Question about The Computers & Internet

Open Question

Kenwood remote RC-R0407. Volume button does not work

Tried to open up the unit, but I am afraid that I might break something. All other buttons are working.I have a universal remote, that works to some extend. But I would like the original to work.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 38 Answers

SOURCE: Volume and mute buttons suddenly stopped working

Try changing the batteries. Most times the "tivo" buttons will work but the "tv" buttons will stop working when the batteries are low.

If you have done that, go back into settings and program the remote again for your tv, then give it a shot.

Posted on Nov 28, 2007

  • 280 Answers

SOURCE: Onkyo RC-649M remote

Remove any screws you can see and pry the case open. you will see a rubber pad and a circuit board. Clean both with alcohol and dry. reassemble and it should be OK

Posted on Jan 23, 2009

  • 1 Answer

SOURCE: My Chamberlin remote garage door opener stopped working.

Try this website for a possible solution

http://www.bearcatco.com/helpgifs/liftmaster_troubleshooting.html

Posted on Feb 16, 2009

  • 814 Answers

SOURCE: Can RC65 remote replace the original RCA Remote for DirectTV?

http://shop.ebay.com/items/rca+universal+remote?_dmd=2&_cpr=249 this is a e-bay web page link for purchasing RCA universal remote controls. Here you will find all different makes and models of RCA remote controls. They are for immediate sale and for auction. You should find the model number of your old remote control and put the number into a search engine to find the replacement mode for your television.l.Once you have the model number you can go to the e-bay web page and find the model and purchase it. If you cannot find it there. Use the model number in the search engine to find places to purchase the replacement. I hope this information help you find a replacement remote control for your television. Thank you for using FixYa and have a nice day!

Posted on Jun 20, 2009

  • 1 Answer

SOURCE: Can I Get a Kenwood RC-R0608 Remote to work with a Kenwood VR-206 A/V Reciever

i WILL BUY YOUR Kenwood RC-R0608 Remote
rlupton@atral.com

Posted on Jul 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kenwood RC-150 Learning Remote. How do I delete a programmed key


Remove the batteries and let the remote sit idle for a time until retained memory fades. Reinstall the batteries and start over again.

Nov 16, 2013 | Kenwood Remote Control RC-150...

1 Answer

I have a GE Universal Remote RC 94948-H 1030. It only has channel and volume buttons how do I program it. I know the code but not the method of input. Its something to do with the channel and volume...


I have a GE Universal Remote RC 94948-H 1030. It only has channel and volume buttons how do I program it. I know the code but not the method of input. Its something to do with the channel and volume buttons

Feb 04, 2011 | Televison & Video

2 Answers

The RC R0509 remote control does not respond to the receiver. I bought a universal remote and tried all the codes but still no responce.


people say that you have to tap on the receiver near the remote sensor. I don't know exactly where that is though since these are RF (radio frequency) not IR remotes, so there isn't a sensor panel in the front. I'd just tap along the front edge with the handle of a screwdriver or something. People say it works a treat.

Dec 05, 2010 | Kenwood VR-405 Receiver

2 Answers

Kenwood DNX8120: Hard Buttons Stopped Working


so does anyone know short of sending the unit by to kenwood?

Dec 30, 2009 | Kenwood DNX8120 DVD Navigation Receiver...

2 Answers

Kenwood ddx512


The unlock code usually only goes on if you previously put one on there. I would suggest calling Kenwood but there is a guy that claims he can fix this i have never tried this but you can. http://mike-unlockcodes.blogspot.com/

Apr 24, 2009 | Kenwood DDX-512 Car DVD Player

1 Answer

I have the Onkyo 706 with remote RC-717M. My remote just suddenly started to malfunction. The volume up is turning it down and vice versa. The power button to shut the receiver off is doing the function...


Have you tried resetting the remote? According to the manual (page 101), press and hold the RECEIVER button, press the AUDIO button, wait approx 3 sec. until RECEIVER highlights and finally press RECEIVER again. Of course if you've programmed a remote control code for your PVR in the RC-717M, you'll have to do it again.

Oct 18, 2008 | Onkyo Audio Players & Recorders

1 Answer

Amplifier will only put out "faint" music, etc, even when the volume is turned all the way up


This may sound silly, but please check to be sure that the tape monitor switch in not engaged. Update this if that is not the problem.

Dan

Sep 29, 2008 | Audio Players & Recorders

1 Answer

Receiver will not work by remote


Hi!

Here are suggested solutions for you!

Unfortuntately, you and many others have this problem. I will point you in the direction of two "fixes" I have found.

Fix 1 is from Kenwood themselves, per the following quote:

"First try replacing the batteries if you haven't already. If that doesn't help, try resetting the receiver. Simply unplug the receiver, then press and hold the power button on the receiver while you plug it back in. Turn the unit on, and the display should say 87.50 to confirm the reset. If the remote still does not work, use a digital camera as an eye, face it towards the IR of the remote control. Depress any of the remotes buttons; you should see IR flash each time a button is pressed. If not then the problem is with the remote. If the remote works fine, then the problem is with the receiver. In order to determine the cause of the problem, I suggest you take the defective unit to a Kenwood authorized service center for evaluation. You can find information for authorized service centers in your area by visiting our website at www.kenwoodusa.com."

The second fix involves some very simple soldering, and has been endorsed by many as the solution:

http://www.remotecentral.com/cgi-bin/mboard/rc-theater/thread.cgi?3016%2C3

I hope this helps. Good luck and please let me know if this solves your problem!

Bob

Aug 29, 2008 | Kenwood VR-407 Receiver

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top The Computers & Internet Experts

tim brauer
tim brauer

Level 2 Expert

103 Answers

Dilum Senarath
Dilum Senarath

Level 2 Expert

161 Answers

Are you a The Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...