Question about Refrigerators
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have the same model. This has happened to me several times (usually when the door was kept ajar without notice).
Simply open the door, take a common hairdryer and blow at high speed (hottest also) all around the area of where you can feel the ice in the tray, but hasn't dumped yet. It will usually take about 5-8 minutes of consistently moving back and forth around that area. What has happened is the lines bringing water to the trays have frozen over. When you "thaw" them out, the ice made will dump in about 45 minutes. When you hear the ice fall, you will know it's in working order again. I have NOT heard this is a "flawed" icemaker, only that it is hypersensitive to freezing lines when a door is left ajar. In your case, to prevent this from happening again. If you shut the icemaker off again, make SURE you turn off the source of the water feed BEFORE you turn off the ice maker. By doing this, the lines will empty as it makes it's last tray of water. Try that - very confident it will fix your problem!
Posted on Jun 05, 2010
SOURCE: I have a whirlpool and
i think you damaged the icemaker l to v is line voltage to valve . . only connection to be used with jumper is t to h this will run the motor till its started the harvest then pull wire and let it run on its on this will start the mold heater and run the drive motor and when it has almost completed the cycle it will call for water from the valve . / you need a new ice maker anyway . so just replace it and you''ll have ice i a couple of hours .. mm
Posted on Jul 30, 2010
Testimonial: "Great! I will start there. I read somewhere else to jump L and V. I will be sure not to do this in the future. Hope I didn't short valve too. Thanks!"
Tips for a great answer:
on Jul 17, 2010 | Ice Cream Makers
Replacement parts can be
purchased at any of the following web sites:
Before going to buy any parts
Go through this troubleshooting help links.
This is list of refrigerator problems,
which is normally faced in refrigerator.
You can go through the details, by clicking the link below:---
Refrigerator is not cooling properly?
Both refrigerator and freezer not cooling properly in refrigerator?
The ice maker not working: ---
Compressor not running on refrigerator?
Water dispenser not working on refrigerator?
These will help.
Dec 23, 2012 | Amana ARB2214C Bottom Freezer Refrigerator
Jun 24, 2011 | Kenmore Refrigerators
Mar 30, 2011 | Refrigerators
Dec 01, 2010 | Maytag Refrigerator Icemaker Ice Maker...
Mar 03, 2010 | Whirlpool ED2FHEXN Side by Side...
Sep 15, 2009 | Aroma AIC204EM 4 Quart Ice Cream Maker
Jul 13, 2009 | Sunpentown SPT IM-100 Portable Ice Maker,...
Apr 22, 2009 | Whirlpool Gold White-on-White 21.9 cu. ft....
Aug 17, 2017 | Gaggenau Refrigerators
33 people viewed this question
Usually answered in minutes!