Question about Dryers
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Hunter remote Model 27185. Light
There is no fused protection in the receiver -- I just had the same problem. When replacing a bulb, somehow the bulb arced in the socket on the fan and blew out the unit. Time to replace the unit. I may put an inline fuse this time for protection.
Posted on Mar 14, 2009
Simple things to check - sometimes the vibration from the fan will cause the wires to come loose. Drop the fan and make sure both wire nuts are secure - take the opportunity to check and make sure you have voltage (using a voltmeter or a 110v test light) at the junction box. Do you have lights on the fan? Do they come on? If you have power to the fan, something is amiss inside the fan such as a faulty speed switch or connection.
Posted on Jul 20, 2009
SOURCE: Fridge portion no working
As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...
Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...
Posted on May 20, 2010
SOURCE: The fan doesn't work on
Can't remember where they are exactly on yours but there are a group of three or four relays either back on one of the fenders or on the firewall. One of those is for the fan.
Posted on May 16, 2011
SOURCE: I have a Hunter ceiling
I'm assuming your fan is connected to a switch on the wall,if it doesn't turn the fan or light on,as your remote doesn't,then your electrical wires have come loose causing you not to have power to fan,you will have to remove the parts to get to your wing nuts holding your wires together to make a good connection and put electrical tape over wing nuts and wire to keep together,vibration will cause them to come loose,make sure you turn power off at breaker.
Posted on Aug 29, 2011
Tips for a great answer:
Jul 13, 2014 | Heritage (5BUW52NK2YQ) 52" Ceiling Fan
Jun 25, 2012 | Cars & Trucks
Sep 25, 2011 | Heating & Cooling
Aug 03, 2011 | Hunter Heating & Cooling
Jul 11, 2017 | Hunter Sontera 52" Ceiling Fan with...
Sep 03, 2017 | Hampton Bay 60 In. St. Regis Fan, Ancient...
Oct 02, 2009 | Refrigerators
Jul 20, 2009 | Hampton Bay 24750 Huntington III Ceiling...
Apr 03, 2008 | Hunter 27185 Remote Control
27 people viewed this question
Usually answered in minutes!