Question about Televison & Video

2 Answers

My tv is on but the standby button keeps flashing and I cannot do anything with the remote either I've unplugged it and left if for 30 mins

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 58 Answers

What make and model of TV is this? If its a LCD tv thats more then a few years old chances are its the very common problem of failing capacitors in the power supply. That will usually cause the issue your describing. I have rebuilt dozens of tv power supplies now, the term commonly referred to now is re-capping the power supply. The capacitors become leaky and the voltages go out of tolerance and the tv will no longer turn on. If you can find someone to take it apart and check the power supply board inside that would be your best bet, otherwise its time for a new tv otherwise. There is no simple fix other then repair unfortunately.

Posted on May 04, 2017

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 46 Answers

Https://www.Abctay.com is an online shop ,
We sell television and electrical accessories,all kinds of TV power supply board, logic board, TV LED screen,
TV LCD screen, mobile phone screen, as well as various types of electronic tools,tv parts power supply,LCD,ccfl ,
LED,OLED,lcd panels,HMI,Inverter,LCD screen,lg screen,display screen,lcd monitor,lg lcd, lg monitor ,flat screen ,
touch screen,hmi,bulb,samsung, innolux ,Mitsubishi,philips, hitachi,auo,innolux,Planar, toshiba, siemens,chi mei,Weinview,
Infineon,industrial LCD,industrial control, sharp monitor,vigor plc,delta, mitsubishi lcd,omron plc,etc


wholesale Samsung BN44 00715A L55G2Q ESM PSLF151G06A Power Supply Used

Posted on May 10, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

10yr old Sanyo tv working fine then "mute"flashed on screen,tv went mute and wouldn't respond although everything else works normally.Not a flat panel-


try reseting the tv and remote.....unplug tv from the wall plug for 5 mins. then remove batteries from remote.....from left to right at the top of remote hit all the buttons on remote then put batteries back in try that......

Jan 16, 2016 | Sanyo Televison & Video

2 Answers

Panasonic tx 26lxd70


make this test for r.control use the digital camer or cell. When you hit any key you must see the LED ON, otherwise you must open the r.control for to clean da48b13b-b3c2-4350-aea2-883224ce8383.jpg the keypads from dirty, corrosion, etc, use the contact cleaner. tight the spring contacts batteries with plier for better contacts. and use alkaline batteries.

God bles you

Nov 04, 2013 | Televison & Video

1 Answer

Ge tv standby light keeps flashing


The power supply is failing

Feb 08, 2013 | Televison & Video

1 Answer

Bush TV Stuck In Standby Mode?


Could be an open internal fuse or power supply failure

Mar 06, 2017 | Televison & Video

1 Answer

My pioneer plasma tv in standby mode and wont turn on


Try restting it by unplugging the tv for a few mins and it should rest to original factory default settings but leave it unplugged 10-15 mins to be sure.

Dec 18, 2011 | Pioneer PDP-4270HD 42 in. Plasma...

1 Answer

The standby button is flashing twice- sony bravia klv-40v550a


Unplug the power cord for 30 min, plug back in and turn on.

Should ths not work seek repair or replacement

Apr 10, 2010 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

Will not power up. Stays in standby mode.


these particular tvs are very sensitive to voltage changes spikes etc.first turn off main power switch wait at least 30 sec if standby come on wait another 30 then turn off main power again and unplug tv for 1 min then plug in turn on main switch wait 30 sec then turn on tv with remote resets system.then buy a ups and always wait at least 30 min after turning tv off to turn back on if not causes power failure and after each press of power button wait 30 seconds before trying again lmk good luck

Jan 08, 2010 | Hitachi 42HDS69 42 in. Plasma Television

1 Answer

New Sharp Aquos LC37X20E. After 30 mins turns itself off to standby and comes back on after 2-5mins (even though the automatic return to stanby has been set to "disable"). Eventually after...


According to Sharp it is a software problem. Engineer came, installed software update ,10 minute job.....TV worked fine for 1/2 day unfortunately: Then images turned black and white in all channels TV turned itself off, and stanby and OPC buttons started flashing. When TV came back on its own 10 mins later , screen had 2 large square staines superimposed in image (as if it was a burnt screen)...Engineer will be back next week...all quite sad really for a new TV.....will keep u posted

Jul 03, 2008 | Sharp Televison & Video

2 Answers

Sony KV-32HX15U Flashing standby light


Hi. Thats a nice tv you have there. If your able to get free estimate from repair shop go for it. It could only be dry joints but it could be loptx & other components which could be pricey.

Sep 23, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5097 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...