Question about Exercise & Fitness

1 Answer

What do i do when my treadmill is stuck on pause.

I turned on... Pause shows.... hit pause... still pause... turned off... pause... unplugged... pause

Posted by on

  • 2 more comments 
  • johnny rebel May 05, 2017

    Go into engineering mode by pressing the stop and speed up button at the same time while inserting safety key. Once in mode, press the stop button once more then press the plus incline button. the incline should calibrate itself. If not then you might need a motor control board

  • Janice Ykema Art
    Janice Ykema Art May 05, 2017

    The safety is a magnet

  • Janice Ykema Art
    Janice Ykema Art May 05, 2017

    I will go and give it a shot, with what i have.

  • Janice Ykema Art
    Janice Ykema Art May 05, 2017

    Ok, got the panel to light up and incline shifted to position but it wont go still pause flashing across screen

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 604 Answers

Turn up speed

Posted on May 05, 2017

Testimonial: "nothing goes... its Paused!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Treadmill says fill with wax


Diagnostics is entered by holding the 'PAUSE' key when power is applied or by holding the
'PAUSE' key and pressing the 'CLEAR' key twice from any state.
The unit will take approx. 3 to 4 seconds to enter Diagnostics.
On entry to this state, the message:

USE ARROW KEY TO SCROLL THROUGH LIST till show on ddisplay the option "MAINTENANCE"

USE ARROW KEY TO SCROLL THROUGH LIST when display show the message "replace wax bag" press enter
the display show "repair logged" and exit press the key "clear"

Feb 05, 2013 | Life Fitness 91Ti Treadmill

1 Answer

When turned on, machine inclines up and down on its own while no conrols work


Let it finish. The unit is recalibrating. It will go all the way up, pause, then all the way down, then pause, then double beep. The console will return to normal. The unit was knock out of calibration by a voltage surge and the reason all treadmills should be on a surge protector when in use and unplugged when not in use

Jan 11, 2011 | Epic 425 Mx Treadmill EPTL88105 !

1 Answer

How do I access the service menu on a lifefitness 9500HR treadmill?


To get to the service menu start by pressing the pause button and keep it held down as you hit the clear button twice. The treadmill will reset and go into the service menu, and now you quite pressing the pause button.

Mar 31, 2010 | Life Fitness 9500HR Next Generation...

1 Answer

Communication timeout message on a display


You need to press and hold Pause,press clear twice. Continue to hold pause until the display reads SERVICE MENU. Press any up arrow and select SYSTEM TEST. then press enter in the desired mode,then the display will scroll automatically though available options. You want the first option which is SYSTEM COMM TEST hit enter upon do so it will perform test to communicate with all module within the treadmill. If a module does not respond to the upper console the a error message will display.

Mar 15, 2010 | Life Fitness 9500HR Next Generation...

1 Answer

My remote is stuck on pause. There is a pause


Sounds like the still is engaged hit the button again to turn it off.

Mar 14, 2010 | Televison & Video

1 Answer

How can i enter in manufacturers configuration menu on Lifefitness treadmill 97ti


To enter the Manager's Configuration, press and hold down the PAUSE key and press the
CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays
the words “SERVICE MENU”. Then, release the PAUSE key, press the QUICK START
key, and press ENTER. The MESSAGE CENTER then displays, in turn, each of the configuration
settings.

Jan 14, 2010 | Life Fitness 9100 Next Generation...

1 Answer

Pause mode stuck


Is the door firmly closed? Open the door and close it firmly. If the pause button is really stuck, you will need to repair/replace the board.

Oct 17, 2007 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Paused. now stuck. cannot open, turn off, etc.


Unpluggin the machine is pretty much the only way to reset it.Leave it unplugged for a couple hours if that doesnt work its most like a control board issue

Mar 15, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Tom Chichester

Level 3 Expert

33326 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...