults or will show fault codes below:
Let me know what you find as I said or if you require further assistance. Thanks for choosing FixYa for your repair inquiry and good luck
please rate the solution I provided accordingly.
To enter test program for WFK 2401 washers:
1) Set cycle knob to any "X" (reset) position
2) Press and hold Pre-Wash and Start buttons at the same time. While still holding Pre-Wash and Start buttons, turn unit on by pressing On/Off button.
When test program has been entered:
Start light will flash
Posted on Dec 29, 2010
It means you need to repeat the checks on fuel
supply, thermal regulator,
check for correct orifices,
etc., per your owners manual. Check pages 42-43 for more information.
Posted on May 06, 2011
try going google and typing in -user manual for (make and model not stated ) radio in honda odyssey--- in that manual there will be a section telling you how to change the language
failing that go to your honda service dealer and they will know how to change the language settings
check the glove box for a user manual as well
Posted on Jan 15, 2016
Tips for a great answer:
Apr 15, 2014 | Computers & Internet
Jun 15, 2011 | Televison & Video
Mar 22, 2011 | Televison & Video
Jan 31, 2011 | Orion Televison & Video
Oct 13, 2010 | Televison & Video
Aug 10, 2010 | Televison & Video
May 21, 2010 | Washing Machines
Oct 12, 2009 | Televison & Video
Mar 23, 2018 | Samsung Washing Machines
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: