Question about Exercise & Fitness

1 Answer

My manual does not tell me how to turn off demo mode on my console and I need to turn it off Model #NordicTrack x22i treadmill incline

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 25 Answers

  • roperly connected to the NordicTrack and plugged fully into a grounded electrical outlet if the machine does not turn on. If the unit is plugged in correctly, look at the reset switch, located on the frame near the power cord. If the switch is flipped open, wait five minutes then push the switch back in.
  • Remove the key from the console, wait a minute and reinsert the key back into the console if the buttons on the console are not functioning properly. If the console stays on when the key is taken out of the console, the device is likely still in "Demo" mode. Hold down the "Stop" button for a few seconds to turn off the "Demo" mode and restart the unit.
  • Turn the machine off and unplug the machine if the console display is not working correctly. Wait a few minutes and plug the machine back into the electrical supply and turn on. The console should now operate correctly.
  • Hold down the "Stop" and "Speed" buttons at the same time if the incline is not changing as desired. Insert the key into the console while holding down the buttons and then release the buttons. Press the "Stop" button and the arrows to increase or decrease the incline. This will cause the incline to recalibrate. Remove the key from the console unit.
Sponsored Links

Posted on May 03, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nordictrack exp 1000X will only run on pre-programmed


When in Demo Mode, the console will go through a repeating lighting pattern. This mode will only become active when the treadmill is plugged in, the main on/off switch is turned on, and the safety key is not inserted into the console.
The Demo Mode was added to attract attention to the treadmill while it is on display. By default, all treadmills with Demo Mode will come with it turned on. Demo Mode can be turned off at any time.

ethod #1 to switch from the Demo Mode:
1.the STOP button while inserting the safety key tPress and hold o enter the user information mode.
2.Look in the Calories window. When Demo Mode is active, the letter 'd' will appear.
3.Press the SPEED DOWN button to toggle the mode on and off.
4.Once the mode is set as desired, remove the safety key.
Follow the steps and fix it.
God bless you

Jan 18, 2013 | Exercise & Fitness

1 Answer

Console buttons dont work, deadman key removed goes into demo mode...


Adjust the REED swicht , see diagram, clean it, and tight the plug very well.

2) clean the ribbon cables, for keypads, clean it.
3) tight the connector from display board vs lower board too
see the block diagram
After you fix it. RUN the software calibration for diagnostic, troubleshooting. too
God bless you

10_11_2012_10_21_16_am.gif10_11_2012_10_21_34_am.gif

Oct 10, 2012 | NordicTrack Exercise & Fitness

1 Answer

Nordictrack COmmercial 1500 console buttons don't work


http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnes

11_17_2011_8_43_24_pm.gifsincerely. Please keep me in touch.

Nov 17, 2011 | Nordic Track NordicTrack Commercial 1500...

1 Answer

Error 100 won't connect to network anymore to use ifit live


Check the power cord to ensure it is connected to the power supply and the treadmill if the power does not stay on or does not turn on. Look at the circuit breaker, located near the base of the unit, to see if the circuit was tripped. Push the switch back in to reset the circuit.

  • 2 Take the key out of the console, wait a minute and place it back in the console to resolve issues with the power turning on and off during use or if the console displays are not functioning properly.
  • 3 Remove the console key and press the "Stop" button to turn off the "Demo" mode, which is often the default setting when the treadmill is first purchased.
  • 4 Reset the incline by holding down the "Stop" and "Speed increase" buttons and putting in the console key. Release the buttons and then press the "Stop" button, followed by the down or up arrows for the incline. This step can be taken if errors are occurring with the incline function.
  • 5 Turn the treadmill "Off" and unplug the unit if errors continue. Wait five minutes and then plug the unit back on, insert the console key, and turn the treadmill "On." This will reset the treadmill and should return to normal funcTION
  • Oct 04, 2011 | Nordic Track NordicTrack Elite 9500 PRO...

    1 Answer

    My nordictrack is stuck on a program &wont let u do anything else..cant change the speed or incline &the fans wont turn on..its like the consol is frozen or stuck on a program..how can i reset it...


    How to Troubleshoot a Nordic Track C2500 X15616db0-ef56-4f0a-afbd-b1ae3379f47f.small.jpg Jolie Johnson

    Based in Austin, Texas, Jolie Johnson has been in the fitness industry for over 12 years and has been writing fitness-related articles since 2008 for various websites. She received her Bachelor of Arts in English and philosophy from the University of Illinois.
    By Jolie Johnson, eHow Contributor

    updated April 15, 2011

    Related Searches:

    The NordicTrack is a treadmill designed for in-home use. It offers a speed range of 0 to 10 mph and an incline range of 0 to 10 percent. It folds up vertically to save space when you aren't working out and can be rolled to a different room. The console has 16 preset workout programs and features iFit interactive technology. If you have problems with the console or walking belt, you can often fix them yourself with some basic troubleshooting steps
    Instructions

    1. Power Turns Off When You're Using the Treadmill
      • 1 Check the reset switch on the bottom of the treadmill near the power cord. If it has tripped, the top of the switch will protrude. Wait 5 minutes then press the switch.
      • 2 Check that the power cord is plugged in completely. If it is plugged in, unplug it, wait 5 minutes then plug it back in.
      • 3 Remove the magnetic key from the console then reinsert it.
      The Console Won't Turn Off
      • 1 Insert the magnetic key into the console. Your C2500 is stuck in demo mode if the console won't turn off after you remove the magnetic key from the console.
      • 2 Hold the "Stop" button down for a few seconds.
      • 3 Press the "Speed" down (-) button. Remove the magnetic key.
      The Incline Does Not Change Correctly
      • 1 Press and hold the "Stop" and the "Speed" up (+) button. While holding the buttons, insert the key into the console, then release the buttons.
      • 2 Press either the "Incline" up or down arrow button. Wait while the incline raises and lowers. This recalibrates the incline system.
      • 3 Remove the key from the console.
      Walking Belt Slows
      • 1 Unplug your C2500 and remove the key from the console.
      • 2 Turn both rear adjustment bolts, located on the back of the walking deck, to the left, a 1/4 turn.
      • 3 Lift the edge of the walking belt in the middle of the deck. You should be able to lift it 2 to 3 inches off the walking platform. If the belt is still too tight, loosen the bolts another 1/4 turn each.
      • 4 Plug the treadmill in and reinsert the console key. Walk on the belt at a slow speed to see if it still slows. Repeat Step 2 if necessary.

    Sep 27, 2011 | Nordic Track NordicTrack Treadmill, A2550

    1 Answer

    I have a 2yr old A2550 which just recently started showing only demo information. The belt would not come on nor would the key change the system to manual mode. I used information mode just to see if...


    When in Demo Mode, the console will go through a repeating lighting pattern. This

    mode will only become active when the treadmill is plugged in, the main on/off switch

    is turned on, and the safety key is not inserted into the console.

    The Demo Mode was added to attract attention to the treadmill while it is on display. By

    default, all treadmills with Demo Mode will come with it turned on. Demo Mode can be

    turned off at any time.

    Method #1 to switch from the Demo Mode:Press and hold the STOP button while inserting the safety key to enter the user

    information mode.

    Look in the Calories window. When Demo Mode is active, the letter 'd' will

    appear.

    Press the SPEED DOWN button to toggle the mode on and off.
    Once the mode is set as desired, remove the safety key.

    May 17, 2011 | Nordic Track NordicTrack Treadmill, A2550

    1 Answer

    Nordictrack exp 1000 xl not shutting off


    Your treadmill is in "Demonstration mode".
    Here are the instructions to shut it off.
    First you must enter "Information mode".
    To select the information mode, hold down the Stop
    button whilst inserting the key into the console. When
    the information mode is selected, the following information
    will be shown:
    Total number ofhours that the treadmill has been used.
    The Distance/Incline display will show the total number of miles.
    An "E," for English miles, or an "M," for metric kilometres.
    If a "d" appears in the display, the console is in the "demo" mode.
    Press the Speed - button so the Heart Rate/Calories display is blank.
    To exit the information mode, remove the key from the console.

    Please be advised, when the safety key is removed THE TREADMILL IS NOT SHUT OFF, only the console is shut off. You must turn the machine off using the power switch in the front of the machine near the power cord, or I recommend purchasing a power bar with a power switch and turning the power off at the power bar.

    Mar 01, 2011 | Nordic Track Exercise & Fitness

    2 Answers

    A2350 doesn't start, just cycles through programs on display


    This is just the store display mode it comes with - check the manual, it should tell you how to easily turn off the store display mode.

    Jun 20, 2009 | Nordic Track NordicTrack Treadmill, A2550

    Not finding what you are looking for?
    Exercise & Fitness Logo

    Related Topics:

    57 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Exercise & Fitness Experts

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Sportsmith LLC
    Sportsmith LLC

    Level 3 Expert

    914 Answers

    Tom Chichester

    Level 3 Expert

    33322 Answers

    Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...