Where print screen button on key board for hp ellitebook8440

There is a key on your keypad that labelled (print screen) it is usually located on the right top of your key board. locate the key hold down the ctrl key and tap the print screen key. open word or word pad hold down the ctrl key and tap the v key (shortcut to paste) and there you have it.

:D You have to open some image edit program for example PAINT, right mouse click-paste and then do whatever u want with your Screen picture- edit, print, save- anything! I hope this helps somehow :D

Some laptops don't have a PS key, it's shared with another one and uses the fN key.

You need to press PrtScr or Print Screen button to capture the screen to the clip board. I believe on your laptop you need to hold the fn key down to select it. On the bottom left of the keyboard is a key that has fn on it. Any key on your keyboard that has a second function will need the fn key to access this second key function. PrtScr button should be on the top row right hand side of the keyboard.

Hold down the fn key and press the PrtScr key and then you can paste it into a document or paint or whatever. The PrintScreen function works in versions of windows I have ever used, from Windows 3.11 for workgroups to Windows 8.

If your HP laptop is a wide screen with a full size keyboard and separate numbet keypad then the Prt Scr key also doubles up as the Home key it is located on the top row of keys on the Number keypad.
If your HP laptop is a standard laptop keyboard then the Prt Scr key also doubles as the Scroll key and it is next to the F12 key.

To access the Print Screen Button you have to hold the key marked FN down while doing so. This accesses the special character/Function Set that is built into the computer.

On my HP Pavilion DV9500 with Win7 64 bit (laptop was new in 2007 and had Vista), I have the same problem, and I press FN-insert/scroll key and this works as the print screen button. That's the function key together with the insert key, which is 2 buttons to the left of the print screen key.

numberpad on hp dv9000 Page 2 Hardware Canucks

On a laptop, the print screen button is designated by "prt sc" or "prt scn" -- look for a button in the upper right portion of your keyboard. You will need to press and hold the the Function (usually "fn") key then tap (press and release) the button with the designation for print screen on it. This takes a "snapshot" of whatever is on your entire screen and temporarily saves it to the clipboard (like a "copy" does when you copy and paste something). If you wish to just capture the active window, hold the Function key, hold the alt key, then tap the print screen key. This only works on some laptops, not all. The easiest way to get to the picture you just created is to open the program Paint. Once open, press and hold ctrl (control) and tap "v" - this will paste the snapshot of the screen or window. You can crop, circle things, etc in Paint, then save the file or print it.

If you mean the "print screen" hot key, most computers have two keys to hold down to capture the screen image that can then be "pasted" onto an image processing program. Usually "fn" or "shift" and one other key usually marked with "Prnt Scrn".

If you're talking about printing a document or photo, there isn't a "print screen". You have to be in a program...WORD, PhotoShop, etc...and use the "print" function accessed via the "file" menu at the upper left edge of the toolbar.

HP Officejet 9100 All-in-One Series - Changing the Fax Baud Rate Parameters Information It is possible to lower the transmission speed of the initial handshake of the HP Officejet 9100 to a lower value that may aid in compatibility and resolve 223, 232, and 283 errors. The following steps will walk you through configuring the setting. These are temporary settings. If the unit loses power, the settings need to be reconfigured. From the front panel:

1. Press and hold the * key for 3 to 5 seconds until the display screen reads Test -001+ .
2. Enter in 620 on the key board, and press the Check Mark and the screen will read Cfg param id:
3. Enter the parameter ____ on the key board and press the Check Mark.
   • 159 - Receiving Fax baud rate
   • 153 - Transmitting Fax baud rate
   The screen will read Cfg param val: 26
4. Enter in the value ____ and then press the Check Mark .
   • 0 = V.17 14400
   • 2 = V.17 9600
   • 6 = V.29 9600
   • 10 = V.27 2400
   Screen will read Test -001+
5. Press the Reset button until you get back to Ready *