Question about The Computers & Internet

1 Answer

How to Change the Service VLAN to Which the xDSL Port Belongs

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 12 Answers

Changing the service VLAN to which an Huawei xDSL port belongs means changing the service port configuration, namely, the PVC configuration, of an xDSL port. To change the service VLAN, run the undo service-port command to delete the service ports (PVCs), and then configure a new VLAN for the Huawei xDSL port.
The prerequisites for deleting a service port are as follows:
When you specify parameters, all the matched service ports will be deleted.
A service port cannot be deleted in the following conditions:
The port is encapsulated as PPPoA, IPoA, or Auto.
The port contains the BTV user.
The port is bound with an IP address or a MAC address.
The port is configured with a static MAC address.

Huawei MA5600
Huawei MA5616
Huawei DSLAM

Posted on May 04, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why the Huawei S2700 switch cannot transparently transmit the packets whose VLANID is greater than 127 after VLAN translation is enabled?


Take the Huawei S2700-9TP-SI-AC for example:
After the VLAN translation function is enabled for the Huawei S2700 switch, the 128 module problem exists because the chip difference supports only 128 VLAN TO VLAN entries.
The packets received through the port are processed as the VLAN smaller than 128. The calculation method is (vlanid)%128.
Therefore, for a VLAN greater than 128, port vlan-mapping vlan id map-vlan id, that is, the mapping from the VLAN to the same VLAN, must be configured for the transparent transmission to be implemented.
More related:
Huawei S2700-9TP-EI-AC
Huawei S2700-9TP-EI-DC
Huawei S2700-9TP-PWR-EI

May 11, 2017 | Huawei Computers & Internet

1 Answer

How to enable two xDSL ports of the MA5600 to communicate with each other?


Two xDSL ports of the Huawei MA5600 communicate with each other through service ports.
If the two Huawei xDSL ports are on different boards, establish a standard VLAN, create one service port for each Huawei xDSL port, and then add the created two service ports to the established standard VLAN.
NOTE:
The service ports can be added to the standard VLAN only when the attribute of the VLAN is QinQ.
If the two xDSL ports are on the same board, establish a super VLAN, create one service port for each Huawei xDSL port, and then add the created two service ports to the sub VLAN of the established super VLAN.

Apr 19, 2017 | The Computers & Internet

1 Answer

How Do I Restore the Default VLAN Configuration of an Interface?


We can take S5700-28P-PWR-LI-AC as example.

The default VLAN configuration of an interface involves the default VLAN of the interface and the VLAN that the interface joins. By default, the default VLAN configuration of an interface is as follows:
Access: The default VLAN is VLAN 1, and an access interface joins VLAN 1 in untagged mode.
Trunk: The default VLAN is VLAN 1, and a trunk interface joins VLAN 1 to VLAN 4094 in tagged mode. That is, a trunk interface allows all VLANs.
Hybrid: The default VLAN is VLAN 1, and a hybrid interface joins VLAN 1 in untagged mode.
Dot1q-tunnel: The default VLAN is VLAN 1, and an dot1q-tunnel interface joins VLAN .1
Negotiation-auto or Negotiation-desirable: If the interface is negotiated as an access interface, the default VLAN configuration of the interface is the same as that of the access interface. If the interface is negotiated as a trunk interface, the default VLAN is VLAN 1 and the interface joins VLANs 1 to 4094 in tagged mode. That is, the interface allows all VLANs.
Run the display this include-default ' include link-type command in the interface view to check the link type of the interface, and then perform one of the following configurations to restore the default configuration of the interface.
Restore the default VLAN configuration of an access or dot1q-tunnel interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port default vlan

Restore the default VLAN configuration of a trunk interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port trunk pvid vlan
[HUAWEI-GigabitEthernet0/0/1] undo port trunk allow-pass vlan all
[HUAWEI-GigabitEthernet0/0/1] port trunk allow-pass vlan 1

Restore the default VLAN configuration of a hybrid interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port hybrid pvid vlan
[HUAWEI-GigabitEthernet0/0/1] undo port hybrid vlan all
[HUAWEI-GigabitEthernet0/0/1] port hybrid untagged vlan 1

Restore the default VLAN configuration of the Negotiation-auto or Negotiation-desirable interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port default vlan
[HUAWEI-GigabitEthernet0/0/1] undo port trunk pvid vlan
[HUAWEI-GigabitEthernet0/0/1] port trunk allow-pass vlan all

Jun 28, 2016 | Compex PS2216 16Port 10100Mbps Smart...

2 Answers

How to configure VLANS and Tagging


https://m.youtube.com/watch?v=krE16IRIHw4
Watch this video for switch port access . You will need to be in global config interface mode.

Jun 05, 2016 | HP ProCurve Computers & Internet

1 Answer

Do all PTN need MPLS technology ?


Needn't,MPLS belongs to 2.5 layer,data communication protocol.You should master MPLS-TP protocol,MPLS-TP=MPLS-IP+OAM.PTN and VLAN have some connection,A VLAN PTN in each business correspondence

Aug 10, 2015 | eMachines Ultra-Slim ER1401-57...

2 Answers

Can the Lan port of AR1220-S or AR2204-S be divided VLAN? Please help!


AR1220-S the two layer ports, can divide 8 VLAN, one port for a VLAN, the AR2204 can not divede VLAN. Huawei AR1200 Series routers are designed to provide secure and scalable unified voice and data communications for small enterprises or large enterprise branch offices. It supports wired and wireless access modes, including E1/T1, xDSL, xPON, WiFi, 3G, and more.
More information about Huawei router,please visit:c:\docume~1\admini~1\locals~1\temp\[5uq[bl(6~bs2jv6w}n6[%s.pnghttp://huaweirouter.blog.com

Mar 28, 2014 | Computers & Internet

1 Answer

How can I change the default management vlan (vlan 1) to another vlan # in Cisco Aironet 1242G wireless AP


create a new vlan (eg vlan 10)
then ensure that the ethernet port is the same bridge group number as the new vlan (bridge-group 10)
do the same for the wireless port

then shut down vlan 1

Oct 06, 2009 | Cisco Aironet 1242ag 802.11a/b/g Wireless...

1 Answer

How can i make 3 vlans without accessing each vlan port or each vlan are private or each pc onnected to each vlan are block and can't access each pc's


create a vlan and add a port into that vlan and connect a pc into that vlan
do the same for all 3 pcs making sure that the same vlan id is never used

Jul 17, 2009 | Computers & Internet

1 Answer

ZyXEL IES-1000 with AAM1212 ADSL 12 port module step-by-step guid


Going through the GUI would take too long, so use CLI to add the commands below. After that, check the GUI and see how those changes appear.

VLANs:
On all equipment use 802.1q tagging. The example below puts adsl ports 1 to 10 in vlan10 and ports 11-12 in vlan2. These vlans are 802.1q tagged on the ethernet ports.

switch vlan set 1 1~12:X enet1~enet2:FT DEFAULT
switch vlan set 2 1~10:X 11~12:FU enet1~enet2:FT VLAN2
switch vlan set 10 1~10:FU 11~12:X enet1~enet2:FT VLAN10
switch vlan set 17 1~12:X enet1~enet2:FT VLAN17
switch vlan pvid 1~10 10
switch vlan pvid 11~12 2
switch vlan pvid enet1~enet2 1
switch vlan priority * 0
switch vlan gvrp * disable
switch vlan frametype * all
switch vlan cpu set 1

ATM circuit:
Each port requires one or more VPI/VCI circuit. You could map different circuits to corresponding vlans. The config below creates a primary circuit 1/35 on each port. On ports 5 and 9 is another circuit 1/32 mapped to vlan10

adsl pvc set * 1 35 super DEFVAL
adsl pvc set 5,9 1 32 10 0 DEFVAL

Remember a dslam is just a switch, bridging packets from a VC onto a VLAN or straight onto ethernet.

Mar 27, 2009 | Zyxel IP Express IES-1000 (91004098002)

2 Answers

VLAN


no competent guys out there ???

Apr 19, 2008 | IFS EtherNav D7600 8-Port Ethernet Switch...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top The Computers & Internet Experts

d3yavu3

Level 2 Expert

57 Answers

kimblebear

Level 1 Expert

9 Answers

baklogic

Level 1 Expert

23 Answers

Are you a The Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...