Question about Garden

Open Question

Fordson new performance head require the valve protrusion figure tractor july 1963

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22095 Answers

SOURCE: where do you put hydrolic fluid on a fifty's fordson dexta tractor

what hydraulic fluid are you trying to add gearbox of the lifting gear ?? if the lifting gear i think its under the engine cover but its been 40 yrs since i done one

Posted on Nov 23, 2011

BAMOUT
  • 2475 Answers

SOURCE: need parts diagram for lucas starter model 6072k-6-57 of 60ties fordson tractor

try this 22c2be17-7495-41d5-8288-10122234b589.jpg

Posted on Jan 26, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Piston clearens between head on navara 2.5 tdci


The figure you are asking for isn't generally included in the data and much depends on the engine design and the sort of work you are carrying out.
Mostly the specs for the block and pistons and cylinder head are given separately and if they are adhered to the piston to valve clearance is never an issue.

Mostly diesel engine pistons are graded for height so the correct protrusion above the cylinder block face can be adjusted. With a wet-linered engine the liner is adjusted by inserting shims to also have a small protrusion above the block face.

After machining the face of a cylinder head the height of the valves above or below the head face should be checked against specs and will often require lowering by cutting the valves seats further into the head.

Engines that do not use height graded pistons tend to use a selective thickness head gasket.

I am on the wrong computer to offer you any specs but any good data book or repair manual will provide them.

Jun 17, 2016 | 2007 Nissan Navara 2.5

1 Answer

What year is my ih 706?


I think they were made from 1963 to 1967. Yours was made between '64 an '65.

Jul 02, 2015 | Farmall IH Tractor 706, 756, 806, 856,...

1 Answer

Do you have a wiring diagram for fordson major with alternator


Hi.... Try a company called Wirksworth Tractors they are based in Derbyshire and very helpful ..... Wish you luck

Mar 16, 2015 | Garden

2 Answers

Electric wiring diagram 4 a fordson dexta


Go to www.fordson.dextr.de If you can get sec. 9 and 10. Is electrical. Rest is whole manual. It free.

Jan 31, 2012 | Garden

1 Answer

Where do you put hydrolic fluid on a fifty's fordson dexta tractor


what hydraulic fluid are you trying to add gearbox of the lifting gear ?? if the lifting gear i think its under the engine cover but its been 40 yrs since i done one

Nov 23, 2011 | Cars & Trucks

1 Answer

My tractor dies randomly. it just bogs out, and dies. it might start right up or it might take awhile. I replaced the coil, fuel filter and made sure the carb was clean.


Craftsman 17.5 hp 42 in. Deck Lawn Tractor model 917.272670 ohv, 0 compression, removed head found valve seat insert out/on angle, valve unable to close. Can this be re-seated, adjusteded or is new head required? Rich

Aug 08, 2010 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

Not finding what you are looking for?
Garden Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

10897 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...