Computers & Internet Logo

Related Topics:

C
Clifford Mullett Posted on May 08, 2017

I don't see your charger in Decatur it just looks like the pad lights up when I plug it in and when I unplug it it goes off

1 Related Answer

Anonymous

  • 2517 Answers
  • Posted on Feb 15, 2010

SOURCE: my acer ASpire 2920z mouse pad freezes when I plug

Hi there, please hit FN+F7 key at a time for unlocking the key pad. After that, If its not working then follow the below instruction.
A)
1. Restart the PC and repeatedly hit F8 until you have a menu in front of you.

c1fdd55.jpg 2. You will find few option there. Just select these mention option " Last know good Configuration ...." use by your up/down arrow on your keyboard.
3. Press enter there.
4. your will see the system asking you for which OS you want to use. If you have only one OS then just press ENTER there or select the OS and Enter.

If not working then try these step.

B)
Uninstall the mouse driver from the device manager.(Right click on My Computer then select manager. A window will open , there you will see device manager. Now select the mouse, then select the mouse device. uninstall from there.) Now restart the laptop. When you see all the icon is ready for work, then put your driver installer DVD & run the driver set up. When its finish, restart your laptop again. Your mouse will be ready for work again.
After these, if you again face the same problem then format the OS & install it again.Thanks & waiting for your feedback.
Thanks & waiting for your feedback.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why can't I turn on my Jabra sport after charging?

Could be. No battery has a lifetime forever. But perhaps you did not unplug it correct?
Try plugging it in and look if any light goes on when plugged in on the charger. You don't need it on the charger for a long time. Then unplug it an try to start it again. also check if all contacts on the Jabra and on the charge cable are clean and nothing can block the current.
1helpful
2answers

HOW DO I CHARGE THE BATTERY ?

In the hood of the jeep there is the battery. The jeep should of came with a plug-in quick charger that fits in a general outlet. Simply unplug the battery, and plug it into your wall in the house, etc.
2helpful
1answer

I'm borrowing a Jet 3 Ultra from the local Am. Legion for my Mom to use. They know nothing about it except they were told it had a new battery. I plug it in and all the LED's light up with the...

The batteries need charging and when you plug in the charger and the power is on the lights wil flash indicating that the charger is plugged in. Now look at the rear of the chair near where the charger cord plugs into the chair and you should see a voltmeter. With the charger plugged in the voltmeter will indicate about 5-6 amps and after charging overnight the voltmeter should be reading 0 amps. If when you plug in the charger cord and the voltmeter indicates 0 amps then I would suspect that the charger is not working or that the fuse is blown in the charger circuit. The only way to see if the batteries charge would be to borrow or find an offboard charger that will plug into the charger port located under the front of the joystick and after charging for 10-12 hours see if the battery level lights show full charge Hope this helps
2helpful
1answer

When iplug my charger in my car the picture disappears but you can hear it when i unplug it the picture comes back

I believe what is happening, is there is a short internally in the unit where the 12 volt connection plugs in. If you plug it in goes out, then unplug it goes back lit, then there is a short, Here is a couple things to try, to confirm area of problem. Take your unit, and try plugging it in another car, if does the same thing, then it your unit most likely, or could be your 12 volt charger. Here is last test to confirm. Yes it is possible it could be the charger it self. Try picking up a new charger, save receipt , so can take back, try new charger with unit and plug back in your car. This way you have now determined if it unit, charger or car 12 volt female in. Please if this has helped you, please don't forget to give me the thumbs up to help me and others. Thanks, mike from fixya
Jun 17, 2011 • Garmin GPS
0helpful
1answer

I bought a psyclone essentials Wii charge station with 2 batteries PX6522. However, when I lay the batteries down on the inductive charging pad, nothing lights up (not the red for charging or green for...

I know this is an old post, and you likely don't need the answer anymore, but It appears that the programming in the induction pad can get screwed up and it won't actually detect that the batteries are there. By unplugging the station and leaving it unplugged for a bit, then plugging it back in you can normally reset the pad and get it to detect (and charge) the batteries again.
0helpful
1answer

When I plug the 12 volt charger in the lighter the green light goes on. When I plug the Maestro 4040 into the charger the green light goes off and the unit won't power up. I checked the power port and I am...

hey mousehunter, you say you have continuity, did you mean voltage..looking at your 4040 with the back off and screen face down (you probably know this already..sorry if you do) the power port should be on the lower left corner...open it back up and the contact at the top left is a ground as is the lower left corner, the lower right is a ground and the top right is the poss.....this is very common for these ports to fail

Does it look like the port has been replaced, or do you know if it was...normally this happens because of excessive heat from trying to solder a new port on it.


1st i would try a home charger to rule out the charger. (you can check if its working by going in the power options and looking at the power meter and see if its moving, assuming you can still turn it on)


if its totally dead, try this...remove the cover again and disconnect the battery, then press and hold the power button for 1 minute....with the battery unplugged, plug in a known good charger and press and hold the power button for up to ten seconds and see if it starts.

let me know what you find.


bill
687791a.gif
Not finding what you are looking for?

46 views

Ask a Question

Usually answered in minutes!

Top The Computers & Internet Experts

Alexander

Level 2 Expert

171 Answers

nexrad_chris

Level 2 Expert

177 Answers

vince

Level 3 Expert

2530 Answers

Are you a The Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...