Question about Computers & Internet

Open Question

Weather station 500 w

Displays on wi fi will not log on

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Joed911
  • 4338 Answers

SOURCE: can't get onto internet

Go to Preferences (prefs) and make sure that the network is set to WiFi, then go to Wifi and make sure that the wireless radio is turned on. Then click on setup, let it scan for any available network. Then when it finds the network, click connect.

If that does not work, you may need to do a hard reset to set it back to default settings.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Feb 08, 2009

Ad
  • 93 Answers

SOURCE: wi-fi

You probably called their customer support or billing, which know nothing about technical stuff.

Wi-fi is completely independent from the cellular network, so it will not charge you anything. Wi-fi just connects to a wireless router, like the one in your home, if you have one. In other words it connects to the internet via someones home/office internet connection. I have a touch diamond and dont have a data plan, and only use wifi, works great..BUT:

If you do not have a data plan (pay as you go data) with Bell, IMMEDIATELY get a 'data block' on your phone, at first they might say oh it will not let you use some functions, etc, put insist, persist, and use force if neccesary as they dont like giving you a data block..It costs about $50 per mb if you use the pay per use internet! I think that was the 1X, but im not sure, its ridiculously high!

Posted on Mar 08, 2009

  • 93 Answers

SOURCE: wi-fi

No, wifi is completely seperate from the cellular network. It will not cost you anything, but will depend on whether or not there are wireless routers/networks near you and if they are secured (with a password) or not. Wi-Fi is basically a home/office internet connection, just wireless.

For example, all starbucks has 'wi-fi'.

If you don't have a data plan for your phone, get a data block immediately from Bell. They dont like giving data blocks, and they say some functions wont work but they mean stuff that connects to the internet, which will cost you if you wifi isn't connected since it defaults to the cellular providers internet. It cost be about $12 for less than half a MB of usage. Their rate per MB is more than $50, im not kidding.. just checked my bill. If you just got the phone you can get the charges reversed just say you didn't know it would connect to the cellular web and that it cost so much etc etc. They should be lenient if you just got the phone etc...

Posted on Mar 08, 2009

  • 4 Answers

SOURCE: I cant log in to my sky email error 500 but can

You can try deleting the cookies and the Temp Files. You can do that going to the internet explorer, Tools- Internet Options.

Posted on Nov 14, 2009

SOURCE: I have a problem witch wi-fi. my wi-fi can'not

here is the download link for your Wi-Fi driver

For Windows Vista : 

http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_wifi_realtek_28824A.exe

For Windows 7 : 

http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_wifi_atheros_TC00190600E.exe

Download and install the driver according to your operating system.

Your Wi-Fi will work fine now.

That's it.

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can'tload Web pages but wifi is on. Am using windows 8. What can I do to solve the priblem


There is a difference between Wi-Fi being on and Wi-Fi being connected. In Settings you can turn on Wi-Fi. All this does is turn on the Wi-Fi radio receiver.

With the receiver turned on you should then be able to view a list of Wi-Fi routers. You will probably see a little lock towards the bottom of the virtual radio signal symbol. These locked Wi-Fi stations cannot be connected to unless you have the right password to log onto them. Most people these days have secured their Wi-Fi routers so unauthorized folks cannot use them.

If you are using your own home router or wireless hotspot from a telecom, you will still have to select it from the list of Wi-Fi routers shown and click connect. If you haven't already entered a password, you will have to enter one.

This can all be done from them Charms menu that slides out on the right. Click Settings and Wi-Fi available.

Mar 02, 2015 | HP Pavilion dv6000z Notebook

1 Answer

How do you change the channel


I think first you need to setup wi-fi and enter the SSID code. setting wi-fi in iphone and ipad are all most same process..
Here is a blog to setup iphone and ipad with wi-fi

http://blog.vtechsquad.com/2013/02/28/how-to-connect-your-iphone-to-wi-fi/

Apr 08, 2013 | Belkin Play N600 Wireless Dual Band Router...

1 Answer

My iphone does not work on w.i.f.i. or 3g, my friend has a camera set up and can only view the pictures on my iphone when my router is switched on


You can manipulate iPhone's settings to refresh flaky network connections, or reinstate lost ones, while physically moving closer to a Wi-Fi base station when needed. You can also improve your Wi-Fi base station or wifi router performance to overcome typical Wi-Fi issues.

Jun 16, 2012 | Computers & Internet

1 Answer

MY SONNY ERICSSON X8 WHY I CAN'T GET THRU IN WIFI


To connect to a WLAN via Wi-Fi™:
  1. From the Home screen, find and tap Settings.
  2. Tap Wireless controls > Wi-Fi settings.
  3. Mark the Wi-Fi checkbox. Available Wi-Fi™ networks are displayed in a list under Wi-Fi networks. The available networks may be open or secured. This is indicated by the icon next to the network name.
  4. Tap a Wi-Fi™ network to connect to it. If you are trying to connect to a secured Wi-Fi™ network, you are asked to enter the security key for that Wi-Fi™ network before you can connect to it. The Wi-Fi™ connection is displayed in the status bar once you are connected.
Useful tip:
  • The next time you connect to a Wi-Fi™ network, the phone will remember the security key.
  • To enable Wi-Fi™ network notification of open networks, mark the Network notification checkbox.
  • To connect to another Wi-Fi™ network, just tap another Wi-Fi™ network in the Wi-Fi networks list.
  • To scan for Wi-Fi™ networks manually, press the Menu key and tap Scan. The phone scans for Wi-Fi™ networks and displays them in the Wi-Fi networks section.

You can also try updating your softwares by going to the sites below;

Update Service,
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax8?cc=gb&lc=en

PC Companion,
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pccompanion/xperiax8?cc=gb&lc=en

Start the program and just follow the on-screen instructions.

I hope this will help.

Jun 16, 2011 | Sony Ericsson XPERIA X8 Cell Phone

1 Answer

How to connect to the wifi with 3g iphone


Hello Jane,

When using a Wi-Fi network with your iPhone, you may occasionally encounter the following issues,Unable to locate or join a nearby Wi-Fi network,Weak or low Wi-Fi signal strength,Connected to Wi-Fi network, but unable to access the Internet.
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again. Verify that you are in range of your Wi-Fi router or base station. Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on. Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet. Update your Wi-Fi router to the latest firmware.

Jun 03, 2011 | Lands Phones

1 Answer

The router is blinking a yellow light


Here are some of the more common reasons that the status light may blink amber:
  • The Wi-Fi base station has not yet been configured because it is new.
  • The Wi-Fi base station has been reset.
  • A new firmware update is available for the Wi-Fi base station.
  • No IP address is available for the Wi-Fi base station.
  • A Wi-Fi base station in Extended Mode is out-of-network Wi-Fi range of a primary Wi-Fi base station.
  • The WAN Ethernet cable is unplugged from the Wi-Fi base station.
  • The Wi-Fi base station lacks a path to the Internet (or local router).
  • Internet access may be temporarily unavailable from your Internet Service Provider (ISP).
  • Your AirPort Time Capsule has detected that the internal hard drive has reported a SMART error, and is failing (This requires firmware 7.5.2, and AirPort Utility 5.5.2).

Feb 10, 2011 | Apple AirPort Extreme Router

1 Answer

WLAN orange light blinking


Wi-Fi base station: Understanding and resolving a blinking amber status light Your Wi-Fi base station status light blinks amber.
Here are some of the more common reasons that the status light may blink amber:
  • The Wi-Fi base station has not yet been configured because it is new.
  • The Wi-Fi base station has been reset.
  • A new firmware update is available for the Wi-Fi base station.
  • No IP address is available for the Wi-Fi base station.
  • A Wi-Fi base station in Extended Mode is out-of-network Wi-Fi range of a primary Wi-Fi base station.
  • The WAN Ethernet cable is unplugged from the Wi-Fi base station.
  • The Wi-Fi base station lacks a path to the Internet (or local router).
  • Internet access may be temporarily unavailable from your Internet Service Provider (ISP).
  • Your AirPort Time Capsule has detected that the internal hard drive has reported a SMART error, and is failing (This requires firmware 7.5.2, and AirPort Utility 5.5.2).
A persistent, blinking, amber status light indicates that your Wi-Fi base station may require your attention.
How to resolve a blinking amber status light alert
Launch AirPort Utility to determine why your Wi-Fi base station status light is blinking amber.
Apple recommends that you use AirPort Utility 5.5.2 for Mac, AirPort Utility 5.5.2 for Windows, or a newer version of AirPort Utility if one is available.
  1. AirPort Utility 5.2 or later opens automatically if your Wi-Fi base station requires your attention. You may also choose to launch AirPort Utility at any time.
    Do not use any version of AirPort Utility earlier than 5.0.
    In Mac OS X, AirPort Utility is located in the Applications > Utilities folder.
    In Microsoft Windows, AirPort Utility can be located by clicking Start > All Programs > AirPort.
    Note: You may also locate and download the latest Wi-Fi base station firmware and software by clicking here.
  2. In the AirPort Utility window, locate your Wi-Fi base station and double-click on it to open the Summary window. Note: If you have more than one Wi-Fi base station, double-click on the icon for the Wi-Fi base station that has the amber circle next to it.
  3. When the Summary window appears, double-click the amber circle to the right of Wi-Fi base station Status to open the Status window.
  4. The Status window lists any conditions that require your attention. Respond to each item until there are no more items listed.
    Important
    : You must reset the Wi-Fi base station using the reset switch to re-enable checking for the conditions you ignored.


  5. Eliminating the blinking, amber status light may require making changes to a specific setting, or putting a checkmark in the "Ignore" checkbox beside any option you don't wish to change. A checkmark simply tells the AirPort that you are aware of the issue and you have chosen to ignore it. For example, you may wish to leave your AirPort open without a password so that anyone can join your wireless network.
  6. Click Update to apply your changes (the Wi-Fi base station will restart).
  7. After the Wi-Fi base station has restarted, the status light should be green and not blinking. If the status light stays amber in color and blinks after the Wi-Fi base station restarts, you may repeat the steps above.

Oct 03, 2017 | D-Link (DI-784) Wireless Router

1 Answer

I have a Dell Latitude D610. At home, myy wi-fi signal typically runs at 48-54 Mbps and signal strength reads as "very good". When I drop my notebook into a D-family docking station (plugged in peripherals...


no
but may as you know that the anttena for wi fi in the laptops located in the side of monitor so it is polarization issue sure when you open the laptop screen it will be different when you close it to put it inside the docking station>>>to solve this you can change the direction of your router anttena


wish that will be helpfull
shadi

Nov 21, 2009 | Dell D/Dock Expansion Station Docking...

1 Answer

I cant log in to my sky email error 500 but can log on with my laptop with wi fi


You can try deleting the cookies and the Temp Files. You can do that going to the internet explorer, Tools- Internet Options.

Nov 07, 2009 | Acer Computers & Internet

2 Answers

Cannot get ipod touch to connect to wireless network


Many Wi-Fi issues can be resolved by doing the following:
Basic troubleshooting
  • Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
  • Verify that you are in range of your Wi-Fi router or base station.
  • Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
  • Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.

Jan 01, 2009 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...