Question about Linksys WPSM54G Print Server

1 Answer

Print Server disconnects for no reason

Print Server works fine for a while then disconnects for no obvious reason - reboot router and it works fine again.

Posted by on

  • supplier529 Jul 25, 2009

    Many thanks - will try.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Hi it is the problem called intermittent rebooting. Plz chk the firmware of the printserver and reconifgure it by downloading the latest firmware from the linksys website.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot access http://192.168.0.1 in order to configure wep security as my network is unlocked


Open a command prompt, type "IPCONFIG", and look for the Gateway or the DHCP server. It may be different than 192.168.0.1, like 192.168.1.1, or 192.168.0.2, or even 10.0.0.1

Jan 23, 2010 | NetGear DG834G Router

1 Answer

I had a PS101 hooked up to an older wireless router. It was working fine on my new Vista Machine. The router died and just installed a NETGEAR WGR614 Wireless Router 802.11g. Now it doesnt see the print...


This was more hastle than it was worth. So I bought a new print server (twice), neither worked either. Might be the router, but after spending 2 hours on the phone with INDIA, I said forget it and took it back, bought a parallel card and gonna hook it up with a cable!

Jan 01, 2010 | NetGear PS101 Mini Print Server Print...

3 Answers

How do I connect with my WGPS606 if there is no setup cd and the default ip does not work? My router has encryption and the WGPS needs the info.


you need to set your print server for dhcp, you need to log in and verify the settings OR just set it back to default because dhcp is default. gl

Nov 06, 2009 | NetGear WGPS606 (WGPS606NAR) Print Server

1 Answer

Failed response from plugin device


Dirty fix...
When the printer errors out...stop, unplug the power to the printserver. Reset the printer, Clear the print que (delete jobs/restart print spooling service), restart the printserver software and plug the printserver power back in. Wait for the re-detect. Everthing should be good at this point. Unfortunatly the print job will be lost and you need to print again...BUT, NO REBOOT yea!!!
Note... for me, if this sequence is not followed, I will have to reboot. The printserver will be locked for the PC that was trying to print. All other PC's will be fine, and I have no idea why.
Good luck,
Bill

Jun 24, 2009 | Zonet MULTI FUNCTN USB 2.0 PRNT SRVR...

2 Answers

Can't connect a Dlink 1260 Print server through my Linksys wireless G router


A couple of things to check for:

  • If the wireless network is encrypted on your router verify that you have the right encryption key programmed on the print server
  • You are connecting to the corret router (Verify the SSID of the network - SSID being the networks name)
  • Make sure you are in an acceptable range , not 500 feet away from the router
  • Verify that the print server has a connection to the printers connected to it
  • Try rebooting all of the equipment (router , server, printers)

Oct 02, 2008 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

Problem with DPR-1260


this kind of problem occurs in dlink router sometimes & after some time router stop responding after 10 -15 min & once u reboot the router it again start work for a while. the best solution to this problem is to reset the router back to its factory defualt settings u can do this by press the reset button on the back on the router ( it looks like a small hole u have to use a pin for press that button) once u have reset the router to factory default settings just reconfig the router & i am sure it will start working fine in case u still face the same problem just contact D-link or send me the details about the problem & the physical setup of ur router & printer etc

Sep 28, 2008 | D-Link DPR1260 Rangebooster G...

1 Answer

Cannot connect to AXIS 5600 print server


A Dlink's default IP range is 192.168.0.x, it would therefore hand out a address in that range. Since the router reports an IP of 10.43.14.125 I believe that it has been assigned a static IP Address. This is the manual.
https://www.axis.com/files/manuals/28049.pdf
You need to temporarily assign your computer an IP of 10.43.14.1
follow the instructions here
How to Assign Static IP Address in Windows 7 8 10 XP or Vista
Log into the printer server's webpage by opening your browser and going to 10.43.14.125
Turn on DHCP, save settings, reboot
Undo the changes you made to your computer. Reboot

Mar 06, 2017 | IBM AXIS 5600 (12r1361) Print Server

4 Answers

DPR-1260 ... prints but cannot access web config page


To get into the web configuration you need to know your firmware on the DPR-1260. If it is 1.12, us http://dlinkps-xxxxxx where the X's are the last 6 number of the mac address. If it is 1.20 and up, use http://dlink-xxxxxx, where the x's are the last 6 number of the mac address. If you do set it up as DHCP or static and know the ip address of the print server just type in the ip address of the print server on the address bar.

Oct 21, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...

Not finding what you are looking for?
Linksys WPSM54G Print Server Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...