Question about Jenn-Air Kitchen Ranges

Open Question

The convect fan on my Jenn-Air SCE 30600 slide in range comes on intermittently even when the range is off(not cooking). Do I need to replace the control board?

It started when we were using convect bake and the fan kept running after we shut the oven off. Then it would just come on and run even though we were not using the range. Then it would go off after some time. I also noticed that when I went to pull the range out today that when I lefted up on the lefdt front corner just below the left most control knob the fan woul stop. It would start again when I released the pressure.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Jenn-Air SCE 30600, oven error codes F1 and Probe

An F-1 error code on your model means the element was energized when it should not have been, A shorted interconnect harness or failed power relay board.

A probe indication could be a failed meat probe jack or bad harness in a unit that has one. In a unit without a meat probe, suspect a bad board.

Both conditions would warrant bringing in a tech.

Before you do, turn off the circuit breaker fot 3 miutes and turn it back on. This will reboot the boards. If problem persists, the call a service tech.

Posted on Nov 04, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Convection fan runs from start up , but when temp ia achieved , fan stops working and shows con on the display


Search Results

    Frustrated with new Samsung stove! - Forums - CNET

    www.cnet.com > Forums > Samsung

    CNETWe purchased a smooth top, convection Samsung range , with delivery on ... I seem to have the same problem with my new samsung range FER700WX. ... That ovenwould not reach temperature and if it did, it would not keep the temperature. ..... 3) as the oven restart the convection fan or fans blow such hot air the food in ...

    Convection 101: A Guide to Cooking With Fans - Oven ...

    ovens.reviewed.com/.../convection-cooking-101-a-guide-to-cooking-ba...
    Apr 4, 2015 - Problem is, it uses a ton of water. 6.2 ..... Convection ovens use a fanand an extra heating element to correct ... it's best to reduce oven temperature first, before adjusting cook time. ... range or wall oven, there's simply no reason not to ponyup. ... From futuristic to freaky, these fixtures run the entire spectrum.

    New Bosch range convection fan not moving? - Home Forums

    ths.gardenweb.com > Home Forums > Appliances
    Oct 8, 2007 - On my range (the slide-in version) the cooling fan runs even when in ... I was the one with the Bosch fan problem and if there is a problem with ... Mine does stop turning when I open the door and starts again when I ... convection roast feature, and once the oven reached temperature, ... Sign Up to Comment.

    Troubleshooting Gas Range and Oven Problems ' Back ...

    blog.etundra.com > Tundra's Tech Talk

Jan 17, 2016 | Kitchen Ranges

1 Answer

Cooling fan below range top goes on and stays on even when oven is off


That sure cools...

Jenn Air Oven SVD48600B continuous fan - ApplianceBlog

www.applianceblog.com/.../12231-Jenn-Air-Oven-SVD48600B-continu...
Dec 10, 2007 - 10 posts - ‎4 authors Turned the oven on to 250, and the cooling fan (not exhaust fan, not convection ...What part number would this be for our Jenn Air SVD48600B range? ... It may only be that the fan comes on and stays on when not needed. ... Caveat: the same thermometer says my Jenn-Air wall oven is also 50* below the ... Jenn-air JDS9860AAP Oven won't turn on - ApplianceBlog
10 posts
Mar 24, 2013
Jenn-Air SVE47600 Downdraft Fan Not Working
8 posts
Nov 30, 2010
Jenn Air Oven SVE47500B oven light and fan stay on ...
6 posts
Nov 20, 2010
More results from www.applianceblog.com

Nov 21, 2015 | Jenn-Air Kitchen Ranges

1 Answer

Jenn-air micro convection - cooling fan comes on when door is opened, then goes off, intermintent problem


I have seen where one of the door switches becomes intermittent causing the symptoms you are describing, tough to nail down considering there are more than one door switches.

Jun 16, 2012 | Jenn-Air JMV9169B Convection/Microwave...

1 Answer

Jenn air convection fan squeals (JGS8850BDS)


turn power off remove gill in oven remove fan blade now remove back panel and remove convection fan motor and wirers Now revere procedure to install new fan motor Cheers

May 05, 2012 | Jenn-Air JGS8850 Gas Kitchen Range

1 Answer

Heating element in my electric Jenn-air oven


This is one of the most simple repairs you can make on your range. And it's so affordable that you shouldn't think about replacing it!!

Just contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service
with your complete model number and we provide part removal/installation instructions for you when you purchase your parts through us.
We want to get you cooking again soon, so call us asap.
We look forward to working with you! Thanks, Ella

Jan 07, 2010 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

Jenn-Air SCE 30600, oven error codes F1 and Probe


An F-1 error code on your model means the element was energized when it should not have been, A shorted interconnect harness or failed power relay board.

A probe indication could be a failed meat probe jack or bad harness in a unit that has one. In a unit without a meat probe, suspect a bad board.

Both conditions would warrant bringing in a tech.

Before you do, turn off the circuit breaker fot 3 miutes and turn it back on. This will reboot the boards. If problem persists, the call a service tech.

Nov 04, 2009 | Jenn-Air SCE30600 Slide-In Electric...

1 Answer

Jenn-air slide in range/convection


its not a loose wire. jenn-air is famous for having to replace the display board. once you replace it it will be fine

Nov 28, 2007 | Jenn-Air SVE47100 Slide-In Electric...

2 Answers

Don't know if the oven part of range is gas or electric


open the door on the left side low down you will find the model and serial number .
Visit the jenn-air website @ www.jennair.com or click
https://www.jennair.com/customer_care/contact_us.jsp

to email them and they can tell from the serial number and mail you back...

Nov 15, 2007 | GE JBP68 CleanDesign Electric Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

969 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2250 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...