Question about Televison & Video

Open Question

The reason why the eskom's executive board seems to have failed to understand the growing demands for power supply and plan accordingly

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Ad
  • 78 Answers

SOURCE: 2pin male connector of the motherboard (261671-001) purpose?

the switching power supplies are fun, by 2 pin plug is that from the AC side or computer side?

from AC side its easy enought to go buy another plug thought it should have come with one.

i cant remember any 2 pin plugs on the computer side and i have taken quite a few of these apart. there is a four pin plug...

wire colors,
yellow 12 volt
black ground
red 5 volt,

if the old supply was any of those colors you can desolder from the old supply and re solder it onto the new supply. if it was another color then i would suspect a random signal wire or cutout, keep you from frying yourself with the case open... try plugging up the new supply and turning on the computer if it runs why worry about it?

Posted on Jun 10, 2010

ssimons47
  • 9153 Answers

SOURCE: The reasons why the eskom executive board seemsto have failed to understsnd the growing demsnd for power supply and plan accordingly

non repair question on fixya. denied

Posted on Aug 23, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power in Craigieburn Umkomaas


There is a question as to whether or not this interruption of power is unusual. 95% of power in South Africa comes from Eskom. There appears to be issues regarding power outages. You can call the company and get a trouble ticket but if history is relevant, it may be hours before power is restored.

Your alternative power supply would have to be from a pruchased generator.

http://www.eskom.co.za/Pages/Landing.aspx

Sep 16, 2017 | Cars & Trucks

1 Answer

Philips 50 inch plasma black screen


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Mar 07, 2017 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

I was watching TV from the on demand feature for about one hour, and then all of a sudden i heard a pop. Like a fuse pop and the screen went out the visual and the audio. The red LED indicator on the left...


The tv power supply board is the causes and the problems.That the board,where the power a/c cord plug into it.Power supply board probally have dying capacitors parts.Dying or dead capacitors are alway bulging or puffing up on it tops.U have all the tools and understanding basic electronic also can do basic soldering?Check the power supply board carefully for dying or dead capacitors and replace it with new capacitors with same Micro ferid and the voltages higher 5 or 10 voltages higher for better heat resistance.Or try website like Ebay.com to buy a whole refurbish power supply board for the replacement.

Mar 26, 2011 | Panasonic TH58PX600U 58 in. Plasma HDTV

1 Answer

We have black line running through out tv that seems to be growing. Is there a way to fix it or stop it from growing?


Lines on all source input?
Vertical (usually bad LCD panel, T-CON board, main board).
Horizontal lines (power supply, main board).
Post the pictures of the screen for us?

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.

Dec 31, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

My 47 inch lcd tv screens goes pitch black randomly for a few seconds at a time, no reason. The sound is still audible in the background so the probelm is just with the picture. any suggestions


Either 3 boards may cause this issue and need servicing before it grows into a larger more expensive problem.....

Inverter boards
power supply
Time control board

Its a sustain problem and a really easy repair shouldn't cost too much.........


Nov 03, 2009 | Televison & Video

1 Answer

How much does it cost to repair a ps3 with a


If your not technically inclined, Sony will charge $149 as according to the people of this board:

http://boardsus.playstation.com/playstation/board/message?board.id=ps3&thread.id=1967987

or according to this page about $100:

http://answers.yahoo.com/question/index?qid=20081027082956AAq2HA3

My guess would be to take it to a local repair shop near you as they may not charge as much. The blinking lights that you are referring to usually mean the power supply has gone bad and power supplies don't run much. This guy thru Ebay has the power supplies for $50 and thats with free shipping. Don't know the guy personally but $50 seems reasonable if you know how to get into your ps3 and take out the old power supply and put the new one in.
http://cgi.ebay.com/PLAYSTATION-3-PS3-POWER-SUPPLY-APS-226-OR-ZSSR5391A_W0QQitemZ300319803458QQcmdZViewItemQQptZVideo_Games?hash=item45ec748842&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1234|240%3A1308|301%3A1|293%3A1|294%3A50

Really its up to you. Its not hard taking the ps3 apart. Just taking a few screws out from the bottom and then a few from the top and taking the top cover off and exposing the ps3.

Jun 21, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Optiplex GX520,270,280,755,745 ONBORD COM PORT AFTER DAYS WILL FAULTY


A surge protector stops power surges from eskom etc. from fryin your mother board and power supply. when the power goes off sometimes its just a phase . when all phases are off and the power comes back to all Phases instantly at a strong output this can fry your mother board or damage your power supply . surge protector keeps the power at one level even if it isnt , make sense? Also see UPS.Lightning can do the same effect too

Jan 18, 2008 | Dell OptiPlex GX520 PC Desktop

1 Answer

LG42PC1D failure to switch on


Usually this problem is caused by poor solder connections on the main power supply board. The unit being a plasma tv has many supply voltages and sometimes has multiple power supply boards. By removing these boards and resoldering any suspect connections, the problem is usually resolved. Many companies will do anything to avoid repairing a unit that is working, even intermittantly. Call the responsible parties and demand that they service your unit properly, not brush you off. Scrivitron

Jun 11, 2007 | LG 42PC1DA 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74858 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5263 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...