Question about Grampus Optics
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: upside down images
ALL telescopes will show the image upside-down. You learn to adjust for this. IF you must, they do make a lens called an "erecting lens" that would flip the image back right-side up.
Posted on Dec 28, 2008
In a refractor images are upside down as with most telescopes. You need an image erector to create a normal correct R and L and Up and Down image. It is a lens which goes in front of the eyepiece to give a correct image.
Posted on Jun 02, 2009
You are NOT focused properly. Put the eyepiece with the largest number written on it into the focuser. DO NOT use the 2x barlow if you have one.
Go outside during the daytime and practice focusing on a distant object. Turn the focus knob back and forth slowly until the image is in sharp focus.
Posted on Jun 02, 2010
Testimonial: "thank you for you'r responce but is there ane chance u could tell me where i would get the eyepieces from please as there was no eyepieces with the telescope when it was given to me thank you very mutch paul "
hssross if your still out there I have the telescope you have I bought it new a long time ago. I have used it with my grandkids now I have all the parts so I can answer your questions to the best of my knoladge. firstname.lastname@example.org
Posted on Sep 23, 2010
Tips for a great answer:
Jun 26, 2011 | Tasco 49114500 Spacestation(r) 114mm...
Nov 28, 2010 | Grampus 90114C (675 x 114mm) Telescope
Sep 25, 2010 | Tasco Astronomical Refractor Telescope
Aug 02, 2010 | Grampus 90114C (675 x 114mm) Telescope
Jan 12, 2010 | Bushnell NorthStar 78-8846 (675 x 114mm)...
Mar 07, 2009 | Fieldvision 114mm Reflector (114 x 114mm)...
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: