Question about Indesit W 123 Front Load Washer

2 Answers

Indesit WIA 101 Machine wont start.No power - Indesit W 123 Front Load Washer

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Indesit Master
  • 1,525 Answers

Hello if the fuse in the plug ok the check the glass fuse inside the machine it will be on the circuit board good luck

shaun

Posted on Aug 04, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

First check the fuse,if this is ok,you will require a main control board,this will require programing for you model and comercial code

Posted on Aug 02, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 343 Answers

SOURCE: Changine a heating element on a washing machine Indesit WIA 101

Sam. The small nut and bolt which protrudes between the element ends should be loosened but not taken off. Press on the bolt, which will relax the compression on the rubber sealing block. This should allow you to extract the element. Once you have done this it will become clear..

Posted on Apr 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Indesit wia 101 stuck on one part of cycle and won't move on


check pump for blockage remove plug for 15mins re try

Apr 19, 2015 | Indesit Washing Machines

1 Answer

Indesit WIA121 Flashing Door Lock, Prewash and Spin Lights - Machine not draining


hi something similar has started happening to our washer, after the initial wash starts the machine doesn't do anything for a while then the red door light flashes on and off very quickly as does the 1st and 3rd green wash cycle light?

Jul 04, 2012 | Washing Machines

1 Answer

I have an indesit wia 101 front loader washing machine. At the moment it will not drain or spin & the red light flashes really quickly


HI,
Check back of washe with a flashlight for a bent or clogged drain hose. Do not move washer to check it. When you move it , it will straighten out and you will never know if it was bent
Also while it is pumping , pick up end of drain hose at drain and observe the volume of water being pumped.
If no water then the Pump may need replaced
Thank you for using fixya
Leo Ponder
Please rate me if this helped

Aug 12, 2011 | Indesit W 123 Front Load Washer

1 Answer

Start/stop button pushed in on Indesit WIA 101 Washer, works fine once going but have to use knife to try and lever the button - getting progressively harder to get the machine started. Please advise


The circuit board behind the button has probably clipped out of position. This is easy to fix and shouldn't take more than a few minutes.
1. UNPLUG THE MACHINE 2. Remove the two screws holding the lid of the machine in position. These are at the back, underneath the lid overhang at the outer edges. 3. Slide the lid of the machine backwards and it should just lift off. 4. You will now be able to see the circuit board and re-secure it behind the little plastic clips. 5. Replace the lid and test the machine.

Dec 04, 2010 | Washing Machines

1 Answer

Changine a heating element on a washing machine Indesit WIA 101


Sam. The small nut and bolt which protrudes between the element ends should be loosened but not taken off. Press on the bolt, which will relax the compression on the rubber sealing block. This should allow you to extract the element. Once you have done this it will become clear..

Feb 20, 2010 | Washing Machines

1 Answer

Indesit WIA 121 not working - door latch not shutting


At first thought it was door lock mechanism was at fault but proved it to be ok - removed rubber 'boot' which on this model was on two stretchable spring retainers and checked operation of door lock.
Thought door hinges may have been bent so dismantled door, finding the problem to be the pin that the door latch pivots on had come out on one side so not lining up properly. This was easily pushed back into position.

Oct 05, 2009 | Indesit W 123 Front Load Washer

1 Answer

Door gasket damaged


Have you sorted your problem out yet?
You can get any spares you need by going on line to:www.hotpoint.co.uk, and followning the links.
Good luck.

Dec 02, 2008 | Indesit W 123 Front Load Washer

1 Answer

Indesit WIA 101


to open do power off after 5 min open the door with power off

Jul 27, 2008 | Indesit W 123 Front Load Washer

2 Answers

Indesit WIA 121


this could be your interlock this is what sends power if this is not working the washer wont work simple way to test is close the door and bang the front of the washer were the interlock is if its a faulty interlock or a lose wire then it may start up but more then likely that it is the interlock m8

Feb 18, 2008 | Indesit W 123 Front Load Washer

2 Answers

INDESIT WIA 101


Press "end of cycle" for 3 seconds, & tell me what happened.

You will rate me also.

Jan 19, 2008 | Indesit WA 115 Front Load Washer

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

Darren Moxam
Darren Moxam

Level 2 Expert

67 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...