Question about Baby Lock Sewing Machines

Open Question

After calibrating touch screen on esante baby lock will not work

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Baby Lock Esanti ESI-2

You might want to try this solution first, although maybe your dealer has already tried it. With your machine off, hold the start/stop button, the reverse button and the needle position button down with one hand. While holding them, turn the machine on. What will come up is a screen to recalibrate your LCD. You won't need the first screen, so press the thread cutting button one time. The next screen changes the brightness level. The reverse button on your machine makes it darker, and the needle position button makes it lighter. I stumbled upon this by accident one day while recalibrating. I'd like to know if this works for you, although by now, maybe you have bought a new screen...

Posted on Mar 15, 2008

  • 2 Answers

SOURCE: won't work at all-esante ese baby lock

Check that the button used to snip your thread at the end of your seam is not stuck. Mine will sometimes stick and if I just touch it again it will again activate and the red start/stop button will work again.

Posted on Nov 11, 2009

  • 1116 Answers

SOURCE: dim screen

Refer to the manual for the adjustment. If the adjustment does not work, the machine will have to go into the shop.

Posted on Mar 14, 2010

nevaellegant
  • 2 Answers

SOURCE: My needle threader on my

Is it not coming down to the needle or is it just not going through the eye of the needle? My mother bent her's once and I have to adjust the position of the needle just right to get mine to work. There is also a chance that the little hook itself has been bent or even broke. It's so small that it can be hard to see. My grandmother broke her's after several years. She couldn't figure out why it stopped working and took her "baby" to get a "check up". They told her that the hook had broken just enough to not hook the thread.
If you bought it from a baby lock dealer there is a life time warranty on it. If not it shouldn't cost much to have serviced.
Hope this helps.

Posted on Feb 16, 2011

bargainbox
  • 1388 Answers

SOURCE: Need LCD screen for Baby lock esante sewing

When your BabyLock Esante ESi2 is otherwise working fine but the LCD display screen begins to grow darker and you find you just can't read it, the only thing you can do is replace the BabyLock Esante ESi2 LCD screen, or buy a new machine. BabyLock no longer stock this item direct, but there is an affordable replacement available....Check this Link

Posted on Dec 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Flashing Display, Won't Connect to Computer.


I have not yet seen babylock release a driver for windows 8 and the BLN. The dealer likely has a computer with an older operating system.

Jun 09, 2015 | Baby Lock Esante

1 Answer

I cant remember how to recalibrate my baby lock esante ESe.I found the answer before but didn't write it down.Now it is out of calibration again and I can not find how to do it. Please someone help. I


Turn off machine. Hold in the 3 buttons above the needle. Turn machine on. Voila in screen calibration mode. Using touchpen carefully touch numbers 1-5 in order. repeat until you hear beeps. turn off machine. restart and your good to go.

Oct 01, 2014 | Sewing Machines

1 Answer

Letter characters won't change


You need to re-calibrate the touch screen. It is in the settings menu to reset touch screen. Done.
Cheers,
Embroidery Services
San Diego, CA

Sep 24, 2014 | Baby Lock Esante

2 Answers

Touch screen


the machine should be checked to see if there is something wrong with the motherboard.

Sep 03, 2013 | Baby Lock Esante

1 Answer

Dim screen on baby lock esante sewing machine


Refer to the manual for the adjustment. If the adjustment does not work, the machine will have to go into the shop.

Mar 14, 2010 | Baby Lock Esante

1 Answer

Won't work at all-esante ese baby lock


Check that the button used to snip your thread at the end of your seam is not stuck. Mine will sometimes stick and if I just touch it again it will again activate and the red start/stop button will work again.

Apr 08, 2009 | Baby Lock Esante

2 Answers

Touch screen very light


I selected the basic operation, adjustment, then brightness of lcd.

Nov 15, 2008 | Baby Lock Esante

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...