Question about Office Equipment & Supplies

Ad

Hi,

A 6ya expert can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: How do I get my calculator to round to the fourth

Hello

[Shift][Setup][6:Fix]4 displays result with 4 decimal places. But if number is too small you will lose significant digits and may have a null value.

In that case you use [Shift][Setup][7:Sci]4 displays results in scientific notation digit.4digitsx10^(exponent)

Hope it helps

Posted on Sep 12, 2009

Ad

SOURCE: oops

Hi,

You need to change the display format.

Press the [MODE] key a certain number of times until the screen
displays** Fix, Sci, Norm **on one line, and **1 2 3 **on the next line, with 1
under Fix, 2 under Sci and 3 under Norm.

Press 1 (Fix) followed by a number (1,2,3, etc.) This second number
will set the number of decimal digits. In other words, if you press 1
(Fix) 3 all your results will have 3 decimal digits. If you choose 0,
your results will not show decimals.

Hope it helps.

Thank you for rating the solution.

Posted on Dec 06, 2009

SOURCE: change decimal placement on calculator

pressing the tab button displays the number of decimal places 0, 2, 3, 4, A, F on the bottom of the screen.

Posted on Aug 06, 2010

SOURCE: MY TI nspire always rounds

Turn it on, hit MODE then change the FLOAT value from 1 to Float itself. Float allows you to round, and something changed that setting

Posted on Dec 02, 2010

SOURCE: My SHARP EL-501W scientific

press 2nd F the F<-->E, then the number of places (1-9) that youd like to be shown in calculations. fixed mine :)

Posted on Sep 15, 2011

9 miles

15839 = 8.999431818 miles

1 yard = 0.000568181818182 miles

This really comes down to how you round up and what number of decimal places you round at . at two decimal place you could look at it as equal .

8.999 >> rounded to two decimal places = 9 miles

also is a mile the same number of yards in each country ?

15839 = 8.999431818 miles

1 yard = 0.000568181818182 miles

This really comes down to how you round up and what number of decimal places you round at . at two decimal place you could look at it as equal .

8.999 >> rounded to two decimal places = 9 miles

also is a mile the same number of yards in each country ?

Jan 26, 2018 | Office Equipment & Supplies

Huh?

To round off a number to 2 decimal places.... you would have to have a decimal. Your number of 3,150,000 implies 3,150,000.00

There is no rounding in this case. It is simply adding a decimal and two zeros after the decimal.

Semper Fi,

Z

To round off a number to 2 decimal places.... you would have to have a decimal. Your number of 3,150,000 implies 3,150,000.00

There is no rounding in this case. It is simply adding a decimal and two zeros after the decimal.

Semper Fi,

Z

Jun 13, 2017 | Office Equipment & Supplies

You haven't made the purpose of the question very clear Miriam so I am only guessing that it is an exercise in rounding or shortening decimal fractions to make them easier to work with which is often convenient when approximations do not matter.

The general rule of rounding is to take the last figure and if it is less than 5 it is erased and if it is 5 or more it is erased but 1 is added to the next or the new last figure and the process is repeated until the fraction is shortened to the required length.

If you take the decimal fraction 0.8745, after the first stage of rounding it would become 0.875 and then after the second stage of rounding it would become 0.88 and then finally rounding to one decimal place the result would be 0.9.

I hope this helps you deal with your fraction. I apologise in advance if I have misunderstood the question.

The general rule of rounding is to take the last figure and if it is less than 5 it is erased and if it is 5 or more it is erased but 1 is added to the next or the new last figure and the process is repeated until the fraction is shortened to the required length.

If you take the decimal fraction 0.8745, after the first stage of rounding it would become 0.875 and then after the second stage of rounding it would become 0.88 and then finally rounding to one decimal place the result would be 0.9.

I hope this helps you deal with your fraction. I apologise in advance if I have misunderstood the question.

Mar 01, 2015 | Office Equipment & Supplies

You round a number with several decimal places to a number with fewer decimal places.

1.14 rounded to 1 decimal place 1.1

What you are asking for can be done by putting a zero after 4 and write 1.140, BUT that is not rounding. In fact you can put as many zeros after 4 as you want.

1.14 rounded to 1 decimal place 1.1

What you are asking for can be done by putting a zero after 4 and write 1.140, BUT that is not rounding. In fact you can put as many zeros after 4 as you want.

Feb 24, 2014 | Mathsoft Computers & Internet

Set the display to 2 decimal places then use the [RND] function. See how the manual describes the Round operation.

Brief example:

01- 42 2 [f][2]

02- 42 14 [f][RND]

03- 42 9 [f][9]

The above program takes the number displayed and rounds to 2 decimal places (nearest 100th), then displays all decimal places.

If you entered 2.876 and ran the program, it would display 2.880000000.

Brief example:

01- 42 2 [f][2]

02- 42 14 [f][RND]

03- 42 9 [f][9]

The above program takes the number displayed and rounds to 2 decimal places (nearest 100th), then displays all decimal places.

If you entered 2.876 and ran the program, it would display 2.880000000.

Jan 24, 2014 | HP 12c Calculator

CUT: Values are cut off to the number of decimal places speicified by the current Decimal Place Selector setting

UP: Values are rounded up to the number of decimal places speicified by the current Decimal Place Selector setting

5/4: Values are rounded off (0,1,2,3,4 are cut off; 5,6,7,8,9 are rounded up) to the number of decimal places speicified by the current Decimal Place Selector setting

UP: Values are rounded up to the number of decimal places speicified by the current Decimal Place Selector setting

5/4: Values are rounded off (0,1,2,3,4 are cut off; 5,6,7,8,9 are rounded up) to the number of decimal places speicified by the current Decimal Place Selector setting

May 04, 2011 | Corporate Express CEB95005 Calculator

Do you mean four places behind the decimal point? Page 21 describes setting for fixed decimal point 0 thru 9 places to the right.

http://education.ti.com/downloads/guidebooks/graphing/83p/83m$book-eng.pdf

http://education.ti.com/downloads/guidebooks/graphing/83p/83m$book-eng.pdf

Nov 24, 2009 | Texas Instruments TI-83 Plus Calculator

The function is called ROUND. It has 2 arguments, (1) the original number and (2) the number of decimal digits. Here is the Excel's help:
ROUND(number,num_digits)
The number you want to round.
• None.
num_digits The number of digits to which you want to round number.
• If num_digits is greater than 0 (zero), then number is rounded to the specified number of decimal places.
• If num_digits is 0, then number is rounded to the nearest integer.
• If num_digits is less than 0, then number is rounded to the left of the decimal point.

So for your case use this in a cell "=ROUND(12350*32.75%, 0)" without quotes, where I assume one or both numbers will come from other cells. -Ken

So for your case use this in a cell "=ROUND(12350*32.75%, 0)" without quotes, where I assume one or both numbers will come from other cells. -Ken

Aug 29, 2009 | Microsoft Office Excel 2007

24 people viewed this question

Usually answered in minutes!

×