A third of the screen has gone blue on the NEC Versa M340. the text underneath seems to be working and the mouse goes under the blue bit but i just can't see anything...

http://download.cnet.com/nec-versa-notebooks-fast/3000-2110_4-80239.html

http://download.cnet.com/nec-versa-notebooks-fast/3000-2110_4-80240.html

these drivers are found at
http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for
eg: nec versa m340 drivers
you might have to try a few times to get it right

hope this helps

HI, If you are getting a blue screen on the computer, it might be caused by 2 types of problems:

1. It might be a Hardware issue, video card, sound card, memory, or hard disc drive.
2. IT might be a software issue, a program like any antivirus, or office or other third party software that is causing this.

Have a technician check your computer for any issue. Thank you for using Fixya, your recommendation is highly appreciated for the free support.

Hi,

First off that notebook is not Windows 7 capable. Here are the WIndows 7 requirements:

• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
  
• 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
  
• 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
  
• DirectX 9 graphics device with WDDM 1.0 or higher driver.
  

But, if you want to add a PCMCIA Sound Card you can do that. Just google PCMCIA Sound Card and you'll find a ton that are available.
I might suggest a new laptop.

Thanks Mark

First you need to take the cover off your laptop and locate the cmos battery which looks like an oversize battery watch. With everything unplugged it just pulls out, note which side of the battery goes however. Place the new one in put everything back together and power the computer up. When it powers up it will finally get to the screen that says press "F1" for setup or "F2" to continue. Press F1 and you will get to your set up screen. You can go through each screen and select F5 which is the default factory settings or scoll across the top to the last screen which will give you the option of resetting all the settings to factory default with just pressing one of the F keys once only. Once you do that, just shutdown your computer and restart and it will start as normal. It may go through the F1 and F2 screen one more time but just press F2 and continue. After you log off the next time all your changes should be good. Let me know if I can help you in any other way.

so you need to replace rtc to remove password or reset bios yeah...
send me your email and I'll give you link to download iso for bootdisk program to do just that..
you download software (I provide) unpack it (winrar) and write to cd,then use the cd to remove passwords and rest bios and a whole lot more

i)RAM might gone bad.............check replacing RAM 

Thanking you

M. Sridhar

is it the bluetooth function for NEC versa E6300 for mouse only?

connect the internet
open google search engine
and search the driver by writing
" download driver (nec versa fm340)

http://www.nec-computers.com/support/main.asp

choose
notebook/pda
versa
versa mainstream(veras M)
m340/Fm340