Question about Kenmore Dishwashers

Open Question

I am getting an Error code E27 on my kenmore 630 dishwasher . What does that mean.

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 78010 Answers

SOURCE: I would like to find out what error codes

E26 - Shorted Throttle Switch Circuit
E27 - Open circuit in throttle switch
On these 2 codes replace the TPS and clear codes (throttle position sensor).
E52 PCM/ECM Memory Reset
Have u cleared the memory? don't worry about this code.

Posted on Apr 08, 2009

  • 11 Answers

SOURCE: I am getting error code E27 on Pixma MP210. What

try this:

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bosch dishwasher error code e27. Any solution?

please go here on pc, this tells you how to reset bosch dish washer. This tells in full detail. God-Bless you all!

May 20, 2016 | Bosch Dishwashers

1 Answer

Kid 60 s10 please give fault codes

Hi Roger, Hope this helps......CHEERS..


Kenmore Dishwasher Error Code = Start Resume light blinking slow
When the dishwasher door opens or electrical power is removed during the cycle then the dishwasher will not start again. The door is detected as being closed and the Start Resume button is being pressed
Kenmore Dishwasher Error Code = Clean light is blinking 7 times
Heater circuit fail. Control panel did not detect the water getting hot. Did not detect heating element was energized to heat the water during the wash cycle
Kenmore Dishwasher Error Code = Sanitize LED blinking at end of cycle
Control panel could not detect if sanitation has been achieved
Kenmore Dishwasher Error Code = Console light blinking rapidly
There is a stuck button on the control panel
Kenmore Dishwasher Error Code = Clean light is constantly illuminated
Dishwasher cannot start a wash cycle until it sees that the door has been opened after the previous washing cycle
Kenmore Dishwasher Error Code = Control lock LED is ON but not responding to pressing of the keys
Turned on by accident or there is a control detected key pad problem

Mar 31, 2016 | Kenmore Dishwashers

1 Answer

What does code F2E2 mean on the display

My Kenmore Elite dishwasher is showing code F2E2..What ... > Agafia Reutov > Questions
The F2E2 error can be frustrating. The problem is the User Interface is not communicating with the main control board. This error is mainly caused by a poor ...

Kenmore elite service code f2e2 ' ShopYourWay > Manage My Life > Questions
Te hose came off the bottom of the washer, then I got the service code f2e2. ... I have a kenmore elite dishwasher model 665.1396 ERROR CODE F2E2 ?

Oct 22, 2015 | Dishwashers

1 Answer

Kenmore elite dishwasher model 630 Smart Wash light is flashing

You may want to try:
Press a series of four buttons in quick succession. Press "Heated Dry," "Normal Wash," "Heated Dry" and "Normal Wash" to instruct your Kenmore dishwasher to run a short diagnostic test.
Wait for two minutes while your Kenmore dishwasher runs its diagnostic test.
Press the "Cancel/Drain" button once your dishwasher has completed its diagnostic test. This should reset your dishwasher control panel.
Check to make sure that there's no standing water in the bottom of your dishwasher. Standing water in your dishwasher may indicate that your dishwasher has stopped mid-cycle. You will need to press the "Cancel/Drain" button before you can reset your dishwasher control panel.

Dec 18, 2013 | Dishwashers

1 Answer

Error message E27 appears and washer won't operate.

E27 means there is a problem with the door lock. Unplug the machine for 5 minutes and try again. If the error code returns you will need to replace the door lock assembly.

If you have anymore questions please comment me back.

Jul 28, 2011 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer


Canon error e27 ink absorber full/reset process

printer powered off but connected on power source , you must:
1. Press & hold stop/reset button, and then press & hold [ON/OFF] button.

2. When Green power lit, leave stop/reset button & press twice stop/reset (see orange indicator).
3. Leave On/Off button. Printer in actually service mode.
4. Press stop/reset 4 times (see orange indicator) if not blink restart above process from top.
5. After press stop/reset 4 times successful press On/Off button 3 times. printer will off.
6. Press On/Off button.

May 13, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

I would like to find out what error codes e26 e27 e52 mean on service soon of 1986 Cadillac Deville

E26 - Shorted Throttle Switch Circuit
E27 - Open circuit in throttle switch
On these 2 codes replace the TPS and clear codes (throttle position sensor).
E52 PCM/ECM Memory Reset
Have u cleared the memory? don't worry about this code.

Apr 08, 2009 | 1987 Cadillac DeVille

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers


Level 3 Expert

1175 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides