Question about Kenwood Car Audio & Video
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is the solution:
Their is a chrysler amplifier some where in your pacifica.In order for your signal to reach the speakers you need to buy a box (from bestbuy install ,or any car stereo install place)that allows the signal to "pass thru"to the speakers.
Posted on Jul 27, 2008
I had the same problem and here's what fixed it. By default, I did not connect the blue/white striped remote wire to the harness. Apparently there is an amp somewhere in the vehicle I did not know about. After looking at the factory wiring and the aftermarket harness, I noticed that the remote wire was used and I connected it with the remote wire on the harness and everything came up and worked perfect.
Posted on Dec 02, 2008
There is 2 harness the one that you are usin wich is the main harness in the second one that normally is conected to power up tha casette deck,there it should be a pink wire conect this wire together with the red one located on the main harness,if you have any problem call me 830 488 2078 im in texas ask for Tony
Posted on Mar 14, 2009
Hi, had total issues with this too! Your back speakers arent going because they are amped by the factory amp in the boot. You have to provide power to the amp so that it will turn the rear speakers on. This was a white and black striped wire in my car (Audi A3 1997) The rear speakers are blue /green and brown/red (left rear) , and the LH rear is brown/red and (forgotten colour) but the wire on the bottom left under those two brown/red wires on the 20pin harness. If you wire it all up like this then your rears should be going :)
Posted on Apr 28, 2009
Testimonial: "So sorry for the very long delay in replying to your advice. It was the sub/amp in the boot as you correctly guessed. Another £200! Many thanks Pal"
Hi there check out my website we have radio diagrams for your vehicle goto http://valueshop.noads.biz/contents/en-us/d180.html and select you model. hope this helps
Posted on Jul 05, 2010
Tips for a great answer:
Jan 06, 2016 | Kenwood Car Audio & Video
Aug 23, 2017 | 1998 Chrysler Town & Country
Aug 28, 2011 | Car Audio & Video
Jan 01, 2011 | Jeep Car Audio & Video
May 16, 2010 | Kenwood KDC-122 CD Player
Mar 13, 2009 | Car Audio & Video
Feb 10, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player
Jul 11, 2008 | JVC KD-G110 CD Player
Jan 26, 2008 | Kenwood KDC-X717 CD Player
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: