Question about Garden

1 Answer

Gas weed eater pull cord wont retract after pulling cord

''gas weed trimmer pull cord will not go back into case Homelite model ut15151''

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Remove the cover and the screw holding the recoil down, turning the pulley ccw should release the spring then wind rope around pulley and (hopefully yours has the slot in it) wind in the direction of the pulley teeth then, holding rope in slot put back on spring and wind cw till almost tight, and install screw. Usually you can do this without taking rope handle off. sometimes you have to remove handle. look at spring end in the middle and make sure its not broke as long as you have it apart. Its a easy fix.
Thanks for using fixya

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Weed eater made a noise then just quit working, pull cord wont engage


hello sir, Please provide the following information so that your issue may be diagnosed properly,what is it? brand name,complete model number The problem, What is happening with what? When it is happening? Are there times it does not happen? Did it just start happening? Did it ever work ? Did any seemingly unrelated event coincide with whatever it is not working? need the model number and brand name, if you need a manual i need the brand name and model number,if it is a riding mower the model number is under the seat.a snow blower the model number is on the rear of the machine, let me know,thank you. ~~ i need to know this before i can give you a answer,,

Jan 23, 2012 | Poulan/Weed Eater No. Te475 952711797 17"...

1 Answer

My Poulan Pro 150E pull cord will not engage to start the weed eater. The rope comes out adn retracts back with no problem, but there is no pressure on the clutch to cause the motor to start. There is...


Sounds like the starter dogs are broken. They are little plastic teeth that engage to turn the engine when you pull the cord. You'll need to replace the whole starter assembly to fix this.

Aug 26, 2011 | Poulan/Weed Eater No. Te475 952711797 17"...

1 Answer

What is the gas to oil ratio for weed eaters?


Most gas weed eaters use 2-cycle engines. For the Homelite 2-cycle engine trimmers, use a 50:1 ratio of gasoline to the Homelite lubricant. (For 1 gallon of gas, add 2.6 oz of the oil.)

Many Homelite tool manuals are available here: http://www.homelite.com/service_support/product_owners_manuals . Scroll down to find your string trimmer.

I hope this helps.

Cindy Wells

Jul 16, 2011 | Homelite Garden

1 Answer

Pull cord wont engage on weed eater


remove the cover and check to see if any of the plastic or nylon parts in the rewind mechanism are cracked or broken or if there is dirt in the re-wind pawls...clean and lightly oil, should work if not broken.

Jul 06, 2010 | Homelite Garden

2 Answers

Repalce the pull cord a Craftsman Weed eater 32CC


I have a craftman weed eater model M358.796600 and the pull cord will not retract any more...how do you fix it?
Drew

Jul 02, 2009 | Craftsman 25cc Gas Line Trimmer

1 Answer

Weed eater wont start,put straight gas in it.


if you didn't mix any oil with the fuel,you probally burnt the piston and cylinder up.the only to find out if you did is to pull the muffler off and look inside the cylinder and see if there are any scoring on the piston.if there is you need to replace the piston and cylinder assembly.most cost $100.00 or more.usually they are not worth repairing.i know this is not good news but i hope this helped,let me know.................

Jun 02, 2009 | Homelite Consumer Products 4.0 Amp, 13 In....

1 Answer

Pull Cord won't pull on model TB525CS


Hi try this web site its called pats small engines shows exploded view

Jun 02, 2009 | Troy Bilt Tb70ss Gas Trimmer

Not finding what you are looking for?
Garden Logo

Related Topics:

1,509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

john h

Level 3 Expert

12104 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...