Question about Taylor Ice Cream Makers

1 Answer

Compressor hpco taylor machine c723 shows compressor hpco on screen with beeping, what does it mean?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Taylor Expert
  • 35 Answers

Compressor hpco or (High Pressure Cut Out) means the high side pressure has went over the limit the machine has been set too. The safety is there to protect the compressor. If the machine is water cooled, the water flow has most likely been interrupted. So often the machine was moved for cleaning and the wheel is on the water hose. If the machine is air cooled, Either 1. the fan has stopped, 2. the condensers are dirty or 3. It's just too hot where you are trying to run the machine.

Soft Serve Parts C723
compressor hpco - model_c723ada-ntrk102vrythapb4yqnobf12-2-0.jpg

Posted on May 24, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

TAYLOR ICE CREAM MACHINE DISPLAYS HPCO COMPRESSOR.WHAT DOES IT MEAN AND HOW DO YOU REMOVE THIS CODE


HP co is a high pressure issue on the compressor. It could be a restriction in the orifice or the expansion valve. You need a valve and gage set.

Jul 16, 2017 | Taylor Ice Cream Makers

1 Answer

Compressor hpco code comes up on panel of Taylor soft serve ice cream machine? Does that mean lack of water to machine?


There is a very good chance. Often the water has been shut off, or a wheel is pinching the hose.

HPCO stands for High Pressure Cut Out. The high side pressure is regulated by the water valve on water cooled equipment.

These are links to parts in the water cooling system.
046686 Water Regulating Valve 3 8
048287 Condenser for Taylor Water Cooled machines Taylor 035174 Scraper BladeReplacement 17

046686-5jpt2eusobswb402obrm5sjf-3-2.jpg

May 28, 2017 | Taylor Ice Cream Makers

1 Answer

Taylor 8756-33. Which components operate in standby mode?


In standby mode, the machine just wants to keep the product refrigerated until it goes back into auto.

So, the mix cabinet needs to keep the product cool in the bottom of the machine, that requires the mix compressor and fans to run. The mix cabinet temperature is read by a thermistor probe and regulated by the (left side) logic board.

The product in the cylinders should go back to liquid form in standby, but we still have to maintain that safe food temperature, the motor and compressor will run periodically. If the machine is air-cooled a fan will run anytime the compressors run. If it is water cooled, water will flow through the machine when the compressor runs. The temperature in the freezing cylinders is read by a different thermistor probe and regulated by the logic boards.

Here is a link to all of the parts in a Taylor 8756.
http://www.softserveparts.com/c-1335911-parts-8756.html

f1efdb19-6ca9-408b-880a-c234233713ab.jpg

Jul 20, 2015 | Taylor Ice Cream Makers

1 Answer

Taylor ice cream machine tripping on auto


sounds like you have a bad motor or compressor short

Feb 23, 2015 | Taylor Soft Serve C706-27 Machine

1 Answer

TAYLOR ICE CREAM MACHINE DISPLAYS HPCO COMPRESSOR.WHAT DOES IT MEAN AND HOW DO YOU REMOVE THIS CODE


HPCO is an acronym for High Pressure Cut Out. The most common causes of this code are either an issue with the fan in air-cooled equipment, or an issue with water flow in water-cooled equipment. MOST of the time, someone has mistakenly shut off water to the unit, or moved the machine and pinched a water line with the caster wheel. A restriction at the expansion valve is a possibility but unlikely unless the refrigeration system has been opened recently, possibly to replace a compressor or other component.

If you would like to discuss your issue further with a technician, call 1-800-879-7839. http://www.softseveparts.com/

Sep 12, 2013 | Ice Cream Makers

Not finding what you are looking for?
Ice Cream Makers Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Taylor Ice Cream Makers Experts

Dennis Boxerman

Level 3 Expert

1037 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14584 Answers

Are you a Taylor Ice Cream Maker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...